From: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
To: shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org
Cc: fabio.estevam-3arQi8VN3Tc@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
Subject: [PATCH 6/9] ARM: dts: imx7-colibri: specify usdhc1 supplies
Date: Wed, 6 Dec 2017 16:30:02 +0100 [thread overview]
Message-ID: <20171206153005.6144-6-stefan@agner.ch> (raw)
In-Reply-To: <20171206153005.6144-1-stefan-XLVq0VzYD2Y@public.gmane.org>
The usdhc1 controller instance is used to provide the default
SD/MMC capabilities of the Colibri standard. The IO pins are
supplied to the SoC on the module whereas the SD-card is powered
by the Carrier Board supply.
Signed-off-by: Stefan Agner <stefan-XLVq0VzYD2Y@public.gmane.org>
---
arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi | 1 +
arch/arm/boot/dts/imx7-colibri.dtsi | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
index 5ecb3a858c5a..87c23b769a08 100644
--- a/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri-eval-v3.dtsi
@@ -158,5 +158,6 @@
&usdhc1 {
keep-power-in-suspend;
wakeup-source;
+ vmmc-supply = <®_3v3>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index 6498c1136ef1..d623ef0f6e3e 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -299,6 +299,7 @@
no-1-8-v;
cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
disable-wp;
+ vqmmc-supply = <®_LDO2>;
};
&iomuxc {
--
2.15.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-12-06 15:30 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-06 15:29 [PATCH 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator Stefan Agner
2017-12-06 15:29 ` [PATCH 2/9] ARM: dts: imx7-colibri: make sure multiplexed pins are not active Stefan Agner
[not found] ` <20171206153005.6144-2-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:01 ` Fabio Estevam
[not found] ` <CAOMZO5AD6bDEMStEWY8hRG_8gh0RAD_66zboTsKd-cFkPtiLKg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-17 20:02 ` Stefan Agner
2017-12-06 15:29 ` [PATCH 3/9] ARM: dts: imx7-colibri: mux pull-ups where appropriate Stefan Agner
[not found] ` <20171206153005.6144-3-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:02 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 4/9] ARM: dts: imx7-colibri: use NAND_CE1 as GPIO Stefan Agner
[not found] ` <20171206153005.6144-4-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:02 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 5/9] ARM: dts: imx7-colibri: specify cpu-supply Stefan Agner
[not found] ` <20171206153005.6144-5-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 13:59 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 7/9] ARM: dts: imx7-colibri: specify backlight GPIO Stefan Agner
[not found] ` <20171206153005.6144-7-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:03 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 8/9] ARM: dts: imx7-colibri: add MCP2515 CAN controller Stefan Agner
2017-12-07 8:59 ` Stefan Agner
[not found] ` <20171206153005.6144-8-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:05 ` Fabio Estevam
2017-12-06 15:30 ` [PATCH 9/9] ARM: dts: imx7: add Toradex Colibri iMX7D 1GB (eMMC) support Stefan Agner
[not found] ` <20171206153005.6144-9-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:09 ` Fabio Estevam
[not found] ` <CAOMZO5Dv5dRbbHeqMtitXaHjJbMF4nGQWg0dpyHu0hh+2TaxGA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-16 14:18 ` Philippe Ombredanne
[not found] ` <20171206153005.6144-1-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-06 15:30 ` Stefan Agner [this message]
[not found] ` <20171206153005.6144-6-stefan-XLVq0VzYD2Y@public.gmane.org>
2017-12-16 14:03 ` [PATCH 6/9] ARM: dts: imx7-colibri: specify usdhc1 supplies Fabio Estevam
2017-12-16 14:00 ` [PATCH 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171206153005.6144-6-stefan@agner.ch \
--to=stefan-xlvq0vzyd2y@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-3arQi8VN3Tc@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).