From: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
To: Stephen Boyd <sboyd@codeaurora.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>,
Will Deacon <will.deacon@arm.com>,
linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Arnd Bergmann <arnd@arndb.de>, Mark Brown <broonie@kernel.org>,
Xiaolong Zhang <xiaolong.zhang@spreadtrum.com>,
Ben Li <ben.li@spreadtrum.com>,
Orson Zhai <orson.zhai@spreadtrum.com>,
Chunyan Zhang <zhang.lyra@gmail.com>
Subject: [PATCH V7 07/12] clk: sprd: add adjustable pll support
Date: Thu, 7 Dec 2017 20:57:10 +0800 [thread overview]
Message-ID: <20171207125715.16160-8-chunyan.zhang@spreadtrum.com> (raw)
In-Reply-To: <20171207125715.16160-1-chunyan.zhang@spreadtrum.com>
Introduced a common adjustable pll clock driver for Spreadtrum SoCs.
Signed-off-by: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
---
drivers/clk/sprd/Makefile | 1 +
drivers/clk/sprd/pll.c | 266 ++++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/sprd/pll.h | 108 +++++++++++++++++++
3 files changed, 375 insertions(+)
create mode 100644 drivers/clk/sprd/pll.c
create mode 100644 drivers/clk/sprd/pll.h
diff --git a/drivers/clk/sprd/Makefile b/drivers/clk/sprd/Makefile
index 2262e76..d693969 100644
--- a/drivers/clk/sprd/Makefile
+++ b/drivers/clk/sprd/Makefile
@@ -5,3 +5,4 @@ clk-sprd-y += gate.o
clk-sprd-y += mux.o
clk-sprd-y += div.o
clk-sprd-y += composite.o
+clk-sprd-y += pll.o
diff --git a/drivers/clk/sprd/pll.c b/drivers/clk/sprd/pll.c
new file mode 100644
index 0000000..36b4402
--- /dev/null
+++ b/drivers/clk/sprd/pll.c
@@ -0,0 +1,266 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Spreadtrum pll clock driver
+//
+// Copyright (C) 2015~2017 Spreadtrum, Inc.
+// Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "pll.h"
+
+#define CLK_PLL_1M 1000000
+#define CLK_PLL_10M (CLK_PLL_1M * 10)
+
+#define pindex(pll, member) \
+ (pll->factors[member].shift / (8 * sizeof(pll->regs_num)))
+
+#define pshift(pll, member) \
+ (pll->factors[member].shift % (8 * sizeof(pll->regs_num)))
+
+#define pwidth(pll, member) \
+ pll->factors[member].width
+
+#define pmask(pll, member) \
+ ((pwidth(pll, member)) ? \
+ GENMASK(pwidth(pll, member) + pshift(pll, member) - 1, \
+ pshift(pll, member)) : 0)
+
+#define pinternal(pll, cfg, member) \
+ (cfg[pindex(pll, member)] & pmask(pll, member))
+
+#define pinternal_val(pll, cfg, member) \
+ (pinternal(pll, cfg, member) >> pshift(pll, member))
+
+static inline unsigned int
+sprd_pll_read(const struct sprd_pll *pll, u8 index)
+{
+ const struct sprd_clk_common *common = &pll->common;
+ unsigned int val = 0;
+
+ if (WARN_ON(index >= pll->regs_num))
+ return 0;
+
+ regmap_read(common->regmap, common->reg + index * 4, &val);
+
+ return val;
+}
+
+static inline void
+sprd_pll_write(const struct sprd_pll *pll, u8 index,
+ u32 msk, u32 val)
+{
+ const struct sprd_clk_common *common = &pll->common;
+ unsigned int offset, reg;
+ int ret = 0;
+
+ if (WARN_ON(index >= pll->regs_num))
+ return;
+
+ offset = common->reg + index * 4;
+ ret = regmap_read(common->regmap, offset, ®);
+ if (!ret)
+ regmap_write(common->regmap, offset, (reg & ~msk) | val);
+}
+
+static unsigned long pll_get_refin(const struct sprd_pll *pll)
+{
+ u32 shift, mask, index, refin_id = 3;
+ const unsigned long refin[4] = { 2, 4, 13, 26 };
+
+ if (pwidth(pll, PLL_REFIN)) {
+ index = pindex(pll, PLL_REFIN);
+ shift = pshift(pll, PLL_REFIN);
+ mask = pmask(pll, PLL_REFIN);
+ refin_id = (sprd_pll_read(pll, index) & mask) >> shift;
+ if (refin_id > 3)
+ refin_id = 3;
+ }
+
+ return refin[refin_id];
+}
+
+static u32 pll_get_ibias(u64 rate, const u64 *table)
+{
+ u32 i, num = table[0];
+
+ for (i = 1; i < num + 1; i++)
+ if (rate <= table[i])
+ break;
+
+ return (i == num + 1) ? num : i;
+}
+
+static unsigned long _sprd_pll_recalc_rate(const struct sprd_pll *pll,
+ unsigned long parent_rate)
+{
+ u32 *cfg;
+ u32 i, mask, regs_num = pll->regs_num;
+ unsigned long rate, nint, kint = 0;
+ u64 refin;
+ u16 k1, k2;
+
+ cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+
+ for (i = 0; i < regs_num; i++)
+ cfg[i] = sprd_pll_read(pll, i);
+
+ refin = pll_get_refin(pll);
+
+ if (pinternal(pll, cfg, PLL_PREDIV))
+ refin = refin * 2;
+
+ if (pwidth(pll, PLL_POSTDIV) &&
+ ((pll->fflag == 1 && pinternal(pll, cfg, PLL_POSTDIV)) ||
+ (!pll->fflag && !pinternal(pll, cfg, PLL_POSTDIV))))
+ refin = refin / 2;
+
+ if (!pinternal(pll, cfg, PLL_DIV_S)) {
+ rate = refin * pinternal_val(pll, cfg, PLL_N) * CLK_PLL_10M;
+ } else {
+ nint = pinternal_val(pll, cfg, PLL_NINT);
+ if (pinternal(pll, cfg, PLL_SDM_EN))
+ kint = pinternal_val(pll, cfg, PLL_KINT);
+
+ mask = pmask(pll, PLL_KINT);
+
+ k1 = pll->k1;
+ k2 = pll->k2;
+ rate = DIV_ROUND_CLOSEST_ULL(refin * kint * k1,
+ ((mask >> __ffs(mask)) + 1)) *
+ k2 + refin * nint * CLK_PLL_1M;
+ }
+
+ return rate;
+}
+
+#define SPRD_PLL_WRITE_CHECK(pll, i, mask, val) \
+ (((sprd_pll_read(pll, i) & mask) == val) ? 0 : (-EFAULT))
+
+static int _sprd_pll_set_rate(const struct sprd_pll *pll,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct reg_cfg *cfg;
+ int ret = 0;
+ u32 mask, shift, width, ibias_val, index;
+ u32 regs_num = pll->regs_num, i = 0;
+ unsigned long kint, nint;
+ u64 tmp, refin, fvco = rate;
+
+ cfg = kcalloc(regs_num, sizeof(*cfg), GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+
+ refin = pll_get_refin(pll);
+
+ mask = pmask(pll, PLL_PREDIV);
+ index = pindex(pll, PLL_PREDIV);
+ width = pwidth(pll, PLL_PREDIV);
+ if (width && (sprd_pll_read(pll, index) & mask))
+ refin = refin * 2;
+
+ mask = pmask(pll, PLL_POSTDIV);
+ index = pindex(pll, PLL_POSTDIV);
+ width = pwidth(pll, PLL_POSTDIV);
+ cfg[index].msk = mask;
+ if (width && ((pll->fflag == 1 && fvco <= pll->fvco) ||
+ (pll->fflag == 0 && fvco > pll->fvco)))
+ cfg[index].val |= mask;
+
+ if (width && fvco <= pll->fvco)
+ fvco = fvco * 2;
+
+ mask = pmask(pll, PLL_DIV_S);
+ index = pindex(pll, PLL_DIV_S);
+ cfg[index].val |= mask;
+ cfg[index].msk |= mask;
+
+ mask = pmask(pll, PLL_SDM_EN);
+ index = pindex(pll, PLL_SDM_EN);
+ cfg[index].val |= mask;
+ cfg[index].msk |= mask;
+
+ nint = do_div(fvco, refin * CLK_PLL_1M);
+ mask = pmask(pll, PLL_NINT);
+ index = pindex(pll, PLL_NINT);
+ shift = pshift(pll, PLL_NINT);
+ cfg[index].val |= (nint << shift) & mask;
+ cfg[index].msk |= mask;
+
+ mask = pmask(pll, PLL_KINT);
+ index = pindex(pll, PLL_KINT);
+ width = pwidth(pll, PLL_KINT);
+ shift = pshift(pll, PLL_KINT);
+ tmp = fvco - refin * nint * CLK_PLL_1M;
+ tmp = do_div(tmp, 10000) * ((mask >> shift) + 1);
+ kint = DIV_ROUND_CLOSEST_ULL(tmp, refin * 100);
+ cfg[index].val |= (kint << shift) & mask;
+ cfg[index].msk |= mask;
+
+ ibias_val = pll_get_ibias(fvco, pll->itable);
+
+ mask = pmask(pll, PLL_IBIAS);
+ index = pindex(pll, PLL_IBIAS);
+ shift = pshift(pll, PLL_IBIAS);
+ cfg[index].val |= ibias_val << shift & mask;
+ cfg[index].msk |= mask;
+
+ for (i = 0; i < regs_num; i++) {
+ if (cfg[i].msk) {
+ sprd_pll_write(pll, i, cfg[i].msk, cfg[i].val);
+ ret |= SPRD_PLL_WRITE_CHECK(pll, i, cfg[i].msk,
+ cfg[i].val);
+ }
+ }
+
+ if (!ret)
+ udelay(pll->udelay);
+
+ return ret;
+}
+
+static unsigned long sprd_pll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct sprd_pll *pll = hw_to_sprd_pll(hw);
+
+ return _sprd_pll_recalc_rate(pll, parent_rate);
+}
+
+static int sprd_pll_set_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct sprd_pll *pll = hw_to_sprd_pll(hw);
+
+ return _sprd_pll_set_rate(pll, rate, parent_rate);
+}
+
+static int sprd_pll_clk_prepare(struct clk_hw *hw)
+{
+ struct sprd_pll *pll = hw_to_sprd_pll(hw);
+
+ udelay(pll->udelay);
+
+ return 0;
+}
+
+static long sprd_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ return rate;
+}
+
+const struct clk_ops sprd_pll_ops = {
+ .prepare = sprd_pll_clk_prepare,
+ .recalc_rate = sprd_pll_recalc_rate,
+ .round_rate = sprd_pll_round_rate,
+ .set_rate = sprd_pll_set_rate,
+};
+EXPORT_SYMBOL_GPL(sprd_pll_ops);
diff --git a/drivers/clk/sprd/pll.h b/drivers/clk/sprd/pll.h
new file mode 100644
index 0000000..5141756
--- /dev/null
+++ b/drivers/clk/sprd/pll.h
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Spreadtrum pll clock driver
+//
+// Copyright (C) 2015~2017 Spreadtrum, Inc.
+// Author: Chunyan Zhang <chunyan.zhang@spreadtrum.com>
+
+#ifndef _SPRD_PLL_H_
+#define _SPRD_PLL_H_
+
+#include "common.h"
+
+struct reg_cfg {
+ u32 val;
+ u32 msk;
+};
+
+struct clk_bit_field {
+ u8 shift;
+ u8 width;
+};
+
+enum {
+ PLL_LOCK_DONE,
+ PLL_DIV_S,
+ PLL_MOD_EN,
+ PLL_SDM_EN,
+ PLL_REFIN,
+ PLL_IBIAS,
+ PLL_N,
+ PLL_NINT,
+ PLL_KINT,
+ PLL_PREDIV,
+ PLL_POSTDIV,
+
+ PLL_FACT_MAX
+};
+
+/*
+ * struct sprd_pll - definition of adjustable pll clock
+ *
+ * @reg: registers used to set the configuration of pll clock,
+ * reg[0] shows how many registers this pll clock uses.
+ * @itable: pll ibias table, itable[0] means how many items this
+ * table includes
+ * @udelay delay time after setting rate
+ * @factors used to calculate the pll clock rate
+ * @fvco: fvco threshold rate
+ * @fflag: fvco flag
+ */
+struct sprd_pll {
+ u32 regs_num;
+ const u64 *itable;
+ const struct clk_bit_field *factors;
+ u16 udelay;
+ u16 k1;
+ u16 k2;
+ u16 fflag;
+ u64 fvco;
+
+ struct sprd_clk_common common;
+};
+
+#define SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, \
+ _udelay, _k1, _k2, _fflag, _fvco) \
+ struct sprd_pll _struct = { \
+ .regs_num = _regs_num, \
+ .itable = _itable, \
+ .factors = _factors, \
+ .udelay = _udelay, \
+ .k1 = _k1, \
+ .k2 = _k2, \
+ .fflag = _fflag, \
+ .fvco = _fvco, \
+ .common = { \
+ .regmap = NULL, \
+ .reg = _reg, \
+ .hw.init = CLK_HW_INIT(_name, \
+ _parent, \
+ &sprd_pll_ops, \
+ 0), \
+ }, \
+ }
+
+#define SPRD_PLL_WITH_ITABLE_K(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, \
+ _udelay, _k1, _k2) \
+ SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, \
+ _udelay, _k1, _k2, 0, 0)
+
+#define SPRD_PLL_WITH_ITABLE_1K(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, _udelay) \
+ SPRD_PLL_WITH_ITABLE_K_FVCO(_struct, _name, _parent, _reg, \
+ _regs_num, _itable, _factors, \
+ _udelay, 1000, 1000, 0, 0)
+
+static inline struct sprd_pll *hw_to_sprd_pll(struct clk_hw *hw)
+{
+ struct sprd_clk_common *common = hw_to_sprd_clk_common(hw);
+
+ return container_of(common, struct sprd_pll, common);
+}
+
+extern const struct clk_ops sprd_pll_ops;
+
+#endif /* _SPRD_PLL_H_ */
--
2.7.4
next prev parent reply other threads:[~2017-12-07 12:57 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-07 12:57 [PATCH V7 00/12] add clock driver for Spreadtrum platforms Chunyan Zhang
2017-12-07 12:57 ` [PATCH V7 01/12] drivers: move clock common macros out from vendor directories Chunyan Zhang
[not found] ` <20171207125715.16160-2-chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
2017-12-21 23:02 ` Stephen Boyd
2017-12-07 12:57 ` [PATCH V7 02/12] clk: sprd: Add common infrastructure Chunyan Zhang
2017-12-07 13:25 ` Philippe Ombredanne
[not found] ` <20171207125715.16160-3-chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
2017-12-21 23:02 ` Stephen Boyd
2017-12-07 12:57 ` [PATCH V7 03/12] clk: sprd: add gate clock support Chunyan Zhang
2017-12-21 23:02 ` Stephen Boyd
2017-12-07 12:57 ` [PATCH V7 04/12] clk: sprd: add mux " Chunyan Zhang
2017-12-21 23:02 ` Stephen Boyd
2017-12-07 12:57 ` [PATCH V7 05/12] clk: sprd: add divider " Chunyan Zhang
2017-12-21 23:02 ` Stephen Boyd
2017-12-07 12:57 ` [PATCH V7 06/12] clk: sprd: add composite " Chunyan Zhang
2017-12-21 23:02 ` Stephen Boyd
2017-12-07 12:57 ` Chunyan Zhang [this message]
2017-12-21 23:02 ` [PATCH V7 07/12] clk: sprd: add adjustable pll support Stephen Boyd
2017-12-07 12:57 ` [PATCH V7 08/12] dt-bindings: Add Spreadtrum clock binding documentation Chunyan Zhang
[not found] ` <20171207125715.16160-9-chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
2017-12-21 23:02 ` Stephen Boyd
2017-12-07 12:57 ` [PATCH V7 09/12] clk: sprd: Add dt-bindings include file for SC9860 Chunyan Zhang
2017-12-21 23:02 ` Stephen Boyd
2017-12-07 12:57 ` [PATCH V7 10/12] clk: sprd: add clocks support " Chunyan Zhang
2017-12-21 23:03 ` Stephen Boyd
2017-12-07 12:57 ` [PATCH V7 11/12] arm64: dts: add syscon for whale2 platform Chunyan Zhang
[not found] ` <20171207125715.16160-12-chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
2017-12-21 23:03 ` Stephen Boyd
[not found] ` <20171221230316.GY7997-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2017-12-22 5:30 ` Chunyan Zhang
2018-01-04 16:51 ` Arnd Bergmann
2017-12-07 12:57 ` [PATCH V7 12/12] arm64: dts: add clocks for SC9860 Chunyan Zhang
2017-12-22 5:31 ` Chunyan Zhang
2018-01-04 21:34 ` Arnd Bergmann
2018-01-04 23:01 ` Arnd Bergmann
2018-01-05 5:27 ` Chunyan Zhang
2017-12-18 9:46 ` [PATCH V7 00/12] add clock driver for Spreadtrum platforms Chunyan Zhang
[not found] ` <20171207125715.16160-1-chunyan.zhang-lxIno14LUO0EEoCn2XhGlw@public.gmane.org>
2018-01-04 7:08 ` [RECEND PATCH V7 11/12] arm64: dts: add syscon for whale2 platform Chunyan Zhang
2018-01-04 7:08 ` [RECEND PATCH V7 12/12] arm64: dts: add clocks for SC9860 Chunyan Zhang
[not found] ` <1515049684-23481-2-git-send-email-zhang.chunyan-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2018-01-04 16:51 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171207125715.16160-8-chunyan.zhang@spreadtrum.com \
--to=chunyan.zhang@spreadtrum.com \
--cc=arnd@arndb.de \
--cc=ben.li@spreadtrum.com \
--cc=broonie@kernel.org \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=orson.zhai@spreadtrum.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
--cc=will.deacon@arm.com \
--cc=xiaolong.zhang@spreadtrum.com \
--cc=zhang.lyra@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).