From mboxrd@z Thu Jan 1 00:00:00 1970 From: Gregory CLEMENT Subject: [PATCH v2 7/7] arm64: dts: marvell: armada-37xx: add nodes allowing cpufreq support Date: Thu, 7 Dec 2017 14:56:16 +0100 Message-ID: <20171207135616.23670-8-gregory.clement@free-electrons.com> References: <20171207135616.23670-1-gregory.clement@free-electrons.com> Return-path: In-Reply-To: <20171207135616.23670-1-gregory.clement@free-electrons.com> Sender: linux-pm-owner@vger.kernel.org To: "Rafael J. Wysocki" , Viresh Kumar , linux-pm@vger.kernel.org Cc: Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Gregory CLEMENT , Rob Herring , devicetree@vger.kernel.org, Thomas Petazzoni , linux-arm-kernel@lists.infradead.org, Antoine Tenart , =?UTF-8?q?Miqu=C3=A8l=20Raynal?= , Nadav Haklai , Victor Gu , Marcin Wojtas , Wilson Ding , Hua Jing , Neta Zur Hershkovits , Evan Wang , Andre Heider List-Id: devicetree@vger.kernel.org In order to be able to use cpu freq, we need to associate a clock to each CPU and to expose the power management registers. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-372x.dtsi | 1 + arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-372x.dtsi b/arch/arm64/boot/dts/marvell/armada-372x.dtsi index 59d7557d3b1b..2554e0baea6b 100644 --- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi @@ -56,6 +56,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53","arm,armv8"; reg = <0x1>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 90c26d616a54..3056d7168e0b 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -65,6 +65,7 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0>; + clocks = <&nb_periph_clk 16>; enable-method = "psci"; }; }; @@ -234,6 +235,12 @@ }; }; + nb_pm: syscon@14000 { + compatible = "marvell,armada-3700-nb-pm", + "syscon"; + reg = <0x14000 0x60>; + }; + pinctrl_sb: pinctrl@18800 { compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd"; -- 2.15.0