From: Yixun Lan <yixun.lan@amlogic.com>
To: Neil Armstrong <narmstrong@baylibre.com>,
Jerome Brunet <jbrunet@baylibre.com>,
Kevin Hilman <khilman@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Carlo Caione <carlo@caione.org>,
Yixun Lan <yixun.lan@amlogic.com>,
Qiufang Dai <qiufang.dai@amlogic.com>,
Jian Hu <jian.hu@amlogic.com>,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 1/6] clk: meson: make the spinlock naming more specific
Date: Mon, 11 Dec 2017 22:13:43 +0800 [thread overview]
Message-ID: <20171211141348.22048-2-yixun.lan@amlogic.com> (raw)
In-Reply-To: <20171211141348.22048-1-yixun.lan@amlogic.com>
Make the spinlock more specific, so better for lockdep
debugging and ctags/grep.
Suggested-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
---
this patch try to address the issue which bring up by Stephen at [1]
[1] http://lists.infradead.org/pipermail/linux-amlogic/2017-December/005534.html
---
drivers/clk/meson/clkc.h | 2 +-
drivers/clk/meson/gxbb.c | 112 ++++++++++++++++++++++----------------------
drivers/clk/meson/meson8b.c | 24 +++++-----
3 files changed, 69 insertions(+), 69 deletions(-)
diff --git a/drivers/clk/meson/clkc.h b/drivers/clk/meson/clkc.h
index 1629da9b4141..c2ff0520ce53 100644
--- a/drivers/clk/meson/clkc.h
+++ b/drivers/clk/meson/clkc.h
@@ -134,7 +134,7 @@ struct meson_clk_audio_divider {
struct clk_gate _name = { \
.reg = (void __iomem *) _reg, \
.bit_idx = (_bit), \
- .lock = &clk_lock, \
+ .lock = &meson_clk_lock, \
.hw.init = &(struct clk_init_data) { \
.name = #_name, \
.ops = &clk_gate_ops, \
diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c
index ae385310e980..48936fbe7fd0 100644
--- a/drivers/clk/meson/gxbb.c
+++ b/drivers/clk/meson/gxbb.c
@@ -27,7 +27,7 @@
#include "clkc.h"
#include "gxbb.h"
-static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(meson_clk_lock);
static const struct pll_rate_table sys_pll_rate_table[] = {
PLL_RATE(24000000, 56, 1, 2),
@@ -294,7 +294,7 @@ static struct meson_clk_pll gxbb_fixed_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -330,7 +330,7 @@ static struct meson_clk_pll gxbb_hdmi_pll = {
.shift = 22,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "hdmi_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -358,7 +358,7 @@ static struct meson_clk_pll gxbb_sys_pll = {
},
.rate_table = sys_pll_rate_table,
.rate_count = ARRAY_SIZE(sys_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -399,7 +399,7 @@ static struct meson_clk_pll gxbb_gp0_pll = {
},
.rate_table = gxbb_gp0_pll_rate_table,
.rate_count = ARRAY_SIZE(gxbb_gp0_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -442,7 +442,7 @@ static struct meson_clk_pll gxl_gp0_pll = {
},
.rate_table = gxl_gp0_pll_rate_table,
.rate_count = ARRAY_SIZE(gxl_gp0_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &meson_clk_pll_ops,
@@ -533,7 +533,7 @@ static struct meson_clk_mpll gxbb_mpll0 = {
.shift = 25,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &meson_clk_mpll_ops,
@@ -563,7 +563,7 @@ static struct meson_clk_mpll gxbb_mpll1 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &meson_clk_mpll_ops,
@@ -593,7 +593,7 @@ static struct meson_clk_mpll gxbb_mpll2 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &meson_clk_mpll_ops,
@@ -620,7 +620,7 @@ static struct clk_mux gxbb_mpeg_clk_sel = {
.shift = 12,
.flags = CLK_MUX_READ_ONLY,
.table = mux_table_clk81,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
.ops = &clk_mux_ro_ops,
@@ -639,7 +639,7 @@ static struct clk_divider gxbb_mpeg_clk_div = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
.ops = &clk_divider_ops,
@@ -653,7 +653,7 @@ static struct clk_divider gxbb_mpeg_clk_div = {
static struct clk_gate gxbb_clk81 = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "clk81",
.ops = &clk_gate_ops,
@@ -667,7 +667,7 @@ static struct clk_mux gxbb_sar_adc_clk_sel = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.mask = 0x3,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_sel",
.ops = &clk_mux_ops,
@@ -681,7 +681,7 @@ static struct clk_divider gxbb_sar_adc_clk_div = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.shift = 0,
.width = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk_div",
.ops = &clk_divider_ops,
@@ -693,7 +693,7 @@ static struct clk_divider gxbb_sar_adc_clk_div = {
static struct clk_gate gxbb_sar_adc_clk = {
.reg = (void *)HHI_SAR_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sar_adc_clk",
.ops = &clk_gate_ops,
@@ -719,7 +719,7 @@ static struct clk_mux gxbb_mali_0_sel = {
.mask = 0x7,
.shift = 9,
.table = mux_table_mali_0_1,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_0_sel",
.ops = &clk_mux_ops,
@@ -738,7 +738,7 @@ static struct clk_divider gxbb_mali_0_div = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_0_div",
.ops = &clk_divider_ops,
@@ -751,7 +751,7 @@ static struct clk_divider gxbb_mali_0_div = {
static struct clk_gate gxbb_mali_0 = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_0",
.ops = &clk_gate_ops,
@@ -766,7 +766,7 @@ static struct clk_mux gxbb_mali_1_sel = {
.mask = 0x7,
.shift = 25,
.table = mux_table_mali_0_1,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_1_sel",
.ops = &clk_mux_ops,
@@ -785,7 +785,7 @@ static struct clk_divider gxbb_mali_1_div = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_1_div",
.ops = &clk_divider_ops,
@@ -798,7 +798,7 @@ static struct clk_divider gxbb_mali_1_div = {
static struct clk_gate gxbb_mali_1 = {
.reg = (void *)HHI_MALI_CLK_CNTL,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali_1",
.ops = &clk_gate_ops,
@@ -818,7 +818,7 @@ static struct clk_mux gxbb_mali = {
.mask = 1,
.shift = 31,
.table = mux_table_mali,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mali",
.ops = &clk_mux_ops,
@@ -834,7 +834,7 @@ static struct clk_mux gxbb_cts_amclk_sel = {
.shift = 9,
/* Default parent unknown (register reset value: 0) */
.table = (u32[]){ 1, 2, 3 },
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_amclk_sel",
.ops = &clk_mux_ops,
@@ -851,7 +851,7 @@ static struct meson_clk_audio_divider gxbb_cts_amclk_div = {
.width = 8,
},
.flags = CLK_DIVIDER_ROUND_CLOSEST,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_amclk_div",
.ops = &meson_clk_audio_divider_ops,
@@ -864,7 +864,7 @@ static struct meson_clk_audio_divider gxbb_cts_amclk_div = {
static struct clk_gate gxbb_cts_amclk = {
.reg = (void *) HHI_AUD_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_amclk",
.ops = &clk_gate_ops,
@@ -880,7 +880,7 @@ static struct clk_mux gxbb_cts_mclk_i958_sel = {
.shift = 25,
/* Default parent unknown (register reset value: 0) */
.table = (u32[]){ 1, 2, 3 },
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "cts_mclk_i958_sel",
.ops = &clk_mux_ops,
@@ -894,7 +894,7 @@ static struct clk_divider gxbb_cts_mclk_i958_div = {
.reg = (void *)HHI_AUD_CLK_CNTL2,
.shift = 16,
.width = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "cts_mclk_i958_div",
@@ -908,7 +908,7 @@ static struct clk_divider gxbb_cts_mclk_i958_div = {
static struct clk_gate gxbb_cts_mclk_i958 = {
.reg = (void *)HHI_AUD_CLK_CNTL2,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_mclk_i958",
.ops = &clk_gate_ops,
@@ -922,7 +922,7 @@ static struct clk_mux gxbb_cts_i958 = {
.reg = (void *)HHI_AUD_CLK_CNTL2,
.mask = 0x1,
.shift = 27,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "cts_i958",
.ops = &clk_mux_ops,
@@ -940,7 +940,7 @@ static struct clk_divider gxbb_32k_clk_div = {
.reg = (void *)HHI_32K_CLK_CNTL,
.shift = 0,
.width = 14,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "32k_clk_div",
.ops = &clk_divider_ops,
@@ -953,7 +953,7 @@ static struct clk_divider gxbb_32k_clk_div = {
static struct clk_gate gxbb_32k_clk = {
.reg = (void *)HHI_32K_CLK_CNTL,
.bit_idx = 15,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "32k_clk",
.ops = &clk_gate_ops,
@@ -971,7 +971,7 @@ static struct clk_mux gxbb_32k_clk_sel = {
.reg = (void *)HHI_32K_CLK_CNTL,
.mask = 0x3,
.shift = 16,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "32k_clk_sel",
.ops = &clk_mux_ops,
@@ -997,7 +997,7 @@ static struct clk_mux gxbb_sd_emmc_a_clk0_sel = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.mask = 0x7,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_a_clk0_sel",
.ops = &clk_mux_ops,
@@ -1011,7 +1011,7 @@ static struct clk_divider gxbb_sd_emmc_a_clk0_div = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_a_clk0_div",
@@ -1025,7 +1025,7 @@ static struct clk_divider gxbb_sd_emmc_a_clk0_div = {
static struct clk_gate gxbb_sd_emmc_a_clk0 = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_a_clk0",
.ops = &clk_gate_ops,
@@ -1050,7 +1050,7 @@ static struct clk_mux gxbb_sd_emmc_b_clk0_sel = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.mask = 0x7,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_sel",
.ops = &clk_mux_ops,
@@ -1064,7 +1064,7 @@ static struct clk_divider gxbb_sd_emmc_b_clk0_div = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_div",
@@ -1078,7 +1078,7 @@ static struct clk_divider gxbb_sd_emmc_b_clk0_div = {
static struct clk_gate gxbb_sd_emmc_b_clk0 = {
.reg = (void *)HHI_SD_EMMC_CLK_CNTL,
.bit_idx = 23,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_b_clk0",
.ops = &clk_gate_ops,
@@ -1093,7 +1093,7 @@ static struct clk_mux gxbb_sd_emmc_c_clk0_sel = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.mask = 0x7,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_sel",
.ops = &clk_mux_ops,
@@ -1107,7 +1107,7 @@ static struct clk_divider gxbb_sd_emmc_c_clk0_div = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_div",
@@ -1121,7 +1121,7 @@ static struct clk_divider gxbb_sd_emmc_c_clk0_div = {
static struct clk_gate gxbb_sd_emmc_c_clk0 = {
.reg = (void *)HHI_NAND_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_c_clk0",
.ops = &clk_gate_ops,
@@ -1142,7 +1142,7 @@ static struct clk_mux gxbb_vpu_0_sel = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.mask = 0x3,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vpu,
.hw.init = &(struct clk_init_data){
.name = "vpu_0_sel",
@@ -1161,7 +1161,7 @@ static struct clk_divider gxbb_vpu_0_div = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vpu_0_div",
.ops = &clk_divider_ops,
@@ -1174,7 +1174,7 @@ static struct clk_divider gxbb_vpu_0_div = {
static struct clk_gate gxbb_vpu_0 = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vpu_0",
.ops = &clk_gate_ops,
@@ -1188,7 +1188,7 @@ static struct clk_mux gxbb_vpu_1_sel = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.mask = 0x3,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vpu,
.hw.init = &(struct clk_init_data){
.name = "vpu_1_sel",
@@ -1207,7 +1207,7 @@ static struct clk_divider gxbb_vpu_1_div = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vpu_1_div",
.ops = &clk_divider_ops,
@@ -1220,7 +1220,7 @@ static struct clk_divider gxbb_vpu_1_div = {
static struct clk_gate gxbb_vpu_1 = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vpu_1",
.ops = &clk_gate_ops,
@@ -1234,7 +1234,7 @@ static struct clk_mux gxbb_vpu = {
.reg = (void *)HHI_VPU_CLK_CNTL,
.mask = 1,
.shift = 31,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vpu",
.ops = &clk_mux_ops,
@@ -1259,7 +1259,7 @@ static struct clk_mux gxbb_vapb_0_sel = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.mask = 0x3,
.shift = 9,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vapb,
.hw.init = &(struct clk_init_data){
.name = "vapb_0_sel",
@@ -1278,7 +1278,7 @@ static struct clk_divider gxbb_vapb_0_div = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vapb_0_div",
.ops = &clk_divider_ops,
@@ -1291,7 +1291,7 @@ static struct clk_divider gxbb_vapb_0_div = {
static struct clk_gate gxbb_vapb_0 = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.bit_idx = 8,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vapb_0",
.ops = &clk_gate_ops,
@@ -1305,7 +1305,7 @@ static struct clk_mux gxbb_vapb_1_sel = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.mask = 0x3,
.shift = 25,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.table = mux_table_vapb,
.hw.init = &(struct clk_init_data){
.name = "vapb_1_sel",
@@ -1324,7 +1324,7 @@ static struct clk_divider gxbb_vapb_1_div = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.shift = 16,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vapb_1_div",
.ops = &clk_divider_ops,
@@ -1337,7 +1337,7 @@ static struct clk_divider gxbb_vapb_1_div = {
static struct clk_gate gxbb_vapb_1 = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.bit_idx = 24,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vapb_1",
.ops = &clk_gate_ops,
@@ -1351,7 +1351,7 @@ static struct clk_mux gxbb_vapb_sel = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.mask = 1,
.shift = 31,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vapb_sel",
.ops = &clk_mux_ops,
@@ -1368,7 +1368,7 @@ static struct clk_mux gxbb_vapb_sel = {
static struct clk_gate gxbb_vapb = {
.reg = (void *)HHI_VAPBCLK_CNTL,
.bit_idx = 30,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data) {
.name = "vapb",
.ops = &clk_gate_ops,
diff --git a/drivers/clk/meson/meson8b.c b/drivers/clk/meson/meson8b.c
index 20ab7190d328..3ffea80c1308 100644
--- a/drivers/clk/meson/meson8b.c
+++ b/drivers/clk/meson/meson8b.c
@@ -32,7 +32,7 @@
#include "clkc.h"
#include "meson8b.h"
-static DEFINE_SPINLOCK(clk_lock);
+static DEFINE_SPINLOCK(meson_clk_lock);
static void __iomem *clk_base;
@@ -136,7 +136,7 @@ static struct meson_clk_pll meson8b_fixed_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -162,7 +162,7 @@ static struct meson_clk_pll meson8b_vid_pll = {
.shift = 16,
.width = 2,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "vid_pll",
.ops = &meson_clk_pll_ro_ops,
@@ -190,7 +190,7 @@ static struct meson_clk_pll meson8b_sys_pll = {
},
.rate_table = sys_pll_rate_table,
.rate_count = ARRAY_SIZE(sys_pll_rate_table),
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &meson_clk_pll_ops,
@@ -281,7 +281,7 @@ static struct meson_clk_mpll meson8b_mpll0 = {
.shift = 25,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &meson_clk_mpll_ops,
@@ -311,7 +311,7 @@ static struct meson_clk_mpll meson8b_mpll1 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &meson_clk_mpll_ops,
@@ -341,7 +341,7 @@ static struct meson_clk_mpll meson8b_mpll2 = {
.shift = 14,
.width = 1,
},
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &meson_clk_mpll_ops,
@@ -375,7 +375,7 @@ struct clk_mux meson8b_mpeg_clk_sel = {
.shift = 12,
.flags = CLK_MUX_READ_ONLY,
.table = mux_table_clk81,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
.ops = &clk_mux_ro_ops,
@@ -395,7 +395,7 @@ struct clk_divider meson8b_mpeg_clk_div = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
.ops = &clk_divider_ops,
@@ -408,7 +408,7 @@ struct clk_divider meson8b_mpeg_clk_div = {
struct clk_gate meson8b_clk81 = {
.reg = (void *)HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
- .lock = &clk_lock,
+ .lock = &meson_clk_lock,
.hw.init = &(struct clk_init_data){
.name = "clk81",
.ops = &clk_gate_ops,
@@ -773,7 +773,7 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
reset = &meson8b_clk_reset_bits[id];
- spin_lock_irqsave(&clk_lock, flags);
+ spin_lock_irqsave(&meson_clk_lock, flags);
val = readl(meson8b_clk_reset->base + reset->reg);
if (assert)
@@ -782,7 +782,7 @@ static int meson8b_clk_reset_update(struct reset_controller_dev *rcdev,
val &= ~BIT(reset->bit_idx);
writel(val, meson8b_clk_reset->base + reset->reg);
- spin_unlock_irqrestore(&clk_lock, flags);
+ spin_unlock_irqrestore(&meson_clk_lock, flags);
return 0;
}
--
2.15.1
next prev parent reply other threads:[~2017-12-11 14:13 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-11 14:13 [PATCH v7 0/6] add clk controller driver for Meson-AXG SoC Yixun Lan
2017-12-11 14:13 ` Yixun Lan [this message]
2017-12-14 9:57 ` [PATCH v7 1/6] clk: meson: make the spinlock naming more specific Jerome Brunet
2017-12-11 14:13 ` [PATCH v7 2/6] dt-bindings: clock: add compatible variant for the Meson-AXG Yixun Lan
2017-12-14 9:57 ` Jerome Brunet
2017-12-11 14:13 ` [PATCH v7 3/6] clk: meson-axg: add clocks dt-bindings required header Yixun Lan
2017-12-14 9:58 ` Jerome Brunet
2017-12-11 14:13 ` [PATCH v7 4/6] clk: meson-axg: add clock controller drivers Yixun Lan
2017-12-14 9:59 ` Jerome Brunet
2017-12-11 14:13 ` [PATCH v7 5/6] arm64: dts: meson-axg: add clock DT info for Meson AXG SoC Yixun Lan
2017-12-15 18:58 ` Kevin Hilman
2017-12-11 14:13 ` [PATCH v7 6/6] arm64: dts: meson-axg: switch uart_ao clock to CLK81 Yixun Lan
2017-12-14 16:47 ` Jerome Brunet
2017-12-15 1:49 ` Yixun Lan
2017-12-15 19:14 ` Kevin Hilman
2017-12-14 10:03 ` [PATCH v7 0/6] add clk controller driver for Meson-AXG SoC Jerome Brunet
2017-12-14 10:11 ` Yixun Lan
[not found] ` <1513245826.32163.7.camel-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
2017-12-15 20:00 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171211141348.22048-2-yixun.lan@amlogic.com \
--to=yixun.lan@amlogic.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=jian.hu@amlogic.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=narmstrong@baylibre.com \
--cc=qiufang.dai@amlogic.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).