From mboxrd@z Thu Jan  1 00:00:00 1970
From: David Miller <davem@davemloft.net>
Subject: Re: [PATCH net-next v5 0/4] net: fec: fix refclk enable for SMSC
 LAN8710/20
Date: Wed, 13 Dec 2017 11:23:10 -0500 (EST)
Message-ID: <20171213.112310.282538468543323693.davem@davemloft.net>
References: <20171211121700.10200-1-dev@g0hl1n.net>
Mime-Version: 1.0
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Return-path: <netdev-owner@vger.kernel.org>
In-Reply-To: <20171211121700.10200-1-dev@g0hl1n.net>
Sender: netdev-owner@vger.kernel.org
To: dev@g0hl1n.net
Cc: robh+dt@kernel.org, mark.rutland@arm.com, fugang.duan@nxp.com, andrew@lunn.ch, f.fainelli@gmail.com, frowand.list@gmail.com, geert+renesas@glider.be, sergei.shtylyov@cogentembedded.com, baruch@tkos.co.il, david.wu@rock-chips.com, lukma@denx.de, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, richard.leitner@skidata.com
List-Id: devicetree@vger.kernel.org

From: Richard Leitner <dev@g0hl1n.net>
Date: Mon, 11 Dec 2017 13:16:56 +0100

> From: Richard Leitner <richard.leitner@skidata.com>
> 
> This patch series fixes the use of the SMSC LAN8710/20 with a Freescale ETH
> when the refclk is generated by the FSL.
> 
> This patchset depends on the "phylib: Add device reset GPIO support" patch
> submitted by Geert Uytterhoeven/Sergei Shtylyov, which was merged to
> net-next as commit bafbdd527d56 ("phylib: Add device reset GPIO support").
> 
> Changes v5:
> 	- fix reset delay calculation (max_t instead of min_t)
> 
> Changes v4:
> 	- simplify dts parsing
> 	- simplify reset delay evaluation and execution
> 	- fec: ensure to only reset once during fec_enet_open()
> 	- remove dependency notes from commit message
> 	- add reviews and acks
> 
> Changes v3:
> 	- use phylib to hard-reset the PHY
> 	- implement reset delays in phylib
> 	- add new phylib API & flag (PHY_RST_AFTER_CLK_EN) to determine if
> 	  a PHY is affected
> 
> Changes v2:
> 	- simplify and fix fec_reset_phy function to support multiple calls
> 	- include: linux: phy: harmonize phy_id{,_mask} type
> 	- reset the phy instead of not turning the clock on and off
> 	  (which would have caused a power consumption regression)

Series applied, thanks.