From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tony Lindgren <tony@atomide.com>,
bcousson@baylibre.com, Santosh Shilimkar <ssantosh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, nsekhar@ti.com,
kishon@ti.com
Subject: [PATCH 05/14] ARM: dts: dra76-evm: Shift to using common IOdelay data
Date: Thu, 14 Dec 2017 19:10:45 +0530 [thread overview]
Message-ID: <20171214134054.7749-6-kishon@ti.com> (raw)
In-Reply-To: <20171214134054.7749-1-kishon@ti.com>
From: Sekhar Nori <nsekhar@ti.com>
Now that we have a device-tree include file with common
MMC/SD IOdelay data for DRA76x SoC, shift the EVM device-tree
file to using that.
Tested-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/dra76-evm.dts | 41 +----------------------------------------
1 file changed, 1 insertion(+), 40 deletions(-)
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index b024a65c6e27..2770f6d3e1cb 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -9,6 +9,7 @@
#include "dra76x.dtsi"
#include "dra7-evm-common.dtsi"
+#include "dra76x-mmc-iodelay.dtsi"
#include <dt-bindings/net/ti-dp83867.h>
/ {
@@ -100,46 +101,6 @@
};
};
-&dra7_pmx_core {
- mmc1_pins_default: mmc1_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
- >;
- };
-
- mmc1_pins_sdr12: pinmux_mmc1_sdr12_pins {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
- >;
- };
-
- mmc2_pins_default: mmc2_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
- >;
- };
-};
-
&i2c1 {
status = "okay";
clock-frequency = <400000>;
--
2.11.0
next prev parent reply other threads:[~2017-12-14 13:40 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-14 13:40 [PATCH 00/14] ARM: dra7/k2g: Use sdhci-omap for MMC/SD controller Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 01/14] ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 03/14] ARM: configs: keystone: " Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 04/14] ARM: dts: dra76x: Create a common file with MMC/SD IOdelay data Kishon Vijay Abraham I
2017-12-14 15:15 ` Tony Lindgren
[not found] ` <20171214151531.GI14441-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-12-15 6:09 ` Kishon Vijay Abraham I
2017-12-15 16:32 ` Tony Lindgren
2017-12-14 13:40 ` Kishon Vijay Abraham I [this message]
[not found] ` <20171214134054.7749-1-kishon-l0cyMroinI0@public.gmane.org>
2017-12-14 13:40 ` [PATCH 02/14] ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 06/14] ARM: dts: dra76-evm: Add pinctrl data for higher speed MMC/SD modes Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 08/14] ARM: dts: am57xx-idk: Add "vqmmc-supply" property for mmc2 Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 14/14] ARM: dts: keystone-k2g: Use sdhci-omap programming model Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 07/14] ARM: dts: am57xx-beagle-x15: Add "vqmmc-supply" property for mmc2 Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 09/14] ARM: dts: dra76-evm: " Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 10/14] ARM: dts: dra71-evm: Correct evm_sd regulator max voltage Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 11/14] ARM: dts: dra71-evm: Select pull down for mmc1_clk line in default mode Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 12/14] ARM: dts: am57xx-idk: " Kishon Vijay Abraham I
2017-12-14 13:40 ` [PATCH 13/14] ARM: dts: dra7: Use sdhci-omap programming model Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171214134054.7749-6-kishon@ti.com \
--to=kishon@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=ssantosh@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).