From: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>,
Andrew Jeffery <andrew-zrmu5oMJ5Fs@public.gmane.org>,
Patrick Venture <venture-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Xo Wang <xow-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Lei YU <mine260309-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "Cédric Le Goater" <clg-Bxea+6Xhats@public.gmane.org>,
"Benjamin Herrenschmidt"
<benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org>,
"Jeremy Kerr" <jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org
Subject: [PATCH v2 01/19] dt-bindings: clock: Add ASPEED constants
Date: Fri, 15 Dec 2017 16:54:25 +1030 [thread overview]
Message-ID: <20171215062443.23059-2-joel@jms.id.au> (raw)
In-Reply-To: <20171215062443.23059-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
These will be merged as part of the clock driver. This commit is
included so the tree will build without the clock series being applied.
Signed-off-by: Joel Stanley <joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
---
v2:
- remove NUM_CLKS define. There's no need for it to be part of ABI
---
include/dt-bindings/clock/aspeed-clock.h | 52 ++++++++++++++++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 include/dt-bindings/clock/aspeed-clock.h
diff --git a/include/dt-bindings/clock/aspeed-clock.h b/include/dt-bindings/clock/aspeed-clock.h
new file mode 100644
index 000000000000..d3558d897a4d
--- /dev/null
+++ b/include/dt-bindings/clock/aspeed-clock.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+#ifndef DT_BINDINGS_ASPEED_CLOCK_H
+#define DT_BINDINGS_ASPEED_CLOCK_H
+
+#define ASPEED_CLK_GATE_ECLK 0
+#define ASPEED_CLK_GATE_GCLK 1
+#define ASPEED_CLK_GATE_MCLK 2
+#define ASPEED_CLK_GATE_VCLK 3
+#define ASPEED_CLK_GATE_BCLK 4
+#define ASPEED_CLK_GATE_DCLK 5
+#define ASPEED_CLK_GATE_REFCLK 6
+#define ASPEED_CLK_GATE_USBPORT2CLK 7
+#define ASPEED_CLK_GATE_LCLK 8
+#define ASPEED_CLK_GATE_USBUHCICLK 9
+#define ASPEED_CLK_GATE_D1CLK 10
+#define ASPEED_CLK_GATE_YCLK 11
+#define ASPEED_CLK_GATE_USBPORT1CLK 12
+#define ASPEED_CLK_GATE_UART1CLK 13
+#define ASPEED_CLK_GATE_UART2CLK 14
+#define ASPEED_CLK_GATE_UART5CLK 15
+#define ASPEED_CLK_GATE_ESPICLK 16
+#define ASPEED_CLK_GATE_MAC1CLK 17
+#define ASPEED_CLK_GATE_MAC2CLK 18
+#define ASPEED_CLK_GATE_RSACLK 19
+#define ASPEED_CLK_GATE_UART3CLK 20
+#define ASPEED_CLK_GATE_UART4CLK 21
+#define ASPEED_CLK_GATE_SDCLKCLK 22
+#define ASPEED_CLK_GATE_LHCCLK 23
+#define ASPEED_CLK_HPLL 24
+#define ASPEED_CLK_AHB 25
+#define ASPEED_CLK_APB 26
+#define ASPEED_CLK_UART 27
+#define ASPEED_CLK_SDIO 28
+#define ASPEED_CLK_ECLK 29
+#define ASPEED_CLK_ECLK_MUX 30
+#define ASPEED_CLK_LHCLK 31
+#define ASPEED_CLK_MAC 32
+#define ASPEED_CLK_BCLK 33
+#define ASPEED_CLK_MPLL 34
+
+#define ASPEED_RESET_XDMA 0
+#define ASPEED_RESET_MCTP 1
+#define ASPEED_RESET_ADC 2
+#define ASPEED_RESET_JTAG_MASTER 3
+#define ASPEED_RESET_MIC 4
+#define ASPEED_RESET_PWM 5
+#define ASPEED_RESET_PCIVGA 6
+#define ASPEED_RESET_I2C 7
+#define ASPEED_RESET_AHB 8
+
+#endif
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2017-12-15 6:24 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 6:24 [PATCH v2 00/19] ARM: dts: aspeed: updates and new machines Joel Stanley
[not found] ` <20171215062443.23059-1-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-15 6:24 ` Joel Stanley [this message]
[not found] ` <20171215062443.23059-2-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-16 18:09 ` [PATCH v2 01/19] dt-bindings: clock: Add ASPEED constants Rob Herring
2017-12-15 6:24 ` [PATCH v2 06/19] ARM: dts: aspeed: Add watchdog clocks Joel Stanley
2017-12-18 9:02 ` Cédric Le Goater
2017-12-15 6:24 ` [PATCH v2 09/19] ARM: dts: aspeed: Add PWM and tachometer node Joel Stanley
2017-12-15 6:24 ` [PATCH v2 14/19] ARM: dts: aspeed: Sort ASPEED entries in makefile Joel Stanley
2017-12-18 9:06 ` Cédric Le Goater
2017-12-15 6:24 ` [PATCH v2 02/19] dt-bindings: gpio: Add ASPEED constants Joel Stanley
[not found] ` <20171215062443.23059-3-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-16 18:17 ` Rob Herring
2017-12-15 6:24 ` [PATCH v2 03/19] ARM: dts: aspeed: Add LPC and child devices Joel Stanley
2017-12-18 9:25 ` Cédric Le Goater
2017-12-20 3:21 ` Joel Stanley
2017-12-15 6:24 ` [PATCH v2 04/19] ARM: dts: aspeed: Add proper clock references Joel Stanley
2017-12-15 6:24 ` [PATCH v2 05/19] ARM: dts: aspeed: Add MAC clocks Joel Stanley
2017-12-15 6:24 ` [PATCH v2 07/19] ARM: dts: aspeed: Add flash controller clocks Joel Stanley
2017-12-18 9:03 ` Cédric Le Goater
2017-12-15 6:24 ` [PATCH v2 08/19] ARM: dts: aspeed: Add clock phandle to GPIO Joel Stanley
2017-12-15 6:24 ` [PATCH v2 10/19] ARM: dts: aspeed: Add LPC Snoop device Joel Stanley
[not found] ` <20171215062443.23059-11-joel-U3u1mxZcP9KHXe+LvDLADg@public.gmane.org>
2017-12-18 9:16 ` Cédric Le Goater
[not found] ` <c5ef27de-34c1-f5e9-e4ae-e2709b004677-Bxea+6Xhats@public.gmane.org>
2017-12-20 3:21 ` Joel Stanley
2017-12-15 6:24 ` [PATCH v2 11/19] ARM: dts: aspeed: Remove skeleton.dtsi Joel Stanley
2017-12-18 9:08 ` Cédric Le Goater
2017-12-15 6:24 ` [PATCH v2 12/19] ARM: dts: aspeed: Update license headers Joel Stanley
2017-12-18 9:05 ` Cédric Le Goater
2017-12-15 6:24 ` [PATCH v2 13/19] ARM: dts: Add OpenBMC flash layout Joel Stanley
2017-12-18 9:04 ` Cédric Le Goater
2017-12-15 6:24 ` [PATCH v2 15/19] ARM: dts: aspeed: Add Witherspoon BMC machine Joel Stanley
2017-12-15 6:24 ` [PATCH v2 16/19] ARM: dts: aspeed: Add Ingrasys Zaius " Joel Stanley
2017-12-15 6:24 ` [PATCH v2 17/19] ARM: dts: aspeed: Add Qanta Q71L " Joel Stanley
2017-12-15 6:24 ` [PATCH v2 18/19] ARM: dts: aspeed-romulus: Update Romulus system Joel Stanley
2017-12-18 9:32 ` Cédric Le Goater
[not found] ` <b8e80861-88c4-da87-a201-ca2eefaa5a94-Bxea+6Xhats@public.gmane.org>
2017-12-20 3:22 ` Joel Stanley
2017-12-15 6:24 ` [PATCH v2 19/19] ARM: dts: aspeed-plametto: Add flash layout Joel Stanley
2017-12-18 9:09 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171215062443.23059-2-joel@jms.id.au \
--to=joel-u3u1mxzcp9khxe+lvdladg@public.gmane.org \
--cc=andrew-zrmu5oMJ5Fs@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=benh-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public.gmane.org \
--cc=clg-Bxea+6Xhats@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jk-mnsaURCQ41sdnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-aspeed-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mine260309-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=venture-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=xow-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).