From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH] ARM: dts: am43xx: Fix inverted DS0_PULL_UP_DOWN_EN macro Date: Fri, 15 Dec 2017 08:44:08 -0800 Message-ID: <20171215164408.GG3875@atomide.com> References: <20171213212443.22632-1-d-gerlach@ti.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20171213212443.22632-1-d-gerlach-l0cyMroinI0@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Dave Gerlach Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org * Dave Gerlach [171213 13:27]: > Due to a mistake in documentation the DS0_PULL_UP_DOWN_EN macro was > mistakenly defined as an active high bit, however setting the bit > actually disables the internal pull resistor on the pin, so correct this > macro and introduce a new DS0_PULL_UP_DOWN_DIS macro with the proper bit > value set now that the documentation has been updated. > > Change based on AM437x Techninal Reference Manual SPRUHL7G Revised June > 2017 Section 7.2.1. Applying into omap-for-v4.16/dt thanks, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html