From mboxrd@z Thu Jan 1 00:00:00 1970 From: Miquel RAYNAL Subject: Re: [PATCH 00/12] Marvell NAND controller rework with ->exec_op() Date: Mon, 18 Dec 2017 09:25:35 +0100 Message-ID: <20171218092535.2ca1fe13@xps13> References: <20171207201814.30411-1-miquel.raynal@free-electrons.com> <20171214070930.0b885f6d@bbrezillon> <877etkecig.fsf@belgarion.home> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Return-path: In-Reply-To: <877etkecig.fsf-4ty26DBLk+jEm7gnYqmdkQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Robert Jarzmik Cc: Boris Brezillon , David Woodhouse , Brian Norris , Marek Vasut , Richard Weinberger , Cyrille Pitchen , Rob Herring , Mark Rutland , Jason Cooper , Andrew Lunn , Gregory Clement , Sebastian Hesselbarth , Russell King , Daniel Mack , Haojian Zhuang , Eric Miao , Catalin Marinas , Will Deacon Ezequiel Garcia List-Id: devicetree@vger.kernel.org Hello Robert, On Mon, 18 Dec 2017 08:11:35 +0100 Robert Jarzmik wrote: > Boris Brezillon writes: > > >> Robert, it would be great if you could also do more testing on PXA > >> and validate this driver. If needed, a branch ready to be tested is > >> available at [3]. It is based on nand/next and has all the changes > >> brought by the previously mentionned series as well as this one. > > > > Robert, do you think you'll have some time to test Miquel's branch > > on your PXA boards? Miquel already tested on one of these boards > > (CM-X300), but we'd like to have other testers. Also feel free to > > review the driver if have the time. > > > > Thanks, > > > > Boris > > Hi Boris and Miquel, > > I have applied the whole serie to linux-next yesterday. > > A boot attempt on my zylonite with my old defconfig (with the new > Marvell NAND config activated) yields to : > - this message > [ 3.136818] marvell-nfc pxa3xx-nand: could not identify the nand > chip [ 3.143874] marvell-nfc: probe of pxa3xx-nand failed with > error -22 > - then my board hangs > > Is there something to be done to improve the trace level so that you > can guess what's happening ? Thank you very much for testing this. Could you please try this branch [1] instead of linux-next + the patches? Also, can you please add #define DEBUG in marvell_nand.c + nand_base.c, it should help us figuring out what is wrong. Thank you, Miquèl [1] https://github.com/miquelraynal/linux/tree/marvell/nand-next/nfc -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html