From: Kishon Vijay Abraham I <kishon@ti.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org,
nsekhar@ti.com, kishon@ti.com
Subject: [PATCH v2 3/3] PCI: dra7xx: Enable x2 mode support for dra74x, dra76x and dra72x
Date: Tue, 19 Dec 2017 14:28:23 +0530 [thread overview]
Message-ID: <20171219085823.8695-4-kishon@ti.com> (raw)
In-Reply-To: <20171219085823.8695-1-kishon@ti.com>
dra74x/dra76x and dra72x has separate compatible strings. Add support
for these compatible strings in pci-dra7xx driver to perform syscon
configurations required to get x2 mode working.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/pci/dwc/pci-dra7xx.c | 90 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 90 insertions(+)
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index e77a4ceed74c..3b4427c10228 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -83,11 +83,15 @@
#define MSI_REQ_GRANT BIT(0)
#define MSI_VECTOR_SHIFT 7
+#define PCIE_1LANE_2LANE_SELECTION BIT(13)
+#define PCIE_B1C0_MODE_SEL BIT(2)
+
struct dra7xx_pcie {
struct dw_pcie *pci;
void __iomem *base; /* DT ti_conf */
int phy_count; /* DT phy-names count */
struct phy **phy;
+ u32 *b1c0_mask;
int link_gen;
struct irq_domain *irq_domain;
enum dw_pcie_device_mode mode;
@@ -95,6 +99,7 @@ struct dra7xx_pcie {
struct dra7xx_pcie_of_data {
enum dw_pcie_device_mode mode;
+ u32 b1co_mode_sel_mask;
};
#define to_dra7xx_pcie(x) dev_get_drvdata((x)->dev)
@@ -533,6 +538,26 @@ static const struct dra7xx_pcie_of_data dra7xx_pcie_ep_of_data = {
.mode = DW_PCIE_EP_TYPE,
};
+static const struct dra7xx_pcie_of_data dra746_pcie_rc_of_data = {
+ .b1co_mode_sel_mask = BIT(2),
+ .mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct dra7xx_pcie_of_data dra726_pcie_rc_of_data = {
+ .b1co_mode_sel_mask = GENMASK(3, 2),
+ .mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct dra7xx_pcie_of_data dra746_pcie_ep_of_data = {
+ .b1co_mode_sel_mask = BIT(2),
+ .mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct dra7xx_pcie_of_data dra726_pcie_ep_of_data = {
+ .b1co_mode_sel_mask = GENMASK(3, 2),
+ .mode = DW_PCIE_EP_TYPE,
+};
+
static const struct of_device_id of_dra7xx_pcie_match[] = {
{
.compatible = "ti,dra7-pcie",
@@ -542,6 +567,22 @@ static const struct of_device_id of_dra7xx_pcie_match[] = {
.compatible = "ti,dra7-pcie-ep",
.data = &dra7xx_pcie_ep_of_data,
},
+ {
+ .compatible = "ti,dra746-pcie-rc",
+ .data = &dra746_pcie_rc_of_data,
+ },
+ {
+ .compatible = "ti,dra726-pcie-rc",
+ .data = &dra726_pcie_rc_of_data,
+ },
+ {
+ .compatible = "ti,dra746-pcie-ep",
+ .data = &dra746_pcie_ep_of_data,
+ },
+ {
+ .compatible = "ti,dra726-pcie-ep",
+ .data = &dra726_pcie_ep_of_data,
+ },
{},
};
@@ -587,6 +628,47 @@ static int dra7xx_pcie_ep_unaligned_memaccess(struct device *dev)
return ret;
}
+static int dra7xx_pcie_configure_two_lane(struct device *dev,
+ u32 b1co_mode_sel_mask)
+{
+ struct device_node *np = dev->of_node;
+ struct regmap *pcie_syscon;
+ unsigned int pcie_reg;
+
+ pcie_syscon = syscon_regmap_lookup_by_phandle(np,
+ "ti,syscon-lane-conf");
+ if (IS_ERR(pcie_syscon)) {
+ dev_err(dev, "unable to get ti,syscon-lane-conf\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_index(np, "ti,syscon-lane-conf", 1,
+ &pcie_reg)) {
+ dev_err(dev, "couldn't get lane configuration reg offset\n");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(pcie_syscon, pcie_reg, PCIE_1LANE_2LANE_SELECTION,
+ PCIE_1LANE_2LANE_SELECTION);
+
+ pcie_syscon = syscon_regmap_lookup_by_phandle(np, "ti,syscon-lane-sel");
+ if (IS_ERR(pcie_syscon)) {
+ dev_err(dev, "unable to get ti,syscon-lane-sel\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32_index(np, "ti,syscon-lane-sel", 1,
+ &pcie_reg)) {
+ dev_err(dev, "couldn't get lane selection reg offset\n");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(pcie_syscon, pcie_reg, b1co_mode_sel_mask,
+ PCIE_B1C0_MODE_SEL);
+
+ return 0;
+}
+
static int __init dra7xx_pcie_probe(struct platform_device *pdev)
{
u32 reg;
@@ -608,6 +690,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
const struct of_device_id *match;
const struct dra7xx_pcie_of_data *data;
enum dw_pcie_device_mode mode;
+ u32 b1co_mode_sel_mask;
match = of_match_device(of_match_ptr(of_dra7xx_pcie_match), dev);
if (!match)
@@ -615,6 +698,7 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
data = (struct dra7xx_pcie_of_data *)match->data;
mode = (enum dw_pcie_device_mode)data->mode;
+ b1co_mode_sel_mask = data->b1co_mode_sel_mask;
dra7xx = devm_kzalloc(dev, sizeof(*dra7xx), GFP_KERNEL);
if (!dra7xx)
@@ -673,6 +757,12 @@ static int __init dra7xx_pcie_probe(struct platform_device *pdev)
dra7xx->pci = pci;
dra7xx->phy_count = phy_count;
+ if (phy_count == 2) {
+ ret = dra7xx_pcie_configure_two_lane(dev, b1co_mode_sel_mask);
+ if (ret < 0)
+ goto err_link;
+ }
+
ret = dra7xx_pcie_enable_phy(dra7xx);
if (ret) {
dev_err(dev, "failed to enable phy\n");
--
2.11.0
next prev parent reply other threads:[~2017-12-19 8:58 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 8:58 [PATCH v2 0/3] PCI: dra7xx: Support PCIe x2 lane mode Kishon Vijay Abraham I
2017-12-19 8:58 ` [PATCH v2 1/3] dt-bindings: PCI: dra7xx: Add SoC specific compatible strings Kishon Vijay Abraham I
2017-12-19 8:58 ` [PATCH v2 2/3] dt-bindings: PCI: dra7xx: Add properties to enable x2 lane in dra7 Kishon Vijay Abraham I
[not found] ` <20171219085823.8695-3-kishon-l0cyMroinI0@public.gmane.org>
2017-12-20 18:57 ` Rob Herring
2017-12-22 6:03 ` Kishon Vijay Abraham I
2017-12-22 18:24 ` Tony Lindgren
2017-12-26 17:46 ` Rob Herring
[not found] ` <CAL_Jsq+f3u0yvftvESKDiDF76bUiwr9hZED3ZZ75=qMMr6RL1g-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2017-12-26 18:10 ` Tony Lindgren
[not found] ` <20171226181009.GE3875-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2017-12-27 6:40 ` Kishon Vijay Abraham I
2017-12-19 8:58 ` Kishon Vijay Abraham I [this message]
2018-02-26 10:30 ` [PATCH v2 3/3] PCI: dra7xx: Enable x2 mode support for dra74x, dra76x and dra72x Lorenzo Pieralisi
2018-02-28 12:04 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219085823.8695-4-kishon@ti.com \
--to=kishon@ti.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).