From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andi Shyti Subject: Re: [PATCH v3 1/6] media: rc: update sunxi-ir driver to get base clock frequency from devicetree Date: Thu, 21 Dec 2017 11:16:39 +0900 Message-ID: <20171221021639.GG25647@gangnam.samsung> References: <20171219080747.4507-1-embed3d@gmail.com> <20171219080747.4507-2-embed3d@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Return-path: Content-disposition: inline In-reply-to: <20171219080747.4507-2-embed3d-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Philipp Rossak Cc: mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, wens-jdAy2FN1RRM@public.gmane.org, linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org, sean-hENCXIMQXOg@public.gmane.org, p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Id: devicetree@vger.kernel.org Hi Philipp, On Tue, Dec 19, 2017 at 09:07:42AM +0100, Philipp Rossak wrote: > This patch updates the sunxi-ir driver to set the base clock frequency from > devicetree. > > This is necessary since there are different ir receivers on the > market, that operate with different frequencies. So this value could be > set if the attached ir receiver needs a different base clock frequency, > than the default 8 MHz. > > Signed-off-by: Philipp Rossak feel free to add Reviewed-by: Andi Shyti Andi -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html