From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH v3 1/9] ARM: dts: imx7-colibri: move and rename USB Host power regulator Date: Thu, 21 Dec 2017 16:29:44 +0800 Message-ID: <20171221082943.GO23230@dragon> References: <20171219181038.1369-1-stefan@agner.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20171219181038.1369-1-stefan-XLVq0VzYD2Y@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Stefan Agner Cc: kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, fabio.estevam-3arQi8VN3Tc@public.gmane.org, robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org, mark.rutland-5wv7dgnIgG8@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Tue, Dec 19, 2017 at 07:10:30PM +0100, Stefan Agner wrote: > The Colibri default which enables USB Host power is not necessarily > tied to the OTG2 controller, some carrier board use the pin to > control USB power for both controllers. Hence name the pinctrl > group more generic. > > Also move the regulator to the generic eval-v3 device tree since > the regulator is always on the carrier board. In the Colibri iMX7S > case the regulator is just not used. This allows to reuse the > regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC. > > Signed-off-by: Stefan Agner > Reviewed-by: Fabio Estevam Applied all, thanks. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html