From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH 3/4] ARM: dts: vf610-zii-dev-rev-b: add PHYs for switch2 Date: Thu, 21 Dec 2017 10:01:47 +0100 Message-ID: <20171221090147.GB6683@lunn.ch> References: <20171220231108.GJ10595@n2100.armlinux.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Russell King Cc: Mark Rutland , Rob Herring , Sascha Hauer , Shawn Guo , Stefan Agner , Florian Fainelli , Linus Walleij , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org On Wed, Dec 20, 2017 at 11:11:55PM +0000, Russell King wrote: > Switch 2 has an 88e1545 PHY behind it, which is a quad PHY. Only the > first three PHYs are used, the remaining PHY is unused. When we wire > up the SFF sockets in a later commit, the omission of this causes the > fourth PHY to be used for port 3. Specifying the PHYs in DT avoids > the auto-probing of the bus, and discovery of this PHY. > > Signed-off-by: Russell King Reviewed-by: Andrew Lunn Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html