From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Lunn Subject: Re: [PATCH 4/4] ARM: dts: vf610-zii-dev-rev-b: add interrupts for 88e1545 PHY Date: Thu, 21 Dec 2017 10:06:26 +0100 Message-ID: <20171221090626.GC6683@lunn.ch> References: <20171220231108.GJ10595@n2100.armlinux.org.uk> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Russell King Cc: Mark Rutland , Rob Herring , Sascha Hauer , Shawn Guo , Stefan Agner , Florian Fainelli , Linus Walleij , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org On Wed, Dec 20, 2017 at 11:12:01PM +0000, Russell King wrote: > The 88e1545 PHY has its interrupts wired to the VF610, so we might as > well use them. > > Signed-off-by: Russell King > --- > This is certainly not correct, as all PHYs on this device share the > same interrupt line, but we can't specify the pinmux settings > individually on each PHY. How should this be handled? Hi Russell You could put it as a hog on the gpio controller node. However, i don't think that is much better. Reviewed-by: Andrew Lunn Andrew -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html