[PATCH 0/2] arm64: dts: r8a7795: r8a7796: add thermal cooling management

[PATCH 0/2] arm64: dts: r8a7795: r8a7796: add thermal cooling management

[Niklas Söderlund]

Hi,

This series adds support for for using CPUFreq as a cooling device for 
the A57 CUP:s on Renesas H3 and M3-W SoC:s. It depends on Simon Horman's 
topic/rcar-gen3-cpufreq branch [1] and is tested on-top the latest 
renesas-drivers on H3 and M3-W. For test results and test procedure 
please see:

   http://elinux.org/R-Car/Tests:rcar_gen3_thermal

Few notes on the specific values used in this series and why they might 
need to be changed.

- The trip point temperature of 95000 used is the most conservative one 
  from the BSP and maybe should be set at 110000 which is the most 
  aggressive one in the BSP.

- The cooling states described in all cooling-maps nodes might be 
  subject to change depending on the out-come of the ongoing review 
  process of Simon's work. It should use the highest possible cooling 
  state so if the number of states change due review of his work this 
  should be reflected in this series.

1.  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git

Niklas Söderlund (2):
  arm64: dts: r8a7795: add thermal cooling management
  arm64: dts: r8a7796: add thermal cooling management

 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 ++++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 38 ++++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+)

-- 
2.14.1

[PATCH 1/2] arm64: dts: r8a7795: add thermal cooling management

[Niklas Söderlund]

Add nodes and properties for thermal cooling management support.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
 arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 ++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 0ccac86bccc6b6f0..1818fd20660d0315 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
@@ -53,6 +53,7 @@
 				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
 				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
 				<&cluster0_opp_tb7>;
+			#cooling-cells = <2>;
 		};
 
 		a57_1: cpu@1 {
@@ -67,6 +68,7 @@
 				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
 				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
 				<&cluster0_opp_tb7>;
+			#cooling-cells = <2>;
 		};
 
 		a57_2: cpu@2 {
@@ -81,6 +83,7 @@
 				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
 				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
 				<&cluster0_opp_tb7>;
+			#cooling-cells = <2>;
 		};
 
 		a57_3: cpu@3 {
@@ -95,6 +98,7 @@
 				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
 				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
 				<&cluster0_opp_tb7>;
+			#cooling-cells = <2>;
 		};
 
 		a53_0: cpu@100 {
@@ -2821,12 +2825,24 @@
 				thermal-sensors = <&tsc 0>;
 
 				trips {
+					sensor1_passive: sensor1-passive {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
 					sensor1_crit: sensor1-crit {
 						temperature = <120000>;
 						hysteresis = <2000>;
 						type = "critical";
 					};
 				};
+
+				cooling-maps {
+					map0 {
+						trip = <&sensor1_passive>;
+						cooling-device = <&a57_0 4 4>;
+					};
+				};
 			};
 
 			sensor_thermal2: sensor-thermal2 {
@@ -2835,12 +2851,24 @@
 				thermal-sensors = <&tsc 1>;
 
 				trips {
+					sensor2_passive: sensor2-passive {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
 					sensor2_crit: sensor2-crit {
 						temperature = <120000>;
 						hysteresis = <2000>;
 						type = "critical";
 					};
 				};
+
+				cooling-maps {
+					map0 {
+						trip = <&sensor2_passive>;
+						cooling-device = <&a57_0 4 4>;
+					};
+				};
 			};
 
 			sensor_thermal3: sensor-thermal3 {
@@ -2849,12 +2877,24 @@
 				thermal-sensors = <&tsc 2>;
 
 				trips {
+					sensor3_passive: sensor3-passive {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
 					sensor3_crit: sensor3-crit {
 						temperature = <120000>;
 						hysteresis = <2000>;
 						type = "critical";
 					};
 				};
+
+				cooling-maps {
+					map0 {
+						trip = <&sensor3_passive>;
+						cooling-device = <&a57_0 4 4>;
+					};
+				};
 			};
 		};
 	};
-- 
2.14.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/2] arm64: dts: r8a7796: add thermal cooling management

[Niklas Söderlund]

Add nodes and properties for thermal cooling management support.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>
---
 arch/arm64/boot/dts/renesas/r8a7796.dtsi | 38 ++++++++++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
index 2905a3b953aab145..0b805dc30925e9be 100644
--- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
@@ -53,6 +53,7 @@
 				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
 				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
 				<&cluster0_opp_tb7>;
+			#cooling-cells = <2>;
 		};
 
 		a57_1: cpu@1 {
@@ -67,6 +68,7 @@
 				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
 				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
 				<&cluster0_opp_tb7>;
+			#cooling-cells = <2>;
 		};
 
 		a53_0: cpu@100 {
@@ -2116,12 +2118,24 @@
 				thermal-sensors = <&tsc 0>;
 
 				trips {
+					sensor1_passive: sensor1-passive {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
 					sensor1_crit: sensor1-crit {
 						temperature = <120000>;
 						hysteresis = <2000>;
 						type = "critical";
 					};
 				};
+
+				cooling-maps {
+					map0 {
+						trip = <&sensor1_passive>;
+						cooling-device = <&a57_0 5 5>;
+					};
+				};
 			};
 
 			sensor_thermal2: sensor-thermal2 {
@@ -2130,12 +2144,24 @@
 				thermal-sensors = <&tsc 1>;
 
 				trips {
+					sensor2_passive: sensor2-passive {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
 					sensor2_crit: sensor2-crit {
 						temperature = <120000>;
 						hysteresis = <2000>;
 						type = "critical";
 					};
 				};
+
+				cooling-maps {
+					map0 {
+						trip = <&sensor2_passive>;
+						cooling-device = <&a57_0 5 5>;
+					};
+				};
 			};
 
 			sensor_thermal3: sensor-thermal3 {
@@ -2144,12 +2170,24 @@
 				thermal-sensors = <&tsc 2>;
 
 				trips {
+					sensor3_passive: sensor3-passive {
+						temperature = <95000>;
+						hysteresis = <2000>;
+						type = "passive";
+					};
 					sensor3_crit: sensor3-crit {
 						temperature = <120000>;
 						hysteresis = <2000>;
 						type = "critical";
 					};
 				};
+
+				cooling-maps {
+					map0 {
+						trip = <&sensor3_passive>;
+						cooling-device = <&a57_0 5 5>;
+					};
+				};
 			};
 		};
 
-- 
2.14.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 0/2] arm64: dts: r8a7795: r8a7796: add thermal cooling management

[Simon Horman]

On Wed, Sep 13, 2017 at 12:59:07PM +0200, Niklas Söderlund wrote:
> Hi,
> 
> This series adds support for for using CPUFreq as a cooling device for 
> the A57 CUP:s on Renesas H3 and M3-W SoC:s. It depends on Simon Horman's 
> topic/rcar-gen3-cpufreq branch [1] and is tested on-top the latest 
> renesas-drivers on H3 and M3-W. For test results and test procedure 
> please see:
> 
>    http://elinux.org/R-Car/Tests:rcar_gen3_thermal

My cpufreq work needs revising to address review from both Geert and
yourself. I will try to address this in the near future. In the mean time
I have marked this series as Deferred.

> Few notes on the specific values used in this series and why they might 
> need to be changed.
> 
> - The trip point temperature of 95000 used is the most conservative one 
>   from the BSP and maybe should be set at 110000 which is the most 
>   aggressive one in the BSP.
> 
> - The cooling states described in all cooling-maps nodes might be 
>   subject to change depending on the out-come of the ongoing review 
>   process of Simon's work. It should use the highest possible cooling 
>   state so if the number of states change due review of his work this 
>   should be reflected in this series.
> 
> 1.  https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git
> 
> Niklas Söderlund (2):
>   arm64: dts: r8a7795: add thermal cooling management
>   arm64: dts: r8a7796: add thermal cooling management
> 
>  arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 ++++++++++++++++++++++++++++++++
>  arch/arm64/boot/dts/renesas/r8a7796.dtsi | 38 ++++++++++++++++++++++++++++++
>  2 files changed, 78 insertions(+)
> 
> -- 
> 2.14.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [2/2] arm64: dts: r8a7796: add thermal cooling management

[Eduardo Valentin]

On Wed, Sep 13, 2017 at 12:59:09PM +0200, Niklas Söderlund wrote:
> Add nodes and properties for thermal cooling management support.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

Acked-by: Eduardo Valentin <edubezval@gmail.com>

> ---
>  arch/arm64/boot/dts/renesas/r8a7796.dtsi | 38 ++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> index 2905a3b953aab145..0b805dc30925e9be 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi
> @@ -53,6 +53,7 @@
>  				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
>  				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
>  				<&cluster0_opp_tb7>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		a57_1: cpu@1 {
> @@ -67,6 +68,7 @@
>  				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
>  				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
>  				<&cluster0_opp_tb7>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		a53_0: cpu@100 {
> @@ -2116,12 +2118,24 @@
>  				thermal-sensors = <&tsc 0>;
>  
>  				trips {
> +					sensor1_passive: sensor1-passive {
> +						temperature = <95000>;
> +						hysteresis = <2000>;
> +						type = "passive";
> +					};
>  					sensor1_crit: sensor1-crit {
>  						temperature = <120000>;
>  						hysteresis = <2000>;
>  						type = "critical";
>  					};
>  				};
> +
> +				cooling-maps {
> +					map0 {
> +						trip = <&sensor1_passive>;
> +						cooling-device = <&a57_0 5 5>;
> +					};
> +				};
>  			};
>  
>  			sensor_thermal2: sensor-thermal2 {
> @@ -2130,12 +2144,24 @@
>  				thermal-sensors = <&tsc 1>;
>  
>  				trips {
> +					sensor2_passive: sensor2-passive {
> +						temperature = <95000>;
> +						hysteresis = <2000>;
> +						type = "passive";
> +					};
>  					sensor2_crit: sensor2-crit {
>  						temperature = <120000>;
>  						hysteresis = <2000>;
>  						type = "critical";
>  					};
>  				};
> +
> +				cooling-maps {
> +					map0 {
> +						trip = <&sensor2_passive>;
> +						cooling-device = <&a57_0 5 5>;
> +					};
> +				};
>  			};
>  
>  			sensor_thermal3: sensor-thermal3 {
> @@ -2144,12 +2170,24 @@
>  				thermal-sensors = <&tsc 2>;
>  
>  				trips {
> +					sensor3_passive: sensor3-passive {
> +						temperature = <95000>;
> +						hysteresis = <2000>;
> +						type = "passive";
> +					};
>  					sensor3_crit: sensor3-crit {
>  						temperature = <120000>;
>  						hysteresis = <2000>;
>  						type = "critical";
>  					};
>  				};
> +
> +				cooling-maps {
> +					map0 {
> +						trip = <&sensor3_passive>;
> +						cooling-device = <&a57_0 5 5>;
> +					};
> +				};
>  			};
>  		};
>  

Re: [1/2] arm64: dts: r8a7795: add thermal cooling management

[Eduardo Valentin]

On Wed, Sep 13, 2017 at 12:59:08PM +0200, Niklas Söderlund wrote:
> Add nodes and properties for thermal cooling management support.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas-1zkq55x86MTxsAP9Fp7wbw@public.gmane.org>

Acked-by: Eduardo Valentin <edubezval-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

> ---
>  arch/arm64/boot/dts/renesas/r8a7795.dtsi | 40 ++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> index 0ccac86bccc6b6f0..1818fd20660d0315 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
> @@ -53,6 +53,7 @@
>  				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
>  				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
>  				<&cluster0_opp_tb7>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		a57_1: cpu@1 {
> @@ -67,6 +68,7 @@
>  				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
>  				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
>  				<&cluster0_opp_tb7>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		a57_2: cpu@2 {
> @@ -81,6 +83,7 @@
>  				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
>  				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
>  				<&cluster0_opp_tb7>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		a57_3: cpu@3 {
> @@ -95,6 +98,7 @@
>  				<&cluster0_opp_tb3>, <&cluster0_opp_tb4>,
>  				<&cluster0_opp_tb5>, <&cluster0_opp_tb6>,
>  				<&cluster0_opp_tb7>;
> +			#cooling-cells = <2>;
>  		};
>  
>  		a53_0: cpu@100 {
> @@ -2821,12 +2825,24 @@
>  				thermal-sensors = <&tsc 0>;
>  
>  				trips {
> +					sensor1_passive: sensor1-passive {
> +						temperature = <95000>;
> +						hysteresis = <2000>;
> +						type = "passive";
> +					};
>  					sensor1_crit: sensor1-crit {
>  						temperature = <120000>;
>  						hysteresis = <2000>;
>  						type = "critical";
>  					};
>  				};
> +
> +				cooling-maps {
> +					map0 {
> +						trip = <&sensor1_passive>;
> +						cooling-device = <&a57_0 4 4>;
> +					};
> +				};
>  			};
>  
>  			sensor_thermal2: sensor-thermal2 {
> @@ -2835,12 +2851,24 @@
>  				thermal-sensors = <&tsc 1>;
>  
>  				trips {
> +					sensor2_passive: sensor2-passive {
> +						temperature = <95000>;
> +						hysteresis = <2000>;
> +						type = "passive";
> +					};
>  					sensor2_crit: sensor2-crit {
>  						temperature = <120000>;
>  						hysteresis = <2000>;
>  						type = "critical";
>  					};
>  				};
> +
> +				cooling-maps {
> +					map0 {
> +						trip = <&sensor2_passive>;
> +						cooling-device = <&a57_0 4 4>;
> +					};
> +				};
>  			};
>  
>  			sensor_thermal3: sensor-thermal3 {
> @@ -2849,12 +2877,24 @@
>  				thermal-sensors = <&tsc 2>;
>  
>  				trips {
> +					sensor3_passive: sensor3-passive {
> +						temperature = <95000>;
> +						hysteresis = <2000>;
> +						type = "passive";
> +					};
>  					sensor3_crit: sensor3-crit {
>  						temperature = <120000>;
>  						hysteresis = <2000>;
>  						type = "critical";
>  					};
>  				};
> +
> +				cooling-maps {
> +					map0 {
> +						trip = <&sensor3_passive>;
> +						cooling-device = <&a57_0 4 4>;
> +					};
> +				};
>  			};
>  		};
>  	};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [1/2] arm64: dts: r8a7795: add thermal cooling management

[Eduardo Valentin]

On Wed, Sep 13, 2017 at 12:59:08PM +0200, Niklas Söderlund wrote:
> Add nodes and properties for thermal cooling management support.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---

Just a reminder, this series should go via your arch tree. You may add
my acks.

Re: [1/2] arm64: dts: r8a7795: add thermal cooling management

[Simon Horman]

On Mon, Jan 01, 2018 at 10:13:35AM -0800, Eduardo Valentin wrote:
> On Wed, Sep 13, 2017 at 12:59:08PM +0200, Niklas Söderlund wrote:
> > Add nodes and properties for thermal cooling management support.
> > 
> > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > ---
> 
> Just a reminder, this series should go via your arch tree. You may add
> my acks.

Ack.

Niklas, could you comment on the readiness of these patches
for the renesas tree?

Re: [1/2] arm64: dts: r8a7795: add thermal cooling management

[Niklas Söderlund]

Hi Simon,

On 2018-01-02 10:19:44 +0100, Simon Horman wrote:
> On Mon, Jan 01, 2018 at 10:13:35AM -0800, Eduardo Valentin wrote:
> > On Wed, Sep 13, 2017 at 12:59:08PM +0200, Niklas Söderlund wrote:
> > > Add nodes and properties for thermal cooling management support.
> > > 
> > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > > ---
> > 
> > Just a reminder, this series should go via your arch tree. You may add
> > my acks.
> 
> Ack.
> 
> Niklas, could you comment on the readiness of these patches
> for the renesas tree?

I think maybe the patches might have became a bit outdated since they 
where posted due to all reg property fixup patches. The blocker for me 
reposting this series is that the patches this depends 
'topic/rcar-gen3-cpufreq' on are not yet in the renesas tree next or 
devel branches. Do you think it would be valuable for me to refresh 
these patches before the dependencies are picked up?

-- 
Regards,
Niklas Söderlund

Re: [1/2] arm64: dts: r8a7795: add thermal cooling management

[Simon Horman]

On Wed, Jan 03, 2018 at 01:03:52AM +0100, Niklas Söderlund wrote:
> Hi Simon,
> 
> On 2018-01-02 10:19:44 +0100, Simon Horman wrote:
> > On Mon, Jan 01, 2018 at 10:13:35AM -0800, Eduardo Valentin wrote:
> > > On Wed, Sep 13, 2017 at 12:59:08PM +0200, Niklas Söderlund wrote:
> > > > Add nodes and properties for thermal cooling management support.
> > > > 
> > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> > > > ---
> > > 
> > > Just a reminder, this series should go via your arch tree. You may add
> > > my acks.
> > 
> > Ack.
> > 
> > Niklas, could you comment on the readiness of these patches
> > for the renesas tree?
> 
> I think maybe the patches might have became a bit outdated since they 
> where posted due to all reg property fixup patches. The blocker for me 
> reposting this series is that the patches this depends 
> 'topic/rcar-gen3-cpufreq' on are not yet in the renesas tree next or 
> devel branches. Do you think it would be valuable for me to refresh 
> these patches before the dependencies are picked up?

Probably not. I'll try to work on getting cpufreq upstream :)

Re: [1/2] arm64: dts: r8a7795: add thermal cooling management

[Geert Uytterhoeven]

Hi Simon,

On Wed, Jan 3, 2018 at 11:14 AM, Simon Horman <horms@verge.net.au> wrote:
> On Wed, Jan 03, 2018 at 01:03:52AM +0100, Niklas Söderlund wrote:
>> On 2018-01-02 10:19:44 +0100, Simon Horman wrote:
>> > On Mon, Jan 01, 2018 at 10:13:35AM -0800, Eduardo Valentin wrote:
>> > > On Wed, Sep 13, 2017 at 12:59:08PM +0200, Niklas Söderlund wrote:
>> > > > Add nodes and properties for thermal cooling management support.
>> > > >
>> > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
>> > > > ---
>> > >
>> > > Just a reminder, this series should go via your arch tree. You may add
>> > > my acks.
>> >
>> > Ack.
>> >
>> > Niklas, could you comment on the readiness of these patches
>> > for the renesas tree?
>>
>> I think maybe the patches might have became a bit outdated since they
>> where posted due to all reg property fixup patches. The blocker for me
>> reposting this series is that the patches this depends
>> 'topic/rcar-gen3-cpufreq' on are not yet in the renesas tree next or
>> devel branches. Do you think it would be valuable for me to refresh
>> these patches before the dependencies are picked up?
>
> Probably not. I'll try to work on getting cpufreq upstream :)

I think it's working fine in renesas-drivers, isn't it?

As in the mean time the R-Car Gen3 CPG/MSSR drivers gained suspend/resume
support, the only missing part is support for restoring the Z* clocks during
system resume.  Unless that is handled automatically by the cpufreq core.
For secondary CPU cores, this may be handled by the CPU hotplug code.
For the primary CPU core, I don't know.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [1/2] arm64: dts: r8a7795: add thermal cooling management

[Simon Horman]

On Wed, Jan 03, 2018 at 11:25:37AM +0100, Geert Uytterhoeven wrote:
> Hi Simon,
> 
> On Wed, Jan 3, 2018 at 11:14 AM, Simon Horman <horms@verge.net.au> wrote:
> > On Wed, Jan 03, 2018 at 01:03:52AM +0100, Niklas Söderlund wrote:
> >> On 2018-01-02 10:19:44 +0100, Simon Horman wrote:
> >> > On Mon, Jan 01, 2018 at 10:13:35AM -0800, Eduardo Valentin wrote:
> >> > > On Wed, Sep 13, 2017 at 12:59:08PM +0200, Niklas Söderlund wrote:
> >> > > > Add nodes and properties for thermal cooling management support.
> >> > > >
> >> > > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> >> > > > ---
> >> > >
> >> > > Just a reminder, this series should go via your arch tree. You may add
> >> > > my acks.
> >> >
> >> > Ack.
> >> >
> >> > Niklas, could you comment on the readiness of these patches
> >> > for the renesas tree?
> >>
> >> I think maybe the patches might have became a bit outdated since they
> >> where posted due to all reg property fixup patches. The blocker for me
> >> reposting this series is that the patches this depends
> >> 'topic/rcar-gen3-cpufreq' on are not yet in the renesas tree next or
> >> devel branches. Do you think it would be valuable for me to refresh
> >> these patches before the dependencies are picked up?
> >
> > Probably not. I'll try to work on getting cpufreq upstream :)
> 
> I think it's working fine in renesas-drivers, isn't it?

There was some cleanup of the DTS patches pending.
That has now happened, been posted, reviewed and merged :)

> As in the mean time the R-Car Gen3 CPG/MSSR drivers gained suspend/resume
> support, the only missing part is support for restoring the Z* clocks during
> system resume.  Unless that is handled automatically by the cpufreq core.
> For secondary CPU cores, this may be handled by the CPU hotplug code.
> For the primary CPU core, I don't know.

Thanks, I'll look into that.