From: jacopo mondi <jacopo-AW8dsiIh9cEdnm+yROfE0A@public.gmane.org>
To: Shunqian Zheng <zhengsq-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
ddl-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
tfiga-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org
Subject: Re: [PATCH v2 1/4] media: ov5695: add support for OV5695 sensor
Date: Tue, 2 Jan 2018 11:09:38 +0100 [thread overview]
Message-ID: <20180102100938.GE4314@w540> (raw)
In-Reply-To: <1514534905-21393-1-git-send-email-zhengsq-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Hi Shunqian,
thank you for the patch
On Fri, Dec 29, 2017 at 04:08:22PM +0800, Shunqian Zheng wrote:
> This patch adds driver for Omnivision's ov5695 sensor,
> the driver supports following features:
> - supported resolutions
> + 2592x1944 at 30fps
> + 1920x1080 at 30fps
> + 1296x972 at 60fps
> + 1280x720 at 30fps
> + 640x480 at 120fps
> - test patterns
> - manual exposure/gain(analog and digital) control
> - vblank and hblank
> - media controller
> - runtime pm
>
> Signed-off-by: Shunqian Zheng <zhengsq-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
> ---
> drivers/media/i2c/Kconfig | 11 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/ov5695.c | 1396 ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1408 insertions(+)
> create mode 100644 drivers/media/i2c/ov5695.c
>
> diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
> index 3c6d642..55b37c8 100644
> --- a/drivers/media/i2c/Kconfig
> +++ b/drivers/media/i2c/Kconfig
> @@ -645,6 +645,17 @@ config VIDEO_OV5670
> To compile this driver as a module, choose M here: the
> module will be called ov5670.
>
> +config VIDEO_OV5695
> + tristate "OmniVision OV5695 sensor support"
> + depends on I2C && VIDEO_V4L2
> + depends on MEDIA_CAMERA_SUPPORT
> + ---help---
> + This is a Video4Linux2 sensor-level driver for the OmniVision
> + OV5695 camera.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called ov5695.
> +
> config VIDEO_OV7640
> tristate "OmniVision OV7640 sensor support"
> depends on I2C && VIDEO_V4L2
> diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
> index 548a9ef..a063030 100644
> --- a/drivers/media/i2c/Makefile
> +++ b/drivers/media/i2c/Makefile
> @@ -65,6 +65,7 @@ obj-$(CONFIG_VIDEO_OV5640) += ov5640.o
> obj-$(CONFIG_VIDEO_OV5645) += ov5645.o
> obj-$(CONFIG_VIDEO_OV5647) += ov5647.o
> obj-$(CONFIG_VIDEO_OV5670) += ov5670.o
> +obj-$(CONFIG_VIDEO_OV5695) += ov5695.o
> obj-$(CONFIG_VIDEO_OV6650) += ov6650.o
> obj-$(CONFIG_VIDEO_OV7640) += ov7640.o
> obj-$(CONFIG_VIDEO_OV7670) += ov7670.o
> diff --git a/drivers/media/i2c/ov5695.c b/drivers/media/i2c/ov5695.c
> new file mode 100644
> index 0000000..4745da4
> --- /dev/null
> +++ b/drivers/media/i2c/ov5695.c
> @@ -0,0 +1,1396 @@
> +/*
> + * ov5695 driver
> + *
> + * Copyright (C) 2017 Fuzhou Rockchip Electronics Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
Please use SPDX identifiers and drop the license text
> +
> +#include <linux/clk.h>
> +#include <linux/device.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/module.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/sysfs.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-async.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-subdev.h>
> +
> +#ifndef V4L2_CID_DIGITAL_GAIN
> +#define V4L2_CID_DIGITAL_GAIN V4L2_CID_GAIN
> +#endif
> +
> +/* 45Mhz * 4 Binning */
> +#define OV5695_PIXEL_RATE (45 * 1000 * 1000 * 4)
> +#define CHIP_ID 0x005695
> +#define OV5695_REG_CHIP_ID 0x300a
> +
> +#define OV5695_REG_CTRL_MODE 0x0100
> +#define OV5695_MODE_SW_STANDBY 0x0
> +#define OV5695_MODE_STREAMING BIT(0)
> +
> +#define OV5695_REG_EXPOSURE 0x3500
> +#define OV5695_EXPOSURE_MIN 4
> +#define OV5695_EXPOSURE_STEP 1
> +#define OV5695_VTS_MAX 0x7fff
> +
> +#define OV5695_REG_ANALOG_GAIN 0x3509
> +#define ANALOG_GAIN_MIN 0x10
> +#define ANALOG_GAIN_MAX 0xf8
> +#define ANALOG_GAIN_STEP 1
> +#define ANALOG_GAIN_DEFAULT 0xf8
> +
> +#define OV5695_REG_DIGI_GAIN_H 0x350a
> +#define OV5695_REG_DIGI_GAIN_L 0x350b
> +#define OV5695_DIGI_GAIN_L_MASK 0x3f
> +#define OV5695_DIGI_GAIN_H_SHIFT 6
> +#define OV5695_DIGI_GAIN_MIN 0
> +#define OV5695_DIGI_GAIN_MAX (0x4000 - 1)
> +#define OV5695_DIGI_GAIN_STEP 1
> +#define OV5695_DIGI_GAIN_DEFAULT 1024
> +
> +#define OV5695_REG_TEST_PATTERN 0x4503
> +#define OV5695_TEST_PATTERN_ENABLE 0x80
> +#define OV5695_TEST_PATTERN_DISABLE 0x0
> +
> +#define OV5695_REG_VTS 0x380e
> +
> +#define REG_NULL 0xFFFF
> +
> +#define OV5695_REG_VALUE_08BIT 1
> +#define OV5695_REG_VALUE_16BIT 2
> +#define OV5695_REG_VALUE_24BIT 3
> +
> +#define OV5695_LANES 2
> +#define OV5695_BITS_PER_SAMPLE 10
> +
> +struct regval {
> + u16 addr;
> + u8 val;
> +};
> +
> +struct ov5695_mode {
> + u32 width;
> + u32 height;
> + u32 max_fps;
> + u32 hts_def;
> + u32 vts_def;
> + u32 exp_def;
> + const struct regval *reg_list;
> +};
> +
> +struct ov5695 {
> + struct i2c_client *client;
> + struct clk *xvclk;
> + struct regulator *avdd_regulator;
> + struct regulator *dovdd_regulator;
> + struct regulator *dvdd_regulator;
> + struct gpio_desc *reset_gpio;
> +
> + struct v4l2_subdev subdev;
> + struct media_pad pad;
> + struct v4l2_ctrl_handler ctrl_handler;
> + struct v4l2_ctrl *exposure;
> + struct v4l2_ctrl *anal_gain;
> + struct v4l2_ctrl *digi_gain;
> + struct v4l2_ctrl *hblank;
> + struct v4l2_ctrl *vblank;
> + struct v4l2_ctrl *test_pattern;
> + struct mutex mutex;
> + bool streaming;
> + const struct ov5695_mode *cur_mode;
> +};
> +#define to_ov5695(sd) container_of(sd, struct ov5695, subdev)
> +
> +/*
> + * Xclk 24Mhz
> + * Pclk 45Mhz
> + * linelength 672(0x2a0)
> + * framelength 2232(0x8b8)
> + * grabwindow_width 1296
> + * grabwindow_height 972
> + * max_framerate 30fps
> + * mipi_datarate per lane 840Mbps
> + */
> +static const struct regval ov5695_global_regs[] = {
> + {0x0103, 0x01},
> + {0x0100, 0x00},
> + {0x0300, 0x04},
> + {0x0301, 0x00},
> + {0x0302, 0x69},
> + {0x0303, 0x00},
> + {0x0304, 0x00},
> + {0x0305, 0x01},
> + {0x0307, 0x00},
> + {0x030b, 0x00},
> + {0x030c, 0x00},
> + {0x030d, 0x1e},
> + {0x030e, 0x04},
> + {0x030f, 0x03},
> + {0x0312, 0x01},
> + {0x3000, 0x00},
> + {0x3002, 0xa1},
> + {0x0308, 0x00},
> + {0x0310, 0x00},
> + {0x3022, 0x51},
> + {0x3106, 0x15},
> + {0x3107, 0x01},
> + {0x3108, 0x05},
> + {0x3500, 0x00},
> + {0x3501, 0x45},
> + {0x3502, 0x00},
> + {0x3503, 0x08},
> + {0x3504, 0x03},
> + {0x3505, 0x8c},
> + {0x3507, 0x03},
> + {0x3508, 0x00},
> + {0x3509, 0x10},
> + {0x350c, 0x00},
> + {0x350d, 0x80},
> + {0x3510, 0x00},
> + {0x3511, 0x02},
> + {0x3512, 0x00},
> + {0x3601, 0x55},
> + {0x3602, 0x58},
> + {0x3614, 0x30},
> + {0x3615, 0x77},
> + {0x3621, 0x08},
> + {0x3624, 0x40},
> + {0x3633, 0x0c},
> + {0x3634, 0x0c},
> + {0x3635, 0x0c},
> + {0x3636, 0x0c},
> + {0x3638, 0x00},
> + {0x3639, 0x00},
> + {0x363a, 0x00},
> + {0x363b, 0x00},
> + {0x363c, 0xff},
> + {0x363d, 0xfa},
> + {0x3650, 0x44},
> + {0x3651, 0x44},
> + {0x3652, 0x44},
> + {0x3653, 0x44},
> + {0x3654, 0x44},
> + {0x3655, 0x44},
> + {0x3656, 0x44},
> + {0x3657, 0x44},
> + {0x3660, 0x00},
> + {0x3661, 0x00},
> + {0x3662, 0x00},
> + {0x366a, 0x00},
> + {0x366e, 0x0c},
> + {0x3673, 0x04},
> + {0x3700, 0x14},
> + {0x3703, 0x0c},
> + {0x3715, 0x01},
> + {0x3733, 0x10},
> + {0x3734, 0x40},
> + {0x373f, 0xa0},
> + {0x3765, 0x20},
> + {0x37a1, 0x1d},
> + {0x37a8, 0x26},
> + {0x37ab, 0x14},
> + {0x37c2, 0x04},
> + {0x37cb, 0x09},
> + {0x37cc, 0x13},
> + {0x37cd, 0x1f},
> + {0x37ce, 0x1f},
> + {0x3800, 0x00},
> + {0x3801, 0x00},
> + {0x3802, 0x00},
> + {0x3803, 0x00},
> + {0x3804, 0x0a},
> + {0x3805, 0x3f},
> + {0x3806, 0x07},
> + {0x3807, 0xaf},
> + {0x3808, 0x05},
> + {0x3809, 0x10},
> + {0x380a, 0x03},
> + {0x380b, 0xcc},
> + {0x380c, 0x02},
> + {0x380d, 0xa0},
> + {0x380e, 0x08},
> + {0x380f, 0xb8},
> + {0x3810, 0x00},
> + {0x3811, 0x06},
> + {0x3812, 0x00},
> + {0x3813, 0x06},
> + {0x3814, 0x03},
> + {0x3815, 0x01},
> + {0x3816, 0x03},
> + {0x3817, 0x01},
> + {0x3818, 0x00},
> + {0x3819, 0x00},
> + {0x381a, 0x00},
> + {0x381b, 0x01},
> + {0x3820, 0x8b},
> + {0x3821, 0x01},
> + {0x3c80, 0x08},
> + {0x3c82, 0x00},
> + {0x3c83, 0x00},
> + {0x3c88, 0x00},
> + {0x3d85, 0x14},
> + {0x3f02, 0x08},
> + {0x3f03, 0x10},
> + {0x4008, 0x02},
> + {0x4009, 0x09},
> + {0x404e, 0x20},
> + {0x4501, 0x00},
> + {0x4502, 0x10},
> + {0x4800, 0x00},
> + {0x481f, 0x2a},
> + {0x4837, 0x13},
> + {0x5000, 0x17},
> + {0x5780, 0x3e},
> + {0x5781, 0x0f},
> + {0x5782, 0x44},
> + {0x5783, 0x02},
> + {0x5784, 0x01},
> + {0x5785, 0x01},
> + {0x5786, 0x00},
> + {0x5787, 0x04},
> + {0x5788, 0x02},
> + {0x5789, 0x0f},
> + {0x578a, 0xfd},
> + {0x578b, 0xf5},
> + {0x578c, 0xf5},
> + {0x578d, 0x03},
> + {0x578e, 0x08},
> + {0x578f, 0x0c},
> + {0x5790, 0x08},
> + {0x5791, 0x06},
> + {0x5792, 0x00},
> + {0x5793, 0x52},
> + {0x5794, 0xa3},
> + {0x5b00, 0x00},
> + {0x5b01, 0x1c},
> + {0x5b02, 0x00},
> + {0x5b03, 0x7f},
> + {0x5b05, 0x6c},
> + {0x5e10, 0xfc},
> + {0x4010, 0xf1},
> + {0x3503, 0x08},
> + {0x3505, 0x8c},
> + {0x3507, 0x03},
> + {0x3508, 0x00},
> + {0x3509, 0xf8},
> + {REG_NULL, 0x00},
> +};
> +
> +/*
> + * Xclk 24Mhz
> + * Pclk 45Mhz
> + * linelength 740(0x2e4)
> + * framelength 2024(0x7e8)
> + * grabwindow_width 2592
> + * grabwindow_height 1944
> + * max_framerate 30fps
> + * mipi_datarate per lane 840Mbps
> + */
> +static const struct regval ov5695_2592x1944_regs[] = {
> + {0x3501, 0x7e},
> + {0x366e, 0x18},
> + {0x3800, 0x00},
> + {0x3801, 0x00},
> + {0x3802, 0x00},
> + {0x3803, 0x04},
> + {0x3804, 0x0a},
> + {0x3805, 0x3f},
> + {0x3806, 0x07},
> + {0x3807, 0xab},
> + {0x3808, 0x0a},
> + {0x3809, 0x20},
> + {0x380a, 0x07},
> + {0x380b, 0x98},
> + {0x380c, 0x02},
> + {0x380d, 0xe4},
> + {0x380e, 0x07},
> + {0x380f, 0xe8},
> + {0x3811, 0x06},
> + {0x3813, 0x08},
> + {0x3814, 0x01},
> + {0x3816, 0x01},
> + {0x3817, 0x01},
> + {0x3820, 0x88},
> + {0x3821, 0x00},
> + {0x4501, 0x00},
> + {0x4008, 0x04},
> + {0x4009, 0x13},
> + {REG_NULL, 0x00},
> +};
> +
> +/*
> + * Xclk 24Mhz
> + * Pclk 45Mhz
> + * linelength 672(0x2a0)
> + * framelength 2232(0x8b8)
> + * grabwindow_width 1920
> + * grabwindow_height 1080
> + * max_framerate 30fps
> + * mipi_datarate per lane 840Mbps
> + */
> +static const struct regval ov5695_1920x1080_regs[] = {
> + {0x3501, 0x45},
> + {0x366e, 0x18},
> + {0x3800, 0x01},
> + {0x3801, 0x50},
> + {0x3802, 0x01},
> + {0x3803, 0xb8},
> + {0x3804, 0x08},
> + {0x3805, 0xef},
> + {0x3806, 0x05},
> + {0x3807, 0xf7},
> + {0x3808, 0x07},
> + {0x3809, 0x80},
> + {0x380a, 0x04},
> + {0x380b, 0x38},
> + {0x380c, 0x02},
> + {0x380d, 0xa0},
> + {0x380e, 0x08},
> + {0x380f, 0xb8},
> + {0x3811, 0x06},
> + {0x3813, 0x04},
> + {0x3814, 0x01},
> + {0x3816, 0x01},
> + {0x3817, 0x01},
> + {0x3820, 0x88},
> + {0x3821, 0x00},
> + {0x4501, 0x00},
> + {0x4008, 0x04},
> + {0x4009, 0x13},
> + {REG_NULL, 0x00}
> +};
> +
> +/*
> + * Xclk 24Mhz
> + * Pclk 45Mhz
> + * linelength 740(0x02e4)
> + * framelength 1012(0x03f4)
> + * grabwindow_width 1296
> + * grabwindow_height 972
> + * max_framerate 60fps
> + * mipi_datarate per lane 840Mbps
> + */
> +static const struct regval ov5695_1296x972_regs[] = {
> + {0x0103, 0x01},
> + {0x0100, 0x00},
> + {0x0300, 0x04},
> + {0x0301, 0x00},
> + {0x0302, 0x69},
> + {0x0303, 0x00},
> + {0x0304, 0x00},
> + {0x0305, 0x01},
> + {0x0307, 0x00},
> + {0x030b, 0x00},
> + {0x030c, 0x00},
> + {0x030d, 0x1e},
> + {0x030e, 0x04},
> + {0x030f, 0x03},
> + {0x0312, 0x01},
> + {0x3000, 0x00},
> + {0x3002, 0x21},
> + {0x3016, 0x32},
> + {0x3022, 0x51},
> + {0x3106, 0x15},
> + {0x3107, 0x01},
> + {0x3108, 0x05},
> + {0x3500, 0x00},
> + {0x3501, 0x3e},
> + {0x3502, 0x00},
> + {0x3503, 0x08},
> + {0x3504, 0x03},
> + {0x3505, 0x8c},
> + {0x3507, 0x03},
> + {0x3508, 0x00},
> + {0x3509, 0x10},
> + {0x350c, 0x00},
> + {0x350d, 0x80},
> + {0x3510, 0x00},
> + {0x3511, 0x02},
> + {0x3512, 0x00},
> + {0x3601, 0x55},
> + {0x3602, 0x58},
> + {0x3611, 0x58},
> + {0x3614, 0x30},
> + {0x3615, 0x77},
> + {0x3621, 0x08},
> + {0x3624, 0x40},
> + {0x3633, 0x0c},
> + {0x3634, 0x0c},
> + {0x3635, 0x0c},
> + {0x3636, 0x0c},
> + {0x3638, 0x00},
> + {0x3639, 0x00},
> + {0x363a, 0x00},
> + {0x363b, 0x00},
> + {0x363c, 0xff},
> + {0x363d, 0xfa},
> + {0x3650, 0x44},
> + {0x3651, 0x44},
> + {0x3652, 0x44},
> + {0x3653, 0x44},
> + {0x3654, 0x44},
> + {0x3655, 0x44},
> + {0x3656, 0x44},
> + {0x3657, 0x44},
> + {0x3660, 0x00},
> + {0x3661, 0x00},
> + {0x3662, 0x00},
> + {0x366a, 0x00},
> + {0x366e, 0x0c},
> + {0x3673, 0x04},
> + {0x3700, 0x14},
> + {0x3703, 0x0c},
> + {0x3706, 0x24},
> + {0x3714, 0x27},
> + {0x3715, 0x01},
> + {0x3716, 0x00},
> + {0x3717, 0x02},
> + {0x3733, 0x10},
> + {0x3734, 0x40},
> + {0x373f, 0xa0},
> + {0x3765, 0x20},
> + {0x37a1, 0x1d},
> + {0x37a8, 0x26},
> + {0x37ab, 0x14},
> + {0x37c2, 0x04},
> + {0x37c3, 0xf0},
> + {0x37cb, 0x09},
> + {0x37cc, 0x13},
> + {0x37cd, 0x1f},
> + {0x37ce, 0x1f},
> + {0x3800, 0x00},
> + {0x3801, 0x00},
> + {0x3802, 0x00},
> + {0x3803, 0x00},
> + {0x3804, 0x0a},
> + {0x3805, 0x3f},
> + {0x3806, 0x07},
> + {0x3807, 0xaf},
> + {0x3808, 0x05},
> + {0x3809, 0x10},
> + {0x380a, 0x03},
> + {0x380b, 0xcc},
> + {0x380c, 0x02},
> + {0x380d, 0xe4},
> + {0x380e, 0x03},
> + {0x380f, 0xf4},
> + {0x3810, 0x00},
> + {0x3811, 0x00},
> + {0x3812, 0x00},
> + {0x3813, 0x06},
> + {0x3814, 0x03},
> + {0x3815, 0x01},
> + {0x3816, 0x03},
> + {0x3817, 0x01},
> + {0x3818, 0x00},
> + {0x3819, 0x00},
> + {0x381a, 0x00},
> + {0x381b, 0x01},
> + {0x3820, 0x8b},
> + {0x3821, 0x01},
> + {0x3c80, 0x08},
> + {0x3c82, 0x00},
> + {0x3c83, 0x00},
> + {0x3c88, 0x00},
> + {0x3d85, 0x14},
> + {0x3f02, 0x08},
> + {0x3f03, 0x10},
> + {0x4008, 0x02},
> + {0x4009, 0x09},
> + {0x404e, 0x20},
> + {0x4501, 0x00},
> + {0x4502, 0x10},
> + {0x4800, 0x00},
> + {0x481f, 0x2a},
> + {0x4837, 0x13},
> + {0x5000, 0x13},
> + {0x5780, 0x3e},
> + {0x5781, 0x0f},
> + {0x5782, 0x44},
> + {0x5783, 0x02},
> + {0x5784, 0x01},
> + {0x5785, 0x01},
> + {0x5786, 0x00},
> + {0x5787, 0x04},
> + {0x5788, 0x02},
> + {0x5789, 0x0f},
> + {0x578a, 0xfd},
> + {0x578b, 0xf5},
> + {0x578c, 0xf5},
> + {0x578d, 0x03},
> + {0x578e, 0x08},
> + {0x578f, 0x0c},
> + {0x5790, 0x08},
> + {0x5791, 0x06},
> + {0x5792, 0x00},
> + {0x5793, 0x52},
> + {0x5794, 0xa3},
> + {0x5b00, 0x00},
> + {0x5b01, 0x1c},
> + {0x5b02, 0x00},
> + {0x5b03, 0x7f},
> + {0x5b05, 0x6c},
> + {0x5e10, 0xfc},
> + {0x4010, 0xf1},
> + {0x3503, 0x08},
> + {0x3505, 0x8c},
> + {0x3507, 0x03},
> + {0x3508, 0x00},
> + {0x3509, 0xf8},
> + {0x0100, 0x01},
> + {REG_NULL, 0x00}
> +};
> +
> +/*
> + * Xclk 24Mhz
> + * Pclk 45Mhz
> + * linelength 672(0x2a0)
> + * framelength 2232(0x8b8)
> + * grabwindow_width 1280
> + * grabwindow_height 720
> + * max_framerate 30fps
> + * mipi_datarate per lane 840Mbps
> + */
> +static const struct regval ov5695_1280x720_regs[] = {
> + {0x3501, 0x45},
> + {0x366e, 0x0c},
> + {0x3800, 0x00},
> + {0x3801, 0x00},
> + {0x3802, 0x01},
> + {0x3803, 0x00},
> + {0x3804, 0x0a},
> + {0x3805, 0x3f},
> + {0x3806, 0x06},
> + {0x3807, 0xaf},
> + {0x3808, 0x05},
> + {0x3809, 0x00},
> + {0x380a, 0x02},
> + {0x380b, 0xd0},
> + {0x380c, 0x02},
> + {0x380d, 0xa0},
> + {0x380e, 0x08},
> + {0x380f, 0xb8},
> + {0x3811, 0x06},
> + {0x3813, 0x02},
> + {0x3814, 0x03},
> + {0x3816, 0x03},
> + {0x3817, 0x01},
> + {0x3820, 0x8b},
> + {0x3821, 0x01},
> + {0x4501, 0x00},
> + {0x4008, 0x02},
> + {0x4009, 0x09},
> + {REG_NULL, 0x00}
> +};
> +
> +/*
> + * Xclk 24Mhz
> + * Pclk 45Mhz
> + * linelength 672(0x2a0)
> + * framelength 558(0x22e)
> + * grabwindow_width 640
> + * grabwindow_height 480
> + * max_framerate 120fps
> + * mipi_datarate per lane 840Mbps
> + */
> +static const struct regval ov5695_640x480_regs[] = {
> + {0x3501, 0x22},
> + {0x366e, 0x0c},
> + {0x3800, 0x00},
> + {0x3801, 0x00},
> + {0x3802, 0x00},
> + {0x3803, 0x08},
> + {0x3804, 0x0a},
> + {0x3805, 0x3f},
> + {0x3806, 0x07},
> + {0x3807, 0xa7},
> + {0x3808, 0x02},
> + {0x3809, 0x80},
> + {0x380a, 0x01},
> + {0x380b, 0xe0},
> + {0x380c, 0x02},
> + {0x380d, 0xa0},
> + {0x380e, 0x02},
> + {0x380f, 0x2e},
> + {0x3811, 0x06},
> + {0x3813, 0x04},
> + {0x3814, 0x07},
> + {0x3816, 0x05},
> + {0x3817, 0x03},
> + {0x3820, 0x8d},
> + {0x3821, 0x01},
> + {0x4501, 0x00},
> + {0x4008, 0x02},
> + {0x4009, 0x09},
> + {REG_NULL, 0x00}
> +};
> +
> +static const struct ov5695_mode supported_modes[] = {
> + {
> + .width = 2592,
> + .height = 1944,
> + .max_fps = 30,
> + .exp_def = 0x0450,
> + .hts_def = 0x02e4 * 4,
> + .vts_def = 0x07e8,
> + .reg_list = ov5695_2592x1944_regs,
> + },
> + {
> + .width = 1920,
> + .height = 1080,
> + .max_fps = 30,
> + .exp_def = 0x0450,
> + .hts_def = 0x02a0 * 4,
> + .vts_def = 0x08b8,
> + .reg_list = ov5695_1920x1080_regs,
> + },
> + {
> + .width = 1296,
> + .height = 972,
> + .max_fps = 60,
> + .exp_def = 0x03e0,
> + .hts_def = 0x02e4 * 4,
> + .vts_def = 0x03f4,
> + .reg_list = ov5695_1296x972_regs,
> + },
> + {
> + .width = 1280,
> + .height = 720,
> + .max_fps = 30,
> + .exp_def = 0x0450,
> + .hts_def = 0x02a0 * 4,
> + .vts_def = 0x08b8,
> + .reg_list = ov5695_1280x720_regs,
> + },
> + {
> + .width = 640,
> + .height = 480,
> + .max_fps = 120,
> + .exp_def = 0x0450,
> + .hts_def = 0x02a0 * 4,
> + .vts_def = 0x022e,
> + .reg_list = ov5695_640x480_regs,
> + },
> +};
> +
> +#define OV5695_LINK_FREQ_420MHZ 420000000
> +static const s64 link_freq_menu_items[] = {
> + OV5695_LINK_FREQ_420MHZ
> +};
> +
> +static const char * const ov5695_test_pattern_menu[] = {
> + "Disabled",
> + "Vertical Color Bar Type 1",
> + "Vertical Color Bar Type 2",
> + "Vertical Color Bar Type 3",
> + "Vertical Color Bar Type 4"
> +};
> +
> +/* Write registers up to 4 at a time */
> +static int ov5695_write_reg(struct i2c_client *client, u16 reg,
> + unsigned int len, u32 val)
> +{
> + int buf_i;
> + int val_i;
> + u8 buf[6];
> + u8 *val_p;
> + __be32 val_be;
> +
> + if (len > 4)
> + return -EINVAL;
> +
> + buf[0] = reg >> 8;
> + buf[1] = reg & 0xff;
> +
> + val_be = cpu_to_be32(val);
> + val_p = (u8 *)&val_be;
> + buf_i = 2;
> + val_i = 4 - len;
> +
> + while (val_i < 4)
> + buf[buf_i++] = val_p[val_i++];
> +
> + if (i2c_master_send(client, buf, len + 2) != len + 2)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int ov5695_write_array(struct i2c_client *client,
> + const struct regval *regs)
> +{
> + int i, ret = 0;
> +
> + for (i = 0; ret == 0 && regs[i].addr != REG_NULL; i++)
> + ret = ov5695_write_reg(client, regs[i].addr,
> + OV5695_REG_VALUE_08BIT, regs[i].val);
> +
> + return ret;
> +}
> +
> +/* Read registers up to 4 at a time */
> +static int ov5695_read_reg(struct i2c_client *client, u16 reg, unsigned int len,
> + u32 *val)
> +{
> + struct i2c_msg msgs[2];
> + u8 *data_be_p;
> + __be32 data_be = 0;
> + __be16 reg_addr_be = cpu_to_be16(reg);
> + int ret;
> +
> + if (len > 4)
> + return -EINVAL;
> +
> + data_be_p = (u8 *)&data_be;
> + /* Write register address */
> + msgs[0].addr = client->addr;
> + msgs[0].flags = 0;
> + msgs[0].len = 2;
> + msgs[0].buf = (u8 *)®_addr_be;
> +
> + /* Read data from register */
> + msgs[1].addr = client->addr;
> + msgs[1].flags = I2C_M_RD;
> + msgs[1].len = len;
> + msgs[1].buf = &data_be_p[4 - len];
> +
> + ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
> + if (ret != ARRAY_SIZE(msgs))
> + return -EIO;
> +
> + *val = be32_to_cpu(data_be);
> +
> + return 0;
> +}
> +
> +static int ov5695_get_reso_dist(const struct ov5695_mode *mode,
> + struct v4l2_mbus_framefmt *framefmt)
> +{
> + return abs(mode->width - framefmt->width) +
> + abs(mode->height - framefmt->height);
> +}
> +
> +static const struct ov5695_mode *ov5695_find_best_fit(
> + struct v4l2_subdev_format *fmt)
> +{
> + struct v4l2_mbus_framefmt *framefmt = &fmt->format;
> + int dist;
> + int cur_best_fit = 0;
> + int cur_best_fit_dist = -1;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(supported_modes); i++) {
> + dist = ov5695_get_reso_dist(&supported_modes[i], framefmt);
> + if (cur_best_fit_dist == -1 || dist < cur_best_fit_dist) {
> + cur_best_fit_dist = dist;
> + cur_best_fit = i;
> + }
> + }
> +
> + return &supported_modes[cur_best_fit];
> +}
> +
> +static int ov5695_set_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct ov5695 *ov5695 = to_ov5695(sd);
> + const struct ov5695_mode *mode;
> + s64 h_blank, vblank_def;
> +
> + mutex_lock(&ov5695->mutex);
> +
> + mode = ov5695_find_best_fit(fmt);
> + fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
> + fmt->format.width = mode->width;
> + fmt->format.height = mode->height;
> + fmt->format.field = V4L2_FIELD_NONE;
> + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> + *v4l2_subdev_get_try_format(sd, cfg, fmt->pad) = fmt->format;
> +#else
> + mutex_unlock(&ov5695->mutex);
> + return -ENOTTY;
> +#endif
> + } else {
> + ov5695->cur_mode = mode;
> + h_blank = mode->hts_def - mode->width;
> + __v4l2_ctrl_modify_range(ov5695->hblank, h_blank,
> + h_blank, 1, h_blank);
> + vblank_def = mode->vts_def - mode->height;
> + __v4l2_ctrl_modify_range(ov5695->vblank, vblank_def,
> + OV5695_VTS_MAX - mode->height,
> + 1, vblank_def);
> + }
> +
> + mutex_unlock(&ov5695->mutex);
> + return 0;
> +}
> +
> +static int ov5695_get_fmt(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_format *fmt)
> +{
> + struct ov5695 *ov5695 = to_ov5695(sd);
> + const struct ov5695_mode *mode = ov5695->cur_mode;
> +
> + mutex_lock(&ov5695->mutex);
> + if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> + fmt->format = *v4l2_subdev_get_try_format(sd, cfg, fmt->pad);
> +#else
> + mutex_unlock(&ov5695->mutex);
> + return -ENOTTY;
> +#endif
> + } else {
> + fmt->format.width = mode->width;
> + fmt->format.height = mode->height;
> + fmt->format.code = MEDIA_BUS_FMT_SBGGR10_1X10;
> + fmt->format.field = V4L2_FIELD_NONE;
> + }
> + mutex_unlock(&ov5695->mutex);
> + return 0;
> +}
> +
> +static int ov5695_enum_mbus_code(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_mbus_code_enum *code)
> +{
> + if (code->index != 0)
> + return -EINVAL;
> + code->code = MEDIA_BUS_FMT_SBGGR10_1X10;
> +
> + return 0;
> +}
> +
> +static int ov5695_enum_frame_sizes(struct v4l2_subdev *sd,
> + struct v4l2_subdev_pad_config *cfg,
> + struct v4l2_subdev_frame_size_enum *fse)
> +{
> + if (fse->index > ARRAY_SIZE(supported_modes))
> + return -EINVAL;
> +
> + if (fse->code != MEDIA_BUS_FMT_SBGGR10_1X10)
> + return -EINVAL;
> +
> + fse->min_width = supported_modes[fse->index].width;
> + fse->max_width = supported_modes[fse->index].width;
> + fse->max_height = supported_modes[fse->index].height;
> + fse->min_height = supported_modes[fse->index].height;
> +
> + return 0;
> +}
> +
> +static int ov5695_enable_test_pattern(struct ov5695 *ov5695, u32 pattern)
> +{
> + u32 val;
> +
> + if (pattern)
> + val = (pattern - 1) | OV5695_TEST_PATTERN_ENABLE;
> + else
> + val = OV5695_TEST_PATTERN_DISABLE;
> +
> + return ov5695_write_reg(ov5695->client, OV5695_REG_TEST_PATTERN,
> + OV5695_REG_VALUE_08BIT, val);
> +}
> +
> +static void ov5695_set_exposure(struct ov5695 *ov5695, s32 val)
> +{
> + /* 4 least significant bits of expsoure are fractional part */
> + ov5695_write_reg(ov5695->client, OV5695_REG_EXPOSURE,
> + OV5695_REG_VALUE_24BIT, val << 4);
> +}
> +
> +static void ov5695_set_analog_gain(struct ov5695 *ov5695, s32 val)
> +{
> + ov5695_write_reg(ov5695->client, OV5695_REG_ANALOG_GAIN,
> + OV5695_REG_VALUE_08BIT, val);
> +}
> +
> +static void ov5695_set_digi_gain(struct ov5695 *ov5695, s32 val)
> +{
> + ov5695_write_reg(ov5695->client, OV5695_REG_DIGI_GAIN_L,
> + OV5695_REG_VALUE_08BIT, val & OV5695_DIGI_GAIN_L_MASK);
> + val >>= OV5695_DIGI_GAIN_H_SHIFT;
> + ov5695_write_reg(ov5695->client, OV5695_REG_DIGI_GAIN_H,
> + OV5695_REG_VALUE_08BIT, val);
> +}
> +
> +static void ov5695_set_vts(struct ov5695 *ov5695, s32 val)
> +{
> + val += ov5695->cur_mode->height;
> +
> + ov5695_write_reg(ov5695->client, OV5695_REG_VTS,
> + OV5695_REG_VALUE_16BIT, val);
> +}
> +
> +static int __ov5695_start_stream(struct ov5695 *ov5695)
> +{
> + int ret;
> +
> + ret = ov5695_write_array(ov5695->client, ov5695_global_regs);
> + if (ret)
> + return ret;
> + ret = ov5695_write_array(ov5695->client, ov5695->cur_mode->reg_list);
> + if (ret)
> + return ret;
> +
> + /* In case these controls are set before streaming */
> + ov5695_set_exposure(ov5695, ov5695->exposure->val);
> + ov5695_set_analog_gain(ov5695, ov5695->anal_gain->val);
> + ov5695_set_digi_gain(ov5695, ov5695->digi_gain->val);
> + ov5695_set_vts(ov5695, ov5695->vblank->val);
> + ov5695_enable_test_pattern(ov5695, ov5695->test_pattern->val);
> +
> + ret = ov5695_write_reg(ov5695->client, OV5695_REG_CTRL_MODE,
> + OV5695_REG_VALUE_08BIT, OV5695_MODE_STREAMING);
> + return ret;
> +}
> +
> +static int __ov5695_stop_stream(struct ov5695 *ov5695)
> +{
> + return ov5695_write_reg(ov5695->client, OV5695_REG_CTRL_MODE,
> + OV5695_REG_VALUE_08BIT, OV5695_MODE_SW_STANDBY);
> +}
> +
> +static int ov5695_s_stream(struct v4l2_subdev *sd, int on)
> +{
> + struct ov5695 *ov5695 = to_ov5695(sd);
> + struct i2c_client *client = ov5695->client;
> + int ret = 0;
> +
> + mutex_lock(&ov5695->mutex);
> + on = !!on;
> + if (on == ov5695->streaming)
> + goto unlock_and_return;
> +
> + if (on) {
> + ret = pm_runtime_get_sync(&client->dev);
> + if (ret)
> + goto unlock_and_return;
> +
> + ret = __ov5695_start_stream(ov5695);
> + if (ret) {
> + v4l2_err(sd, "start stream failed while write regs\n");
> + pm_runtime_put(&client->dev);
Here you will set "ov5695->streaming = 1". Should't you jump to the
"unlock_and_return" label instead?
> + }
> + } else {
> + ret = __ov5695_stop_stream(ov5695);
> + if (ret)
> + goto unlock_and_return;
> + pm_runtime_put(&client->dev);
I would runtime_put even if writing to REG_CTRL_MODE fails.
> + }
> +
> + ov5695->streaming = on;
> +
> +unlock_and_return:
> + mutex_unlock(&ov5695->mutex);
> + return ret;
> +}
> +
> +static int __ov5695_power_on(struct ov5695 *ov5695)
> +{
> + int ret;
> + struct device *dev = &ov5695->client->dev;
> +
> + ret = clk_prepare_enable(ov5695->xvclk);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable xvclk\n");
> + return ret;
> + }
> +
> + gpiod_set_value_cansleep(ov5695->reset_gpio, 1);
> +
> + /* AVDD and DOVDD may rise in any order */
> + ret = regulator_enable(ov5695->avdd_regulator);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable regulator\n");
> + goto disable_clk;
> + }
> + ret = regulator_enable(ov5695->dovdd_regulator);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable DOVDD regulator\n");
> + goto disable_avdd;
> + }
> + /* DVDD must rise after AVDD and DOVDD */
> + ret = regulator_enable(ov5695->dvdd_regulator);
> + if (ret < 0) {
> + dev_err(dev, "Failed to enable DVDD regulator\n");
> + goto disable_dovdd;
> + }
> +
> + gpiod_set_value_cansleep(ov5695->reset_gpio, 0);
> + /* 8192 cycles prior to first SCCB transaction */
> + usleep_range(1000, 1500);
I assume 8192 xvclk cycles, shouldn't the delay be calculated using
that value? (or does the (1000, 1500) intervals catches all the
supported xvclk frequencies?)
> +
> + return 0;
> +
> +disable_dovdd:
> + regulator_disable(ov5695->dovdd_regulator);
> +disable_avdd:
> + regulator_disable(ov5695->avdd_regulator);
> +disable_clk:
> + clk_disable_unprepare(ov5695->xvclk);
> +
> + return ret;
> +}
> +
> +static void __ov5695_power_off(struct ov5695 *ov5695)
> +{
> + clk_disable_unprepare(ov5695->xvclk);
> + gpiod_set_value_cansleep(ov5695->reset_gpio, 1);
> + regulator_disable(ov5695->dvdd_regulator);
> + regulator_disable(ov5695->dovdd_regulator);
> + regulator_disable(ov5695->avdd_regulator);
> +}
> +
> +static int ov5695_runtime_resume(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct ov5695 *ov5695 = to_ov5695(sd);
> + int ret;
> +
> + ret = __ov5695_power_on(ov5695);
> + if (ret)
> + return ret;
> +
> + if (ov5695->streaming) {
> + ret = __ov5695_start_stream(ov5695);
> + if (ret)
> + __ov5695_power_off(ov5695);
> + }
If you fix my comment above on s_stream, you won't have any case where
runtime_susped is called with "ov5695->streaming = 1" and you can
remove this if branch.
> +
> + return ret;
> +}
> +
> +static int ov5695_runtime_suspend(struct device *dev)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct v4l2_subdev *sd = i2c_get_clientdata(client);
> + struct ov5695 *ov5695 = to_ov5695(sd);
> +
> + __ov5695_power_off(ov5695);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> +static int ov5695_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
> +{
> + struct ov5695 *ov5695 = to_ov5695(sd);
> + struct v4l2_mbus_framefmt *try_fmt =
> + v4l2_subdev_get_try_format(sd, fh->pad, 0);
> +
> + mutex_lock(&ov5695->mutex);
> + /* Initialize try_fmt */
> + try_fmt->width = ov5695->cur_mode->width;
> + try_fmt->height = ov5695->cur_mode->height;
> + try_fmt->code = MEDIA_BUS_FMT_SBGGR10_1X10;
> + try_fmt->field = V4L2_FIELD_NONE;
> +
> + mutex_unlock(&ov5695->mutex);
> + /* No crop or compose */
Checkpatch should complain about returns with no blank line before
(here and in many other places in this patch).
Maybe try run it with --strict switch...
> + return 0;
> +}
> +#endif
> +
> +static const struct dev_pm_ops ov5695_pm_ops = {
> + SET_RUNTIME_PM_OPS(ov5695_runtime_suspend,
> + ov5695_runtime_resume, NULL)
> +};
> +
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> +static const struct v4l2_subdev_internal_ops ov5695_internal_ops = {
> + .open = ov5695_open,
> +};
> +#endif
> +
> +static struct v4l2_subdev_video_ops ov5695_video_ops = {
> + .s_stream = ov5695_s_stream,
> +};
> +
> +static struct v4l2_subdev_pad_ops ov5695_pad_ops = {
> + .enum_mbus_code = ov5695_enum_mbus_code,
> + .enum_frame_size = ov5695_enum_frame_sizes,
> + .get_fmt = ov5695_get_fmt,
> + .set_fmt = ov5695_set_fmt,
> +};
> +
> +static struct v4l2_subdev_ops ov5695_subdev_ops = {
> + .video = &ov5695_video_ops,
> + .pad = &ov5695_pad_ops,
> +};
> +
> +static int ov5695_set_ctrl(struct v4l2_ctrl *ctrl)
> +{
> + struct ov5695 *ov5695 = container_of(ctrl->handler,
> + struct ov5695, ctrl_handler);
> + struct i2c_client *client = ov5695->client;
> + s64 max;
> + int ret = 0;
> +
> + /* Propagate change of current control to all related controls */
> + switch (ctrl->id) {
> + case V4L2_CID_VBLANK:
> + /* Update max exposure while meeting expected vblanking */
> + max = ov5695->cur_mode->height + ctrl->val - 4;
> + __v4l2_ctrl_modify_range(ov5695->exposure,
> + ov5695->exposure->minimum, max,
> + ov5695->exposure->step,
> + ov5695->exposure->default_value);
> + break;
> + }
> +
> + pm_runtime_get_sync(&client->dev);
> + switch (ctrl->id) {
> + case V4L2_CID_EXPOSURE:
> + ov5695_set_exposure(ov5695, ctrl->val);
> + break;
> + case V4L2_CID_ANALOGUE_GAIN:
> + ov5695_set_analog_gain(ov5695, ctrl->val);
> + break;
> + case V4L2_CID_DIGITAL_GAIN:
> + ov5695_set_digi_gain(ov5695, ctrl->val);
> + break;
> + case V4L2_CID_VBLANK:
> + ov5695_set_vts(ov5695, ctrl->val);
> + break;
> + case V4L2_CID_TEST_PATTERN:
> + ret = ov5695_enable_test_pattern(ov5695, ctrl->val);
> + break;
> + default:
> + dev_warn(&client->dev, "%s Unhandled id:0x%x, val:0x%x\n",
> + __func__, ctrl->id, ctrl->val);
> + break;
> + };
> + pm_runtime_put(&client->dev);
> +
> + return ret;
> +}
> +
> +static const struct v4l2_ctrl_ops ov5695_ctrl_ops = {
> + .s_ctrl = ov5695_set_ctrl,
> +};
> +
> +static int ov5695_initialize_controls(struct ov5695 *ov5695)
> +{
> + const struct ov5695_mode *mode;
> + struct v4l2_ctrl_handler *handler;
> + struct v4l2_ctrl *ctrl;
> + s64 exposure_max, vblank_def;
> + u32 h_blank;
> + int ret;
> +
> + handler = &ov5695->ctrl_handler;
> + mode = ov5695->cur_mode;
> + ret = v4l2_ctrl_handler_init(handler, 1);
> + if (ret)
> + return ret;
> + handler->lock = &ov5695->mutex;
> +
> + ctrl = v4l2_ctrl_new_int_menu(handler, NULL, V4L2_CID_LINK_FREQ,
> + 0, 0, link_freq_menu_items);
> + if (ctrl)
> + ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + v4l2_ctrl_new_std(handler, NULL, V4L2_CID_PIXEL_RATE,
> + 0, OV5695_PIXEL_RATE, 1, OV5695_PIXEL_RATE);
> +
> + h_blank = mode->hts_def - mode->width;
> + ov5695->hblank = v4l2_ctrl_new_std(handler, NULL, V4L2_CID_HBLANK,
> + h_blank, h_blank, 1, h_blank);
> + if (ov5695->hblank)
> + ov5695->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
> + vblank_def = mode->vts_def - mode->height;
> + ov5695->vblank = v4l2_ctrl_new_std(handler, &ov5695_ctrl_ops,
> + V4L2_CID_VBLANK, vblank_def,
> + OV5695_VTS_MAX - mode->height,
> + 1, vblank_def);
> +
> + exposure_max = mode->vts_def - 4;
> + ov5695->exposure = v4l2_ctrl_new_std(handler, &ov5695_ctrl_ops,
> + V4L2_CID_EXPOSURE, OV5695_EXPOSURE_MIN,
> + exposure_max, OV5695_EXPOSURE_STEP,
> + mode->exp_def);
> +
> + ov5695->anal_gain = v4l2_ctrl_new_std(handler, &ov5695_ctrl_ops,
> + V4L2_CID_ANALOGUE_GAIN, ANALOG_GAIN_MIN,
> + ANALOG_GAIN_MAX, ANALOG_GAIN_STEP,
> + ANALOG_GAIN_DEFAULT);
> +
> + /* Digital gain */
> + ov5695->digi_gain = v4l2_ctrl_new_std(handler, &ov5695_ctrl_ops,
> + V4L2_CID_DIGITAL_GAIN, OV5695_DIGI_GAIN_MIN,
> + OV5695_DIGI_GAIN_MAX, OV5695_DIGI_GAIN_STEP,
> + OV5695_DIGI_GAIN_DEFAULT);
> +
> + ov5695->test_pattern = v4l2_ctrl_new_std_menu_items(handler,
> + &ov5695_ctrl_ops, V4L2_CID_TEST_PATTERN,
> + ARRAY_SIZE(ov5695_test_pattern_menu) - 1,
> + 0, 0, ov5695_test_pattern_menu);
> +
> + if (handler->error) {
> + v4l2_ctrl_handler_free(handler);
> + return handler->error;
> + }
> +
> + ov5695->subdev.ctrl_handler = handler;
> +
> + return 0;
> +}
> +
> +static int ov5695_check_sensor_id(struct ov5695 *ov5695,
> + struct i2c_client *client)
> +{
> + struct device *dev = &ov5695->client->dev;
> + u32 id;
> + int ret;
> +
> + ret = __ov5695_power_on(ov5695);
> + if (ret)
> + return ret;
> + ov5695_read_reg(client, OV5695_REG_CHIP_ID,
> + OV5695_REG_VALUE_24BIT, &id);
> + __ov5695_power_off(ov5695);
> +
> + if (id != CHIP_ID) {
> + dev_err(dev, "Wrong camera sensor id(%06x)\n", id);
> + return -EINVAL;
> + }
> +
> + dev_info(dev, "Detected OV%06x sensor\n", CHIP_ID);
> +
> + return 0;
> +}
> +
> +static int ov5695_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct ov5695 *ov5695;
> + struct v4l2_subdev *sd;
> + int ret;
> +
> + ov5695 = devm_kzalloc(dev, sizeof(*ov5695), GFP_KERNEL);
> + if (!ov5695)
> + return -ENOMEM;
> +
> + ov5695->client = client;
> + ov5695->cur_mode = &supported_modes[0];
> +
> + ov5695->xvclk = devm_clk_get(dev, "xvclk");
> + if (IS_ERR(ov5695->xvclk)) {
> + dev_err(dev, "Failed to get xvclk\n");
> + return -EINVAL;
> + }
> + ret = clk_set_rate(ov5695->xvclk, 24000000);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set xvclk rate (24M)\n");
> + return ret;
> + }
> +
> + ov5695->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
> + if (IS_ERR(ov5695->reset_gpio)) {
> + dev_err(dev, "Failed to get reset-gpios\n");
> + return -EINVAL;
> + }
> +
> + ov5695->avdd_regulator = devm_regulator_get(dev, "avdd");
> + if (IS_ERR(ov5695->avdd_regulator)) {
> + dev_err(dev, "Failed to get avdd-supply\n");
> + return -EINVAL;
> + }
> + ov5695->dovdd_regulator = devm_regulator_get(dev, "dovdd");
> + if (IS_ERR(ov5695->dovdd_regulator)) {
> + dev_err(dev, "Failed to get dovdd-supply\n");
> + return -EINVAL;
> + }
> + ov5695->dvdd_regulator = devm_regulator_get(dev, "dvdd");
> + if (IS_ERR(ov5695->dvdd_regulator)) {
> + dev_err(dev, "Failed to get dvdd-supply\n");
> + return -EINVAL;
> + }
> +
> + mutex_init(&ov5695->mutex);
> +
> + sd = &ov5695->subdev;
> + v4l2_i2c_subdev_init(sd, client, &ov5695_subdev_ops);
> +#ifdef CONFIG_VIDEO_V4L2_SUBDEV_API
> + sd->internal_ops = &ov5695_internal_ops;
> +#endif
> + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
Shouldn't a devnode be registered only if V4L2_SUBDEV_API is defined?
Thanks
j
> +
> + ret = ov5695_initialize_controls(ov5695);
> + if (ret)
> + return ret;
> + ret = ov5695_check_sensor_id(ov5695, client);
> + if (ret)
> + return ret;
> +
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + ov5695->pad.flags = MEDIA_PAD_FL_SOURCE;
> + sd->entity.function = MEDIA_ENT_F_CAM_SENSOR;
> + ret = media_entity_pads_init(&sd->entity, 1, &ov5695->pad);
> + if (ret < 0)
> + return ret;
> +#endif
> +
> + ret = v4l2_async_register_subdev(sd);
> + if (ret) {
> + dev_err(dev, "v4l2 async register subdev failed\n");
> + goto clean_entity;
> + }
> +
> + pm_runtime_enable(dev);
> + dev_info(dev, "Probe successfully\n");
> +
> + return 0;
> +
> +clean_entity:
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> + media_entity_cleanup(&sd->entity);
> +#endif
> +
> + return ret;
> +}
> +
> +static int ov5695_remove(struct i2c_client *client)
> +{
> + struct ov5695 *ov5695 = i2c_get_clientdata(client);
> +
> + v4l2_async_unregister_subdev(&ov5695->subdev);
> +
> + pm_runtime_disable(&client->dev);
> + return 0;
> +}
> +
> +static const struct of_device_id ov5695_of_match[] = {
> + { .compatible = "ovti,ov5695" },
> + {},
> +};
> +
> +static struct i2c_driver ov5695_i2c_driver = {
> + .driver = {
> + .name = "ov5695",
> + .owner = THIS_MODULE,
> + .pm = &ov5695_pm_ops,
> + .of_match_table = ov5695_of_match
> + },
> + .probe = &ov5695_probe,
> + .remove = &ov5695_remove,
> +};
> +
> +module_i2c_driver(ov5695_i2c_driver);
> +
> +MODULE_DESCRIPTION("OmniVision ov5695 sensor driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-01-02 10:09 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-29 8:08 [PATCH v2 1/4] media: ov5695: add support for OV5695 sensor Shunqian Zheng
[not found] ` <1514534905-21393-1-git-send-email-zhengsq-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2017-12-29 8:08 ` [PATCH v2 2/4] [media] dt/bindings: Add bindings for OV5695 Shunqian Zheng
[not found] ` <1514534905-21393-2-git-send-email-zhengsq-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2018-01-02 9:19 ` jacopo mondi
2018-01-02 14:25 ` Sakari Ailus
2017-12-29 8:08 ` [PATCH v2 3/4] media: ov2685: add support for OV2685 sensor Shunqian Zheng
2018-01-03 11:43 ` Sakari Ailus
2018-01-08 13:37 ` Shunqian Zheng
2018-01-08 22:23 ` Sakari Ailus
2018-01-12 2:30 ` Shunqian Zheng
[not found] ` <8f60a7f8-8471-85e8-70d3-520701edc092-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2018-01-31 20:44 ` Sakari Ailus
2017-12-29 8:08 ` [PATCH v2 4/4] [media] dt/bindings: Add bindings for OV2685 Shunqian Zheng
[not found] ` <1514534905-21393-4-git-send-email-zhengsq-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2018-01-03 12:14 ` Sakari Ailus
2018-01-02 10:09 ` jacopo mondi [this message]
2018-01-08 13:40 ` [PATCH v2 1/4] media: ov5695: add support for OV5695 sensor Shunqian Zheng
2018-01-03 14:30 ` Sakari Ailus
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180102100938.GE4314@w540 \
--to=jacopo-aw8dsiih9cednm+yrofe0a@public.gmane.org \
--cc=ddl-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-media-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mchehab-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tfiga-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=zhengsq-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).