From mboxrd@z Thu Jan 1 00:00:00 1970 From: Dong Aisheng Subject: Re: [PATCH 7/7] ARM: dts: imx6ull: add UART8 support Date: Tue, 9 Jan 2018 17:38:21 +0800 Message-ID: <20180109093821.GF26312@b29396-OptiPlex-7040> References: <20180102164223.15230-1-stefan@agner.ch> <20180102164223.15230-7-stefan@agner.ch> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20180102164223.15230-7-stefan@agner.ch> Sender: linux-kernel-owner@vger.kernel.org To: Stefan Agner Cc: shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com, robh+dt@kernel.org, mark.rutland@arm.com, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Tue, Jan 02, 2018 at 05:42:23PM +0100, Stefan Agner wrote: > In i.MX 6ULL UART8 is part of the AIPS-3 memory map instead of > AIPS-1. Clocks and interrupts remain the same. > > Signed-off-by: Stefan Agner Acked-by: Dong Aisheng Regards Dong Aisheng > --- > arch/arm/boot/dts/imx6ull.dtsi | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm/boot/dts/imx6ull.dtsi b/arch/arm/boot/dts/imx6ull.dtsi > index bc2cd4fb8b12..571ddd71cdba 100644 > --- a/arch/arm/boot/dts/imx6ull.dtsi > +++ b/arch/arm/boot/dts/imx6ull.dtsi > @@ -43,6 +43,9 @@ > #include "imx6ull-pinfunc.h" > #include "imx6ull-pinfunc-snvs.h" > > +/* Delete UART8 in AIPS-1 (i.MX6UL specific) */ > +/delete-node/ &uart8; > + > / { > soc { > aips3: aips-bus@2200000 { > @@ -56,6 +59,17 @@ > compatible = "fsl,imx6ull-iomuxc-snvs"; > reg = <0x02290000 0x4000>; > }; > + > + uart8: serial@2288000 { > + compatible = "fsl,imx6ul-uart", > + "fsl,imx6q-uart"; > + reg = <0x02288000 0x4000>; > + interrupts = ; > + clocks = <&clks IMX6UL_CLK_UART8_IPG>, > + <&clks IMX6UL_CLK_UART8_SERIAL>; > + clock-names = "ipg", "per"; > + status = "disabled"; > + }; > }; > }; > }; > -- > 2.15.1 >