From: Michael Lyle <mlyle-dTEscH1tG2Q@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
CHANHO PARK
<chanho61.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Krzysztof Kozlowski
<krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Michael Lyle <mlyle-dTEscH1tG2Q@public.gmane.org>
Subject: [PATCH v3] ARM: dts: exynos-artik5: add support for wlan
Date: Thu, 1 Feb 2018 13:16:56 -0800 [thread overview]
Message-ID: <20180201211656.11829-1-mlyle@lyle.org> (raw)
On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
it, and turn on the regulator used for it, so that both wifi & bluetooth
work.
Verified to work on the Artik 520 evaluation board.
v2: accidentally sent out v1
v3: non-removable instead of broken-cd, alphabetical order, formatting
Signed-off-by: Michael Lyle <mlyle-dTEscH1tG2Q@public.gmane.org>
---
arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
index 0aa577fe9f95..620b50c19ead 100644
--- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
+++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
@@ -245,6 +245,7 @@
regulator-name = "VLDO23_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
};
ldo24_reg: LDO24 {
@@ -316,6 +317,41 @@
status = "okay";
};
+&mshc_1 {
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ non-removable;
+ keep-power-in-suspend;
+ fifo-depth = <0x40>;
+ vqmmc-supply = <&ldo11_reg>;
+ /*
+ * Voltage negotiation is broken for the SDIO periph so we
+ * can't actually set the voltage here.
+ * vmmc-supply = <&ldo23_reg>;
+ */
+ card-detect-delay = <500>;
+ clock-frequency = <100000000>;
+ max-frequency = <100000000>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&pinctrl_1 {
+ wlanen: wlanen {
+ samsung,pins = "gpx2-3";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
+ samsung,pin-val = <1>;
+ };
+};
+
&rtc {
clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
clock-names = "rtc", "rtc_src";
--
2.14.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2018-02-01 21:16 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-01 21:16 Michael Lyle [this message]
[not found] ` <20180201211656.11829-1-mlyle-dTEscH1tG2Q@public.gmane.org>
2018-02-04 16:26 ` [PATCH v3] ARM: dts: exynos-artik5: add support for wlan Krzysztof Kozlowski
2018-02-04 18:18 ` Michael Lyle
2018-02-12 18:49 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180201211656.11829-1-mlyle@lyle.org \
--to=mlyle-dtesch1tg2q@public.gmane.org \
--cc=chanho61.park-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kgene-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=krzk-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-samsung-soc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).