devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Tony Lindgren <tony@atomide.com>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Russell King <linux@armlinux.org.uk>,
	Kishon Vijay Abraham I <kishon@ti.com>,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 08/16] mmc: sdhci-omap: Add support to override f_max and iodelay from pdata
Date: Mon, 5 Feb 2018 18:20:21 +0530	[thread overview]
Message-ID: <20180205125029.21570-9-kishon@ti.com> (raw)
In-Reply-To: <20180205125029.21570-1-kishon@ti.com>

DRA74x EVM Rev H EVM comes with revision 2.0 silicon. However, earlier
versions of EVM can come with either revision 1.1 or revision 1.0 of
silicon.

The device-tree file is written to support rev 2.0 of silicon.
pdata-quirks are used to then override the settings needed for
PG 1.1 silicon.

PG 1.1 silicon has limitations w.r.t frequencies at which MMC1/2/3
can operate as well as different IOdelay numbers.

Add support in sdhci-omap driver to get platform data if available
(added using pdata quirks) and override the data (max-frequency and
iodelay data) obtained from device tree.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 drivers/mmc/host/sdhci-omap.c            | 21 ++++++++++++++++++++-
 include/linux/platform_data/sdhci-omap.h | 22 ++++++++++++++++++++++
 2 files changed, 42 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/platform_data/sdhci-omap.h

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index d5a9e688dc1b..c2570db3f7a2 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -22,6 +22,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/platform_data/sdhci-omap.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
@@ -99,6 +100,7 @@ struct sdhci_omap_data {
 };
 
 struct sdhci_omap_host {
+	char			*version;
 	void __iomem		*base;
 	struct device		*dev;
 	struct	regulator	*pbias;
@@ -732,12 +734,21 @@ static struct pinctrl_state
 				  u32 *caps, u32 capmask)
 {
 	struct device *dev = omap_host->dev;
+	char *version = omap_host->version;
 	struct pinctrl_state *pinctrl_state = ERR_PTR(-ENODEV);
+	char str[20];
 
 	if (!(*caps & capmask))
 		goto ret;
 
-	pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
+	if (version) {
+		snprintf(str, 20, "%s-%s", mode, version);
+		pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, str);
+	}
+
+	if (IS_ERR(pinctrl_state))
+		pinctrl_state = pinctrl_lookup_state(omap_host->pinctrl, mode);
+
 	if (IS_ERR(pinctrl_state)) {
 		dev_err(dev, "no pinctrl state for %s mode", mode);
 		*caps &= ~capmask;
@@ -840,6 +851,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	struct mmc_host *mmc;
 	const struct of_device_id *match;
 	struct sdhci_omap_data *data;
+	struct sdhci_omap_platform_data *platform_data;
 
 	match = of_match_device(omap_sdhci_match, dev);
 	if (!match)
@@ -874,6 +886,13 @@ static int sdhci_omap_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_pltfm_free;
 
+	platform_data = dev_get_platdata(dev);
+	if (platform_data) {
+		omap_host->version = platform_data->version;
+		if (platform_data->max_freq)
+			mmc->f_max = platform_data->max_freq;
+	}
+
 	pltfm_host->clk = devm_clk_get(dev, "fck");
 	if (IS_ERR(pltfm_host->clk)) {
 		ret = PTR_ERR(pltfm_host->clk);
diff --git a/include/linux/platform_data/sdhci-omap.h b/include/linux/platform_data/sdhci-omap.h
new file mode 100644
index 000000000000..92abd53dcd00
--- /dev/null
+++ b/include/linux/platform_data/sdhci-omap.h
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Texas Instruments
+// SDHCI Controller Platform Data for TI's OMAP SoCs
+// Author: Kishon Vijay Abraham I <kishon@ti.com>
+
+#ifndef __SDHCI_OMAP_PDATA_H__
+#define __SDHCI_OMAP_PDATA_H__
+
+struct sdhci_omap_platform_data {
+	const char *name;
+
+	/*
+	 * set if your board has components or wiring that limits the
+	 * maximum frequency on the MMC bus
+	 */
+	unsigned int max_freq;
+
+	/* string specifying a particular variant of hardware */
+	char *version;
+};
+
+#endif
-- 
2.11.0

  parent reply	other threads:[~2018-02-05 12:50 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-05 12:50 [PATCH v2 00/16] mmc: sdhci-omap: Add UHS/HS200 mode support Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 01/16] mmc: sdhci-omap: Update 'power_mode' outside sdhci_omap_init_74_clocks Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 02/16] mmc: sdhci-omap: Add card_busy host ops Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 03/16] mmc: sdhci-omap: Add custom set_uhs_signaling sdhci_host ops Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 04/16] mmc: sdhci-omap: Add tuning support Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 05/16] mmc: sdhci-omap: Workaround for Errata i802 Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 06/16] mmc: sdhci_omap: Add support to set IODELAY values Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 07/16] mmc: sdhci_omap: Fix sdhci-omap quirks Kishon Vijay Abraham I
2018-02-05 12:50 ` Kishon Vijay Abraham I [this message]
2018-02-14  9:53   ` [PATCH v2 08/16] mmc: sdhci-omap: Add support to override f_max and iodelay from pdata Ulf Hansson
2018-02-14 17:24     ` Tony Lindgren
2018-02-16  8:08       ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 09/16] mmc: sdhci: Add quirk to disable HW timeout Kishon Vijay Abraham I
2018-02-19  8:51   ` Adrian Hunter
2018-03-05  9:30     ` Kishon Vijay Abraham I
2018-03-05  9:38       ` Adrian Hunter
2018-03-14 13:25         ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 10/16] mmc: sdhci: Fix to use data_timer only for data line commands Kishon Vijay Abraham I
2018-02-19  8:03   ` Adrian Hunter
2018-02-19 12:55     ` Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 11/16] mmc: sdhci: Program a relatively accurate SW timeout value Kishon Vijay Abraham I
     [not found]   ` <20180205125029.21570-12-kishon-l0cyMroinI0@public.gmane.org>
2018-02-16  7:17     ` Kishon Vijay Abraham I
2018-02-19  9:24   ` Adrian Hunter
2018-02-19 13:13     ` Adrian Hunter
2018-02-05 12:50 ` [PATCH v2 12/16] mmc: sdhci-omap: Workaround for Errata i834 Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 13/16] dt-bindings: sdhci-omap: Add K2G specific binding Kishon Vijay Abraham I
2018-02-05 12:50 ` [PATCH v2 14/16] mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC Kishon Vijay Abraham I
     [not found] ` <20180205125029.21570-1-kishon-l0cyMroinI0@public.gmane.org>
2018-02-05 12:50   ` [PATCH v2 15/16] mmc: sdhci-omap: Add SPDX identifier Kishon Vijay Abraham I
     [not found]     ` <20180205125029.21570-16-kishon-l0cyMroinI0@public.gmane.org>
2018-02-05 21:50       ` Joe Perches
2018-02-19  9:33     ` Adrian Hunter
2018-02-14 10:38   ` [PATCH v2 00/16] mmc: sdhci-omap: Add UHS/HS200 mode support Ulf Hansson
2018-02-05 12:50 ` [PATCH v2 16/16] ARM: OMAP2+: Use sdhci-omap specific pdata-quirks for MMC/SD on DRA74x EVM Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180205125029.21570-9-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).