From: Sean Paul <seanpaul@chromium.org>
To: dri-devel@lists.freedesktop.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org
Cc: "Thierry Reding" <thierry.reding@gmail.com>,
"Jeffy Chen" <jeffy.chen@rock-chips.com>,
"Doug Anderson" <dianders@chromium.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Stéphane Marchesin" <marcheu@chromium.org>
Subject: [PATCH 2/3] drm/panel: simple: Use display_timing for lq123p1jx31
Date: Tue, 6 Feb 2018 11:56:21 -0500 [thread overview]
Message-ID: <20180206165626.37692-3-seanpaul@chromium.org> (raw)
In-Reply-To: <20180206165626.37692-1-seanpaul@chromium.org>
Convert the sharp lq123p1jx31 from using a fixed mode to specifying a
display timing with min/typ/max values. This allows us to capture the
timings set forth in the datasheet as well as the additional values that
we've cleared with the display vendor to avoid interference with the
digitizer on the Samsung Chromebook Plus (kevin).
A follow-on patch will specify the override mode for kevin devices.
Cc: Doug Anderson <dianders@chromium.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jeffy Chen <jeffy.chen@rock-chips.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-rockchip@lists.infradead.org
Signed-off-by: Sean Paul <seanpaul@chromium.org>
---
drivers/gpu/drm/panel/panel-simple.c | 27 +++++++++++++--------------
1 file changed, 13 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index b774365f3635..2619b24d7e3b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1808,23 +1808,22 @@ static const struct panel_desc sharp_lq101k1ly04 = {
.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA,
};
-static const struct drm_display_mode sharp_lq123p1jx31_mode = {
- .clock = 252750,
- .hdisplay = 2400,
- .hsync_start = 2400 + 48,
- .hsync_end = 2400 + 48 + 32,
- .htotal = 2400 + 48 + 32 + 80,
- .vdisplay = 1600,
- .vsync_start = 1600 + 3,
- .vsync_end = 1600 + 3 + 10,
- .vtotal = 1600 + 3 + 10 + 33,
- .vrefresh = 60,
- .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+static const struct display_timing sharp_lq123p1jx31_timing = {
+ .pixelclock = { 252750000, 252750000, 266604720 },
+ .hactive = { 2400, 2400, 2400 },
+ .hfront_porch = { 48, 48, 48 },
+ .hback_porch = { 80, 80, 84 },
+ .hsync_len = { 32, 32, 32 },
+ .vactive = { 1600, 1600, 1600 },
+ .vfront_porch = { 3, 3, 3 },
+ .vback_porch = { 33, 33, 120 },
+ .vsync_len = { 10, 10, 10 },
+ .flags = DISPLAY_FLAGS_VSYNC_LOW | DISPLAY_FLAGS_HSYNC_LOW,
};
static const struct panel_desc sharp_lq123p1jx31 = {
- .modes = &sharp_lq123p1jx31_mode,
- .num_modes = 1,
+ .timings = &sharp_lq123p1jx31_timing,
+ .num_timings = 1,
.bpc = 8,
.size = {
.width = 259,
--
2.16.0.rc1.238.g530d649a79-goog
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2018-02-06 16:56 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-06 16:56 [PATCH 0/3] drm/panel: simple: Add mode support to devicetree Sean Paul
2018-02-06 16:56 ` [PATCH 1/3] drm/panel: simple: Add ability to override typical timing Sean Paul
[not found] ` <20180206165626.37692-2-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-02-06 20:19 ` Rob Herring
2018-02-06 21:48 ` Sean Paul
2018-02-07 17:41 ` Rob Herring
[not found] ` <CAL_JsqJDvPN3CtKtj980egDRuC-ZjiKOAWe5ECYVBSv4hVOnYw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2018-02-07 19:27 ` Sean Paul
2018-02-07 9:51 ` Thierry Reding
2018-02-06 16:56 ` Sean Paul [this message]
2018-02-06 16:56 ` [PATCH 3/3] arm64: dts: rockchip: Specify override mode for kevin panel Sean Paul
[not found] ` <20180206165626.37692-1-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-02-07 9:16 ` [PATCH 0/3] drm/panel: simple: Add mode support to devicetree Eric Anholt
2018-02-07 15:27 ` Sean Paul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180206165626.37692-3-seanpaul@chromium.org \
--to=seanpaul@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jeffy.chen@rock-chips.com \
--cc=linux-rockchip@lists.infradead.org \
--cc=marcheu@chromium.org \
--cc=robh+dt@kernel.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).