From: Sean Paul <seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
To: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: "Sean Paul" <seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
"Doug Anderson"
<dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
"Eric Anholt" <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>,
"Heiko Stuebner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>,
"Jeffy Chen" <jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Stéphane Marchesin"
<marcheu-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
"Thierry Reding"
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Catalin Marinas" <catalin.marinas-5wv7dgnIgG8@public.gmane.org>,
"Will Deacon" <will.deacon-5wv7dgnIgG8@public.gmane.org>,
"Brian Norris"
<briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
"Matthias Kaehlcke" <mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
"Arnd Bergmann" <arnd-r2nGTMty4D4@public.gmane.org>,
"Emil Renner Berthing" <kernel-sKpHZLTYfq0@public.gmane.org>,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v2 5/5] arm64: dts: rockchip: Specify override mode for kevin panel
Date: Wed, 7 Feb 2018 12:23:59 -0500 [thread overview]
Message-ID: <20180207172404.107358-6-seanpaul@chromium.org> (raw)
In-Reply-To: <20180207172404.107358-1-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
This patch adds an override mode for kevin devices. The mode increases
both back porches to allow a pixel clock of 26666kHz as opposed to the
'typical' value of 252750kHz. This is needed to avoid interference with
the touch digitizer on these laptops.
Changes in v2:
- Wrap the timing in display-timings node to match binding (Rob/Thierry)
Cc: Doug Anderson <dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Cc: Eric Anholt <eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org>
Cc: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Cc: Jeffy Chen <jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Stéphane Marchesin <marcheu-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
Cc: Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
Cc: linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Signed-off-by: Sean Paul <seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
---
arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
index 191a6bcb1704..800eabd39076 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts
@@ -98,6 +98,22 @@
backlight = <&backlight>;
power-supply = <&pp3300_disp>;
+ display-timings {
+ timing0: override {
+ clock-frequency = <266604720>;
+ hactive = <2400>;
+ hfront-porch = <48>;
+ hback-porch = <84>;
+ hsync-len = <32>;
+ hsync-active = <0>;
+ vactive = <1600>;
+ vfront-porch = <3>;
+ vback-porch = <120>;
+ vsync-len = <10>;
+ vsync-active = <0>;
+ };
+ };
+
ports {
panel_in_edp: endpoint {
remote-endpoint = <&edp_out_panel>;
--
2.16.0.rc1.238.g530d649a79-goog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2018-02-07 17:23 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-07 17:23 [PATCH v2 0/5] drm/panel: simple: Add mode support to devicetree Sean Paul
2018-02-07 17:23 ` [PATCH v2 1/5] dt-bindings: Add headings to simple-panel bindings Sean Paul
2018-02-07 17:23 ` [PATCH v2 2/5] dt-bindings: Add display-timing subnode to simple-panel Sean Paul
2018-02-07 17:23 ` [PATCH v2 4/5] drm/panel: simple: Use display_timing for lq123p1jx31 Sean Paul
[not found] ` <20180207172404.107358-1-seanpaul-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>
2018-02-07 17:23 ` [PATCH v2 3/5] drm/panel: simple: Add ability to override typical timing Sean Paul
2018-02-07 17:23 ` Sean Paul [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180207172404.107358-6-seanpaul@chromium.org \
--to=seanpaul-f7+t8e8rja9g9huczpvpmw@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=briannorris-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=catalin.marinas-5wv7dgnIgG8@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=dri-devel-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org \
--cc=eric-WhKQ6XTQaPysTnJN9+BGXg@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=jeffy.chen-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=kernel-sKpHZLTYfq0@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=marcheu-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mka-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=will.deacon-5wv7dgnIgG8@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).