[PATCH 2/3] Documentation: bindings: add usb3-host-disable and usb3-host-port for Rockchip USB Type-C PHY

[Enric Balletbo i Serra <enric.balletbo@collabora.com>]

From: William wu <wulf@rock-chips.com>

rockchip,usb3-host-disable is the register of type-c phy disable usb3 host
rockchip,usb3-host-port is the register of type-c phy usb3 port number

Signed-off-by: William wu <wulf@rock-chips.com>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
index c3be83be9615..9085d95d0079 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt
@@ -36,6 +36,12 @@ offset, enable bit, write mask bit.
  - rockchip,uphy-dp-sel : the register of type-c phy enable DP function
    for type-c phy0, it must be <0x6268 19 19>;
    for type-c phy1, it must be <0x6268 3 19>;
+ - rockchip,usb3-host-disable : the register of type-c phy disable usb3 host
+   for type-c phy0, it must be <0x2434 0 16>;
+   for type-c phy1, it must be <0x2444 0 16>;
+ - rockchip,usb3-host-port : the register of type-c phy usb3 port number
+   for type-c phy0, it must be <0x2434 12 28>;
+   for type-c phy1, it must be <0x2444 12 28>;
 
 Required nodes : a sub-node is required for each port the phy provides.
 		 The sub-node name is used to identify dp or usb3 port,
-- 
2.15.1