From: Lina Iyer <ilina@codeaurora.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Cc: sboyd@codeaurora.org, rnayak@codeaurora.org,
msivasub@codeaurora.org, bjorn.andersson@linaro.org,
linux-kernel@vger.kernel.org, Lina Iyer <ilina@codeaurora.org>,
devicetree@vger.kernel.org
Subject: [PATCH v2 2/2] dt-bindings: introduce Command DB for QCOM SoCs
Date: Thu, 8 Feb 2018 12:51:54 -0700 [thread overview]
Message-ID: <20180208195154.3580-3-ilina@codeaurora.org> (raw)
In-Reply-To: <20180208195154.3580-1-ilina@codeaurora.org>
From: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Command DB provides information on shared resources like clocks,
regulators etc., probed at boot by the remote subsytem and made
available in shared memory.
Cc: devicetree@vger.kernel.org
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
---
.../devicetree/bindings/arm/msm/cmd-db.txt | 38 ++++++++++++++++++++++
1 file changed, 38 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/msm/cmd-db.txt
diff --git a/Documentation/devicetree/bindings/arm/msm/cmd-db.txt b/Documentation/devicetree/bindings/arm/msm/cmd-db.txt
new file mode 100644
index 000000000000..e21666e40ebf
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/cmd-db.txt
@@ -0,0 +1,38 @@
+Command DB
+---------
+
+Command DB is a database that provides a mapping between resource key and the
+resource address for a system resource managed by a remote processor. The data
+is stored in a shared memory region and is loaded by the remote processor.
+
+Some of the Qualcomm Technologies Inc SoC's have hardware accelerators for
+controlling shared resources. Depending on the board configuration the shared
+resource properties may change. These properties are dynamically probed by the
+remote processor and made available in the shared memory.
+
+The devicetree representation of the command DB driver should be:
+
+PROPERTIES:
+- compatible:
+ Usage: required
+ Value type: <string>
+ Definition: Should be "qcom,cmd-db"
+
+- memory-region:
+ Usage: required
+ Value type: <phandle>
+ Definition: The phandle to the reserved memory region.
+
+Example:
+
+ reserved-memory {
+ [...]
+ cmd_db_mem: qcom,cmd-db@c3f000c {
+ reg = <0x0 0xc3f000c 0x0 0x8>;
+ };
+ };
+
+ qcom,cmd-db@c3f000c {
+ compatible = "qcom,cmd-db";
+ memory-region = <&cmd_db_mem>;
+ };
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next parent reply other threads:[~2018-02-08 19:51 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20180208195154.3580-1-ilina@codeaurora.org>
2018-02-08 19:51 ` Lina Iyer [this message]
[not found] ` <20180208195154.3580-3-ilina-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
2018-02-14 19:34 ` [PATCH v2 2/2] dt-bindings: introduce Command DB for QCOM SoCs Bjorn Andersson
2018-02-15 18:46 ` Lina Iyer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180208195154.3580-3-ilina@codeaurora.org \
--to=ilina@codeaurora.org \
--cc=andy.gross@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=david.brown@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-soc@vger.kernel.org \
--cc=msivasub@codeaurora.org \
--cc=rnayak@codeaurora.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).