From: Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org
Cc: talho-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org,
linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Mikko Perttunen
<mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v3 7/7] arm64: tegra: Add device tree for the Tegra194 P2972-0000 board
Date: Thu, 15 Feb 2018 16:52:06 +0200 [thread overview]
Message-ID: <20180215145206.24775-8-mperttunen@nvidia.com> (raw)
In-Reply-To: <20180215145206.24775-1-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Add device tree files for the Tegra194 P2972-0000 development board.
The board consists of the P2888 compute module and the P2822 baseboard.
Signed-off-by: Mikko Perttunen <mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm64/boot/dts/nvidia/Makefile | 1 +
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 248 +++++++++++++++++++++
arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts | 16 ++
3 files changed, 265 insertions(+)
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
create mode 100644 arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
diff --git a/arch/arm64/boot/dts/nvidia/Makefile b/arch/arm64/boot/dts/nvidia/Makefile
index 676aa2f238d1..7c13d7df484e 100644
--- a/arch/arm64/boot/dts/nvidia/Makefile
+++ b/arch/arm64/boot/dts/nvidia/Makefile
@@ -5,3 +5,4 @@ dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2371-2180.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-p2571.dtb
dtb-$(CONFIG_ARCH_TEGRA_210_SOC) += tegra210-smaug.dtb
dtb-$(CONFIG_ARCH_TEGRA_186_SOC) += tegra186-p2771-0000.dtb
+dtb-$(CONFIG_ARCH_TEGRA_194_SOC) += tegra194-p2972-0000.dtb
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
new file mode 100644
index 000000000000..ecb034177fc2
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "tegra194.dtsi"
+
+#include <dt-bindings/mfd/max77620.h>
+
+/ {
+ model = "NVIDIA Tegra194 P2888 Processor Module";
+ compatible = "nvidia,p2888", "nvidia,tegra194";
+
+ aliases {
+ sdhci0 = "/cbb/sdhci@3460000";
+ sdhci1 = "/cbb/sdhci@3400000";
+ serial0 = &uartb;
+ i2c0 = "/bpmp/i2c";
+ i2c1 = "/cbb/i2c@3160000";
+ i2c2 = "/cbb/i2c@c240000";
+ i2c3 = "/cbb/i2c@3180000";
+ i2c4 = "/cbb/i2c@3190000";
+ i2c5 = "/cbb/i2c@31c0000";
+ i2c6 = "/cbb/i2c@c250000";
+ i2c7 = "/cbb/i2c@31e0000";
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ stdout-path = "serial0:115200n8";
+ };
+
+ cbb {
+ serial@3110000 {
+ status = "okay";
+ };
+
+ /* SDMMC1 (SD/MMC) */
+ sdhci@3400000 {
+/*
+ cd-gpios = <&gpio TEGRA194_MAIN_GPIO(A, 0) GPIO_ACTIVE_LOW>;
+*/
+ };
+
+ /* SDMMC4 (eMMC) */
+ sdhci@3460000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+
+ vqmmc-supply = <&vdd_1v8ls>;
+ vmmc-supply = <&vdd_emmc_3v3>;
+ };
+
+ pmc@c360000 {
+ nvidia,invert-interrupt;
+ };
+ };
+
+ bpmp {
+ i2c {
+ status = "okay";
+
+ pmic: pmic@3c {
+ compatible = "maxim,max20024";
+ reg = <0x3c>;
+
+ interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ #gpio-cells = <2>;
+ gpio-controller;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&max20024_default>;
+
+ max20024_default: pinmux {
+ gpio0 {
+ pins = "gpio0";
+ function = "gpio";
+ };
+
+ gpio1 {
+ pins = "gpio1";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+ };
+
+ gpio2 {
+ pins = "gpio2";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+ };
+
+ gpio3 {
+ pins = "gpio3";
+ function = "fps-out";
+ maxim,active-fps-source = <MAX77620_FPS_SRC_DEF>;
+ };
+
+ gpio4 {
+ pins = "gpio4";
+ function = "32k-out1";
+ drive-push-pull = <1>;
+ };
+
+ gpio6 {
+ pins = "gpio6";
+ function = "gpio";
+ drive-push-pull = <1>;
+ };
+
+ gpio7 {
+ pins = "gpio7";
+ function = "gpio";
+ drive-push-pull = <0>;
+ };
+ };
+
+ fps {
+ fps0 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+
+ fps1 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ maxim,device-state-on-disabled-event = <MAX77620_FPS_INACTIVE_STATE_SLEEP>;
+ };
+
+ fps2 {
+ maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>;
+ maxim,shutdown-fps-time-period-us = <640>;
+ };
+ };
+
+ regulators {
+ in-sd0-supply = <&vdd_5v0_sys>;
+ in-sd1-supply = <&vdd_5v0_sys>;
+ in-sd2-supply = <&vdd_5v0_sys>;
+ in-sd3-supply = <&vdd_5v0_sys>;
+ in-sd4-supply = <&vdd_5v0_sys>;
+
+ in-ldo0-1-supply = <&vdd_5v0_sys>;
+ in-ldo2-supply = <&vdd_5v0_sys>;
+ in-ldo3-5-supply = <&vdd_5v0_sys>;
+ in-ldo4-6-supply = <&vdd_5v0_sys>;
+ in-ldo7-8-supply = <&vdd_1v8ls>;
+
+ sd0 {
+ regulator-name = "VDD_1V0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd1 {
+ regulator-name = "VDD_1V8HS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_1v8ls: sd2 {
+ regulator-name = "VDD_1V8LS";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd3 {
+ regulator-name = "VDD_1V8AO";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ sd4 {
+ regulator-name = "VDD_DDR_1V1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo0 {
+ regulator-name = "VDD_RTC";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo2 {
+ regulator-name = "VDD_AO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ vdd_emmc_3v3: ldo3 {
+ regulator-name = "VDD_EMMC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo5 {
+ regulator-name = "VDD_USB_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo6 {
+ regulator-name = "VDD_SDIO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7 {
+ regulator-name = "VDD_CSI_1V2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+ };
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vdd_5v0_sys: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+
+ regulator-name = "VIN_SYS_5V0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
new file mode 100644
index 000000000000..9ff3c18280c4
--- /dev/null
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -0,0 +1,16 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra194-p2888.dtsi"
+
+/ {
+ model = "NVIDIA Tegra194 P2972-0000 Development Board";
+ compatible = "nvidia,p2972-0000", "nvidia,tegra194";
+
+ cbb {
+ /* SDMMC1 (SD/MMC) */
+ sdhci@3400000 {
+ status = "okay";
+ };
+ };
+};
--
2.16.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2018-02-15 14:52 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-15 14:51 [PATCH v3 0/7] Initial support for NVIDIA Tegra194 Mikko Perttunen
2018-02-15 14:52 ` [PATCH v3 1/7] firmware: tegra: Simplify channel management Mikko Perttunen
2018-02-15 14:52 ` [PATCH v3 2/7] soc/tegra: Add Tegra194 SoC configuration option Mikko Perttunen
2018-02-15 14:52 ` [PATCH v3 3/7] soc/tegra: pmc: Add Tegra194 compatibility string Mikko Perttunen
[not found] ` <20180215145206.24775-1-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2018-02-15 14:52 ` [PATCH v3 4/7] dt-bindings: tegra: Add missing chips and NVIDIA boards Mikko Perttunen
2018-02-15 14:52 ` Mikko Perttunen [this message]
2018-02-15 14:52 ` [PATCH v3 5/7] dt-bindings: tegra: Add documentation for nvidia,tegra194-pmc Mikko Perttunen
2018-02-15 14:52 ` [PATCH v3 6/7] arm64: tegra: Add Tegra194 chip device tree Mikko Perttunen
[not found] ` <20180215145206.24775-7-mperttunen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2018-02-16 12:33 ` Philippe Ombredanne
2018-02-19 9:32 ` Mikko Perttunen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180215145206.24775-8-mperttunen@nvidia.com \
--to=mperttunen-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jonathanh-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=talho-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).