From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-wm0-f65.google.com ([74.125.82.65]:51066 "EHLO mail-wm0-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753189AbeBVKYS (ORCPT ); Thu, 22 Feb 2018 05:24:18 -0500 From: Rui Miguel Silva Subject: [PATCH 1/2] media: ov2680: dt: Add bindings for OV2680 Date: Thu, 22 Feb 2018 10:23:37 +0000 Message-Id: <20180222102338.28896-2-rui.silva@linaro.org> In-Reply-To: <20180222102338.28896-1-rui.silva@linaro.org> References: <20180222102338.28896-1-rui.silva@linaro.org> Sender: devicetree-owner@vger.kernel.org To: mchehab@kernel.org, sakari.ailus@linux.intel.com, hverkuil@xs4all.nl Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, Ryan Harkin , Rui Miguel Silva , devicetree@vger.kernel.org List-ID: Add device tree binding documentation for the OV5640 camera sensor. CC: devicetree@vger.kernel.org Signed-off-by: Rui Miguel Silva --- .../devicetree/bindings/media/i2c/ov2680.txt | 34 ++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov2680.txt diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt new file mode 100644 index 000000000000..f9dc63ce5044 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov2680.txt @@ -0,0 +1,34 @@ +* Omnivision OV2680 MIPI CSI-2 sensor + +Required Properties: +- compatible: should be "ovti,ov2680" +- clocks: reference to the xvclk input clock. +- clock-names: should be "xvclk". + +Optional Properties: +- powerdown-gpios: reference to the GPIO connected to the powerdown pin, + if any. This is an active high signal to the OV2680. + +The device node must contain one 'port' child node for its digital output +video port, in accordance with the video interface bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + +&i2c2 { + ov2680: camera-sensor@36 { + compatible = "ovti,ov2680"; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + powerdown-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + + port { + ov2680_mipi_ep: endpoint { + remote-endpoint = <&mipi_sensor_ep>; + clock-lanes = <0>; + data-lanes = <1>; + }; + }; + }; +}; -- 2.16.2