Re: [PATCH v4 5/6] arm: dts: pxa: use reworked NAND controller driver

[Boris Brezillon <boris.brezillon@bootlin.com>]

+Arnd and the LAKML

Hi Miquel,

Please try to Cc the LAKML and the arm-soc maintainers when you send DT
changes.

Arnd, Robert, I'd like to apply this patch through the MTD tree since
it depends on patch 1 of this series ("mtd: nand: use Marvell reworked
NAND controller driver with all platforms").
Otherwise, I can leave it to Robert for 4.18.

Let me know what you prefer.

Thanks,

Boris

On Mon, 19 Feb 2018 23:35:56 +0100
Miquel Raynal <miquel.raynal@bootlin.com> wrote:

> Use the new bindings of the reworked Marvell NAND controller driver.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
> ---
>  arch/arm/boot/dts/pxa3xx.dtsi | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
> index 55c75b67351c..982d1a62661d 100644
> --- a/arch/arm/boot/dts/pxa3xx.dtsi
> +++ b/arch/arm/boot/dts/pxa3xx.dtsi
> @@ -117,15 +117,15 @@
>  			status = "disabled";
>  		};
>  
> -		nand0: nand@43100000 {
> -			compatible = "marvell,pxa3xx-nand";
> +		nand_controller: nand-controller@43100000 {
> +			compatible = "marvell,pxa3xx-nand-controller";
>  			reg = <0x43100000 90>;
>  			interrupts = <45>;
>  			clocks = <&clks CLK_NAND>;
>  			dmas = <&pdma 97 3>;
>  			dma-names = "data";
>  			#address-cells = <1>;
> -			#size-cells = <1>;	
> +			#size-cells = <0>;
>  			status = "disabled";
>  		};
>  



-- 
Boris Brezillon, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/