devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
To: Maxime Ripard
	<maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Linus Walleij
	<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
	Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Subject: [PATCH v3 7/7] arm64: allwinner: h6: add support for Pine H64 board
Date: Fri, 23 Feb 2018 20:35:55 +0800	[thread overview]
Message-ID: <20180223123555.64009-8-icenowy@aosc.io> (raw)
In-Reply-To: <20180223123555.64009-6-icenowy-h8G6r0blFSE@public.gmane.org>

Pine H64 is an Allwinner H6-based SBC from Pine64, with the following
features:

- 1GiB/2GiB/4GiB LPDDR3 DRAM (in 4GiB situation only 3GiB is
accessible)
- AXP805 PMIC
- Raspberry-Pi-compatible GPIO header, "Euler" GPIO header (not
compatible with the "Euler" on Pine A64) and "Expansion" pin header
- 2 USB 2.0 ports and 1 USB 3.0 ports
- Audio jack
- MicroSD slot and eMMC module slot
- on-board SPI NOR flash
- 1Gbps Ethernet port (via RTL8211E PHY)
- HDMI port

Adds initial support for it, including the UART on the Expansion pin
header.

Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
Reviewed-by: Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>
Tested-by: Andre Przywara <andre.przywara-5wv7dgnIgG8@public.gmane.org>
---
Changes in v3:
- SPDX license identifier fix.
- Add Andre's Reviewed-by/Tested-by tags.

Changes in v2:
- Switch to SPDX license identifier.

 arch/arm64/boot/dts/allwinner/Makefile             |  1 +
 .../boot/dts/allwinner/sun50i-h6-pine-h64.dts      | 29 ++++++++++++++++++++++
 2 files changed, 30 insertions(+)
 create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts

diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index f505227b0250..addf245226f6 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -10,3 +10,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-prime.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-zero-plus2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo2.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-nanopi-neo-plus2.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
new file mode 100644
index 000000000000..d36de5eb81f3
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (c) 2017 Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "Pine H64";
+	compatible = "pine64,pine-h64", "allwinner,sun50i-h6";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
-- 
2.15.1

  parent reply	other threads:[~2018-02-23 12:35 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-23 12:35 [PATCH v3 5/7] clk: sunxi-ng: add support for the Allwinner H6 CCU Icenowy Zheng
     [not found] ` <20180223123555.64009-6-icenowy-h8G6r0blFSE@public.gmane.org>
2018-02-23 12:35   ` [PATCH v3 6/7] arm64: allwinner: h6: add the basical Allwinner H6 DTSI file Icenowy Zheng
2018-02-23 15:20     ` Maxime Ripard
     [not found]       ` <20180223152038.2bflylwa6vj4gzfj-ZC1Zs529Oq4@public.gmane.org>
2018-02-23 15:22         ` Icenowy Zheng
2018-02-26  9:26           ` Maxime Ripard
     [not found]             ` <20180226092645.xghkmfowenzlbm42-ZC1Zs529Oq4@public.gmane.org>
2018-02-26 15:54               ` Samuel Holland
     [not found]                 ` <b9bc5944-b9e3-91d7-8012-c87a2b2d17fa-RkNLwX/CsU9g9hUCZPvPmw@public.gmane.org>
2018-02-28 11:08                   ` Andre Przywara
2018-02-23 12:35   ` Icenowy Zheng [this message]
2018-03-01  9:29 ` [PATCH v3 5/7] clk: sunxi-ng: add support for the Allwinner H6 CCU Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180223123555.64009-8-icenowy@aosc.io \
    --to=icenowy-h8g6r0blfse@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-clk-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
    --cc=maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org \
    --cc=wens-jdAy2FN1RRM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).