From: Shawn Guo <shawnguo@kernel.org>
To: Stefan Agner <stefan@agner.ch>
Cc: fabio.estevam@nxp.com, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de
Subject: Re: [PATCH] ARM: dts: imx7s: add spba-bus abstraction
Date: Wed, 28 Feb 2018 15:00:15 +0800 [thread overview]
Message-ID: <20180228070014.GL3217@dragon> (raw)
In-Reply-To: <20180227163049.18809-1-stefan@agner.ch>
On Tue, Feb 27, 2018 at 05:30:49PM +0100, Stefan Agner wrote:
> According to the i.MX 7Solo/Dual Application Processor Reference
> Manual the ECSPI1/2/3, UART1/2/3 and SAI1/2/3 peripherals are
> connected through the SPBA bus. Other similar SoCs such as i.MX 6UL
> add this bus abstraction. This adds the bus also to the i.MX 7
> device tree.
>
> The i.MX SDMA driver uses this abstraction to configure watermark
> levels slightly differently, so this might change behavior slightly.
> There have no issues been observed before or after the patch.
>
> Signed-off-by: Stefan Agner <stefan@agner.ch>
Applied, thanks.
prev parent reply other threads:[~2018-02-28 7:00 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-27 16:30 [PATCH] ARM: dts: imx7s: add spba-bus abstraction Stefan Agner
2018-02-28 7:00 ` Shawn Guo [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180228070014.GL3217@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=fabio.estevam@nxp.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=stefan@agner.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).