From mboxrd@z Thu Jan 1 00:00:00 1970 From: Russell King - ARM Linux Subject: Re: [PATCH 2/2] ARM: dts: armada388-clearfog: add SFP module support Date: Sun, 4 Mar 2018 12:49:06 +0000 Message-ID: <20180304124905.GF9418@n2100.armlinux.org.uk> References: <20180227160135.GU9418@n2100.armlinux.org.uk> <20180304121324.ut3d3i2vpdopae7o@sapphire.tkos.co.il> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20180304121324.ut3d3i2vpdopae7o@sapphire.tkos.co.il> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Baruch Siach Cc: Mark Rutland , Andrew Lunn , Jason Cooper , devicetree@vger.kernel.org, Rob Herring , Gregory Clement , linux-arm-kernel@lists.infradead.org, Sebastian Hesselbarth List-Id: devicetree@vger.kernel.org On Sun, Mar 04, 2018 at 02:13:24PM +0200, Baruch Siach wrote: > Hi Russell, > > On Tue, Feb 27, 2018 at 04:02:02PM +0000, Russell King wrote: > > Add SFP module support for Clearfog using the SFP phylink support. > > > > Signed-off-by: Russell King > > Tested-by: Baruch Siach > > Tested on Clearfog base with kernel version 4.16-rc3. The SFP module is 1G > copper Linktel LX1801CNR. Thanks for testing. Please also send the "ethtool -m eth2 raw on > foo.bin" output as well so I can build a database of module EEPROMs, which allows me to validate the SFP parsing code against. Alternatively, please send the "hex on" if you think that's more convenient. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up According to speedtest.net: 8.21Mbps down 510kbps up