From: Alexander Monakov <amonakov@ispras.ru>
To: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>,
devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Alexander Monakov <amonakov@ispras.ru>
Subject: [PATCH 1/2] regulator: 88pg86x: add DT bindings document
Date: Fri, 9 Mar 2018 01:53:02 +0300 [thread overview]
Message-ID: <20180308225303.329-1-amonakov@ispras.ru> (raw)
The only device-specific node names are "buck1" and "buck2" for the two
regulators present on the device. Sleep mode GPIO and per-regulator GPIO
enable pins are not exposed (the driver does not support them either).
Signed-off-by: Alexander Monakov <amonakov@ispras.ru>
---
.../devicetree/bindings/regulator/88pg86x.txt | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
create mode 100644 Documentation/devicetree/bindings/regulator/88pg86x.txt
diff --git a/Documentation/devicetree/bindings/regulator/88pg86x.txt b/Documentation/devicetree/bindings/regulator/88pg86x.txt
new file mode 100644
index 000000000000..13b7f49a2ea8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/88pg86x.txt
@@ -0,0 +1,22 @@
+Marvell 88PG867/88PG868 voltage regulators
+
+Required properties:
+- compatible: one of "marvell,88pg867", "marvell,88pg868";
+- reg: I2C slave address.
+
+Optional subnodes for regulators: "buck1", "buck2", using common regulator
+bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Example:
+
+ pg868@19 {
+ compatible = "marvell,88pg868";
+ reg = <0x19>;
+
+ vcpu: buck1 {
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1350000>;
+ };
+ };
--
2.11.0
next reply other threads:[~2018-03-08 22:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-08 22:53 Alexander Monakov [this message]
2018-03-08 22:53 ` [PATCH 2/2] regulator: 88pg86x: new i2c dual regulator chip Alexander Monakov
2018-03-09 18:04 ` Applied "regulator: 88pg86x: new i2c dual regulator chip" to the regulator tree Mark Brown
2018-03-09 18:04 ` Applied "regulator: 88pg86x: add DT bindings document" " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180308225303.329-1-amonakov@ispras.ru \
--to=amonakov@ispras.ru \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox