From: Chen-Yu Tsai <wens@csie.org>
To: Maxime Ripard <maxime.ripard@bootlin.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
David Airlie <airlied@linux.ie>
Cc: Chen-Yu Tsai <wens@csie.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: [PATCH 6/8] ARM: dts: sun9i: Add device nodes for documented display pipelines for A80
Date: Thu, 15 Mar 2018 19:41:34 +0800 [thread overview]
Message-ID: <20180315114136.24747-7-wens@csie.org> (raw)
In-Reply-To: <20180315114136.24747-1-wens@csie.org>
The Allwinner A80 SoC has 3 display pipelines, of which some parts are
documented:
- 3x display front ends (FE), documented
- 2x display enhancement units (DEU), undocumented
- 3x display back ends (BE), documented
- 2x dynamic range controller (DRC), undocumented
- 2x LCDC/TCONs, documented
- 1x LCDC/TCON, undocumented, and probably not useable
- 1x HDMI transmitter, undocumented but DesignWare compatible
- 1x MERGE block, function unknown
This patch adds device nodes for the first 2 documented pipelines:
FE0 - DEU0 - - BE0 - DRC0 - TCON0
x
FE1 - DEU1 - - BE1 - DRC1 - TCON1
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
arch/arm/boot/dts/sun9i-a80.dtsi | 381 +++++++++++++++++++++++++++++++++++++++
1 file changed, 381 insertions(+)
diff --git a/arch/arm/boot/dts/sun9i-a80.dtsi b/arch/arm/boot/dts/sun9i-a80.dtsi
index 82a770a5ba46..6fdb4eaa2e04 100644
--- a/arch/arm/boot/dts/sun9i-a80.dtsi
+++ b/arch/arm/boot/dts/sun9i-a80.dtsi
@@ -248,6 +248,12 @@
};
};
+ de: display-engine {
+ compatible = "allwinner,sun9i-a80-display-engine";
+ allwinner,pipelines = <&fe0>, <&fe1>;
+ status = "disabled";
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <1>;
@@ -523,6 +529,381 @@
#reset-cells = <1>;
};
+ fe0: display-frontend@3100000 {
+ compatible = "allwinner,sun9i-a80-display-frontend";
+ reg = <0x03100000 0x40000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&de_clocks CLK_BUS_FE0>, <&de_clocks CLK_FE0>,
+ <&de_clocks CLK_DRAM_FE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&de_clocks RST_FE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe0_out_deu0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&deu0_in_fe0>;
+ };
+ };
+ };
+ };
+
+ fe1: display-frontend@3140000 {
+ compatible = "allwinner,sun9i-a80-display-frontend";
+ reg = <0x03140000 0x40000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&de_clocks CLK_BUS_FE1>, <&de_clocks CLK_FE1>,
+ <&de_clocks CLK_DRAM_FE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&de_clocks RST_FE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ fe1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ fe1_out_deu1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&deu1_in_fe1>;
+ };
+ };
+ };
+ };
+
+ be0: display-backend@3200000 {
+ compatible = "allwinner,sun9i-a80-display-backend";
+ reg = <0x03200000 0x40000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&de_clocks CLK_BUS_BE0>, <&de_clocks CLK_BE0>,
+ <&de_clocks CLK_DRAM_BE0>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&de_clocks RST_BE0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be0_in_deu0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&deu0_out_be0>;
+ };
+
+ be0_in_deu1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&deu1_out_be0>;
+ };
+ };
+
+ be0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be0_out_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_in_be0>;
+ };
+ };
+ };
+ };
+
+ be1: display-backend@3240000 {
+ compatible = "allwinner,sun9i-a80-display-backend";
+ reg = <0x03240000 0x40000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&de_clocks CLK_BUS_BE1>, <&de_clocks CLK_BE1>,
+ <&de_clocks CLK_DRAM_BE1>;
+ clock-names = "ahb", "mod",
+ "ram";
+ resets = <&de_clocks RST_BE1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ be1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ be1_in_deu0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&deu0_out_be1>;
+ };
+
+ be1_in_deu1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&deu1_out_be1>;
+ };
+ };
+
+ be1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ be1_out_drc1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc1_in_be1>;
+ };
+ };
+ };
+ };
+
+ deu0: deu@3300000 {
+ compatible = "allwinner,sun9i-a80-deu";
+ reg = <0x03300000 0x40000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&de_clocks CLK_BUS_DEU0>,
+ <&de_clocks CLK_IEP_DEU0>,
+ <&de_clocks CLK_DRAM_DEU0>;
+ clock-names = "ahb",
+ "mod",
+ "ram";
+ resets = <&de_clocks RST_DEU0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ deu0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ deu0_in_fe0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe0_out_deu0>;
+ };
+ };
+
+ deu0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ deu0_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_deu0>;
+ };
+
+ deu0_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_deu0>;
+ };
+ };
+ };
+ };
+
+ deu1: deu@3340000 {
+ compatible = "allwinner,sun9i-a80-deu";
+ reg = <0x03340000 0x40000>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&de_clocks CLK_BUS_DEU1>,
+ <&de_clocks CLK_IEP_DEU1>,
+ <&de_clocks CLK_DRAM_DEU1>;
+ clock-names = "ahb",
+ "mod",
+ "ram";
+ resets = <&de_clocks RST_DEU1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ deu1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ deu1_in_fe1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&fe1_out_deu1>;
+ };
+ };
+
+ deu1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ deu1_out_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_in_deu1>;
+ };
+
+ deu1_out_be1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&be1_in_deu1>;
+ };
+ };
+ };
+ };
+
+ drc0: drc@3400000 {
+ compatible = "allwinner,sun9i-a80-drc";
+ reg = <0x03400000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&de_clocks CLK_BUS_DRC0>,
+ <&de_clocks CLK_IEP_DRC0>,
+ <&de_clocks CLK_DRAM_DRC0>;
+ clock-names = "ahb",
+ "mod",
+ "ram";
+ resets = <&de_clocks RST_DRC0>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ drc0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ drc0_in_be0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be0_out_drc0>;
+ };
+ };
+
+ drc0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ drc0_out_tcon0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon0_in_drc0>;
+ };
+ };
+ };
+ };
+
+ drc1: drc@3440000 {
+ compatible = "allwinner,sun9i-a80-drc";
+ reg = <0x03440000 0x40000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&de_clocks CLK_BUS_DRC1>,
+ <&de_clocks CLK_IEP_DRC1>,
+ <&de_clocks CLK_DRAM_DRC1>;
+ clock-names = "ahb",
+ "mod",
+ "ram";
+ resets = <&de_clocks RST_DRC1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ drc1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ drc1_in_be1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&be1_out_drc1>;
+ };
+ };
+
+ drc1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+
+ drc1_out_tcon1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&tcon1_in_drc1>;
+ };
+ };
+ };
+ };
+
+ tcon0: lcd-controller@3c00000 {
+ compatible = "allwinner,sun9i-a80-tcon-lcd";
+ reg = <0x03c00000 0x10000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_LCD0>, <&ccu CLK_LCD0>;
+ clock-names = "ahb", "tcon-ch0";
+ resets = <&ccu RST_BUS_LCD0>, <&ccu RST_BUS_EDP>;
+ reset-names = "lcd", "edp";
+ clock-output-names = "tcon0-pixel-clock";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon0_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon0_in_drc0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc0_out_tcon0>;
+ };
+ };
+
+ tcon0_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
+ tcon1: lcd-controller@3c10000 {
+ compatible = "allwinner,sun9i-a80-tcon-tv";
+ reg = <0x03c10000 0x10000>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_LCD1>, <&ccu CLK_LCD1>;
+ clock-names = "ahb", "tcon-ch1";
+ resets = <&ccu RST_BUS_LCD1>, <&ccu RST_BUS_EDP>;
+ reset-names = "lcd", "edp";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tcon1_in: port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ tcon1_in_drc1: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&drc1_out_tcon1>;
+ };
+ };
+
+ tcon1_out: port@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+ };
+ };
+
ccu: clock@6000000 {
compatible = "allwinner,sun9i-a80-ccu";
reg = <0x06000000 0x800>;
--
2.16.2
next prev parent reply other threads:[~2018-03-15 11:41 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-15 11:41 [PATCH 0/8] ARM: sun9i: a80: Add display support Chen-Yu Tsai
2018-03-15 11:41 ` [PATCH 1/8] drm/sun4i: Add compatible strings for A80 TCONs Chen-Yu Tsai
2018-03-18 12:52 ` Rob Herring
2018-03-15 11:41 ` [PATCH 2/8] drm/sun4i: Add DT binding for Detail Enhancement Unit in Allwinner A80 SoC Chen-Yu Tsai
2018-03-18 12:52 ` Rob Herring
2018-03-15 11:41 ` [PATCH 3/8] drm/sun4i: Add support for A80 TCONs Chen-Yu Tsai
2018-03-15 11:41 ` [PATCH 4/8] drm/sun4i: Add compatible strings for the A80 display pipeline Chen-Yu Tsai
2018-03-18 12:52 ` Rob Herring
2018-03-15 11:41 ` [PATCH 5/8] drm/sun4i: Add driver support for " Chen-Yu Tsai
2018-03-15 11:41 ` Chen-Yu Tsai [this message]
2018-03-15 11:41 ` [PATCH 7/8] ARM: dts: sun9i: Add pinmux settings for LCD0 RGB888 output Chen-Yu Tsai
2018-03-15 11:41 ` [PATCH 8/8] ARM: dts: sun9i: cubieboard4: Enable VGA display output Chen-Yu Tsai
2018-03-19 21:13 ` [PATCH 0/8] ARM: sun9i: a80: Add display support Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180315114136.24747-7-wens@csie.org \
--to=wens@csie.org \
--cc=airlied@linux.ie \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).