* Re: [PATCH 2/2] dt-bindings: usb: rt1711h device tree binding document [not found] ` <1521431375-23207-3-git-send-email-leechu729@gmail.com> @ 2018-03-19 16:29 ` Guenter Roeck 2018-03-20 8:53 ` 李書帆 0 siblings, 1 reply; 2+ messages in thread From: Guenter Roeck @ 2018-03-19 16:29 UTC (permalink / raw) To: ShuFan Lee Cc: greg, heikki.krogerus, shufan_lee, cy_huang, jun.li, mats.dev.list, linux-kernel, linux-usb, robh+dt, devicetree On Mon, Mar 19, 2018 at 11:49:35AM +0800, ShuFan Lee wrote: > From: ShuFan Lee <shufan_lee@richtek.com> > > Add device tree binding document for Richtek RT1711H Type-C chip driver Cc: Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org is missing. Added here but it might make sense to resend. > > Signed-off-by: ShuFan Lee <shufan_lee@richtek.com> > --- > .../devicetree/bindings/usb/richtek,rt1711h.txt | 30 ++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.txt > > changelogs between v2 & v3 > - add dt-bindings document for rt1711h typec chip driver > > diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt > new file mode 100644 > index 000000000000..7da4dac78ea7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt > @@ -0,0 +1,30 @@ > +Richtek RT1711H TypeC PD Controller. > + > +Required properties: > + - compatible : Must be "richtek,rt1711h". > + - reg : Must be 0x4e, it's slave address of RT1711H. > + > +Recommended properties : > + - interrupt-parent : the phandle for the interrupt controller that > + provides interrupts for this device. > + - interrupts : <a b> where a is the interrupt number and b represents an > + encoding of the sense and level information for the interrupt. > + > +Optional properties : > + - rt,intr-gpios : IRQ GPIO pin that's connected to RT1711H interrupt. > + if interrupt-parent & interrupts are not defined, use this property instead. > + > +Example : > +rt1711h@4e { > + compatible = "richtek,rt1711h"; > + reg = <0x4e>; > + interrupt-parent = <&gpio26>; > + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; > +}; > + > +Example using rt,intr-gpios : > +rt1711h@4e { > + compatible = "richtek,rt1711h"; > + reg = <0x4e>; > + rt,intr-gpios = <&gpio26 0 0x0>; > +}; > -- > 1.9.1 > ^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH 2/2] dt-bindings: usb: rt1711h device tree binding document 2018-03-19 16:29 ` [PATCH 2/2] dt-bindings: usb: rt1711h device tree binding document Guenter Roeck @ 2018-03-20 8:53 ` 李書帆 0 siblings, 0 replies; 2+ messages in thread From: 李書帆 @ 2018-03-20 8:53 UTC (permalink / raw) To: Guenter Roeck Cc: Greg KH, Heikki Krogerus, shufan_lee(李書帆), cy_huang(黃啟原), Jun Li, Mats Karrman, linux-kernel, linux-usb, robh+dt, devicetree Hi Guenter, 2018-03-20 0:29 GMT+08:00 Guenter Roeck <linux@roeck-us.net>: > On Mon, Mar 19, 2018 at 11:49:35AM +0800, ShuFan Lee wrote: >> From: ShuFan Lee <shufan_lee@richtek.com> >> >> Add device tree binding document for Richtek RT1711H Type-C chip driver > > Cc: Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org > is missing. Added here but it might make sense to resend. Thank you for reminding, I'll resend it. > >> >> Signed-off-by: ShuFan Lee <shufan_lee@richtek.com> >> --- >> .../devicetree/bindings/usb/richtek,rt1711h.txt | 30 ++++++++++++++++++++++ >> 1 file changed, 30 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.txt >> >> changelogs between v2 & v3 >> - add dt-bindings document for rt1711h typec chip driver >> >> diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt >> new file mode 100644 >> index 000000000000..7da4dac78ea7 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.txt >> @@ -0,0 +1,30 @@ >> +Richtek RT1711H TypeC PD Controller. >> + >> +Required properties: >> + - compatible : Must be "richtek,rt1711h". >> + - reg : Must be 0x4e, it's slave address of RT1711H. >> + >> +Recommended properties : >> + - interrupt-parent : the phandle for the interrupt controller that >> + provides interrupts for this device. >> + - interrupts : <a b> where a is the interrupt number and b represents an >> + encoding of the sense and level information for the interrupt. >> + >> +Optional properties : >> + - rt,intr-gpios : IRQ GPIO pin that's connected to RT1711H interrupt. >> + if interrupt-parent & interrupts are not defined, use this property instead. >> + >> +Example : >> +rt1711h@4e { >> + compatible = "richtek,rt1711h"; >> + reg = <0x4e>; >> + interrupt-parent = <&gpio26>; >> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; >> +}; >> + >> +Example using rt,intr-gpios : >> +rt1711h@4e { >> + compatible = "richtek,rt1711h"; >> + reg = <0x4e>; >> + rt,intr-gpios = <&gpio26 0 0x0>; >> +}; >> -- >> 1.9.1 >> -- Best Regards, 書帆 ^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-03-20 8:53 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1521431375-23207-1-git-send-email-leechu729@gmail.com>
[not found] ` <1521431375-23207-3-git-send-email-leechu729@gmail.com>
2018-03-19 16:29 ` [PATCH 2/2] dt-bindings: usb: rt1711h device tree binding document Guenter Roeck
2018-03-20 8:53 ` 李書帆
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).