From mboxrd@z Thu Jan 1 00:00:00 1970 From: Matt Porter Subject: [PATCH v2] arm: dts: hummingboard: convert onboard audio to simple-audio-card Date: Mon, 19 Mar 2018 16:14:13 -0400 Message-ID: <20180319201414.29481-1-mporter@konsulko.com> Return-path: Sender: linux-kernel-owner@vger.kernel.org To: Shawn Guo , Sascha Hauer , Fabio Estevam , Rob Herring , Mark Rutland , Russell King , "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" , "open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" , open list List-Id: devicetree@vger.kernel.org The HB onboard audio currently makes use of the imx-audio-sgtl5000 binding. This binding does not support auxiliary audio devices such as external amplifiers. The simple-audio-card binding does support this property which allows systems incorporating the HB to add an auxiliary device that's attached to the HB audio jack with an overlay. Convert the HB onboard audio to use simple-audio-card for this additional flexibility. Signed-off-by: Matt Porter Reviewed-by: Fabio Estevam --- v2: - also convert HB1 to simple-audio-card - retain original card name as "On-board Codec" [case change] arch/arm/boot/dts/imx6qdl-hummingboard.dtsi | 52 ++++++++++++++++++++++------ arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi | 48 ++++++++++++++++++++----- 2 files changed, 82 insertions(+), 18 deletions(-) diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 92583238ca4a..2f6e51fbd4bc 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -38,6 +38,7 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include / { chosen { @@ -105,17 +106,27 @@ vin-supply = <&v_5v0>; }; - sound-sgtl5000 { - audio-codec = <&sgtl5000>; - audio-routing = - "MIC_IN", "Mic Jack", - "Mic Jack", "Mic Bias", + audio: sound-sgtl5000 { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board Codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = + "Microphone", "Headphone Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Headphone Jack", + "Headphone Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - compatible = "fsl,imx-audio-sgtl5000"; - model = "On-board Codec"; - mux-ext-port = <5>; - mux-int-port = <1>; - ssi-controller = <&ssi1>; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; sound-spdif { @@ -129,6 +140,26 @@ &audmux { status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCSEL(4) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; }; &can1 { @@ -161,6 +192,7 @@ compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; + #sound-dai-cells = <0>; reg = <0x0a>; VDDA-supply = <&v_3v2>; VDDIO-supply = <&v_3v2>; diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi index dffbc92e0023..47d780fafd87 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard2.dtsi @@ -38,6 +38,7 @@ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ +#include / { chosen { @@ -145,22 +146,52 @@ vin-supply = <&v_5v0>; }; - sound-sgtl5000 { - audio-codec = <&sgtl5000>; - audio-routing = + audio: sound-sgtl5000 { + compatible = "simple-audio-card"; + simple-audio-card,name = "On-board Codec"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&sound_codec>; + simple-audio-card,frame-master = <&sound_codec>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = "MIC_IN", "Mic Jack", "Mic Jack", "Mic Bias", "Headphone Jack", "HP_OUT"; - compatible = "fsl,imx-audio-sgtl5000"; - model = "On-board Codec"; - mux-ext-port = <5>; - mux-int-port = <1>; - ssi-controller = <&ssi1>; + + sound_cpu: simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + sound_codec: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + }; }; }; &audmux { status = "okay"; + + ssi1 { + fsl,audmux-port = <0>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_SYN | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCSEL(4) | + IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TCLKDIR) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + IMX_AUDMUX_V2_PTCR_SYN + IMX_AUDMUX_V2_PDCR_RXDSEL(0) + >; + }; }; &ecspi2 { @@ -193,6 +224,7 @@ compatible = "fsl,sgtl5000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hummingboard2_sgtl5000>; + #sound-dai-cells = <0>; reg = <0x0a>; VDDA-supply = <&v_3v2>; VDDD-supply = <&vcc_1p8>; -- 2.11.0