devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Benoit Parrot <bparrot@ti.com>
To: dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Jyri Sarha <jsarha@ti.com>
Subject: [Patch v2 1/6] drm/omap: Add ability to filter out modes which can't be supported
Date: Mon, 26 Mar 2018 11:21:23 -0500	[thread overview]
Message-ID: <20180326162128.8740-2-bparrot@ti.com> (raw)
In-Reply-To: <20180326162128.8740-1-bparrot@ti.com>

Currently available display mode from a connector are filtered out
based only on pixel clock capability. However we also need to filter
out wider mode if we cannot handle them based on available pipeline
capabilities.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 drivers/gpu/drm/omapdrm/dss/dispc.c      | 27 +++++++++++++++++++++++++++
 drivers/gpu/drm/omapdrm/dss/omapdss.h    |  1 +
 drivers/gpu/drm/omapdrm/omap_connector.c | 10 ++++++++++
 3 files changed, 38 insertions(+)

diff --git a/drivers/gpu/drm/omapdrm/dss/dispc.c b/drivers/gpu/drm/omapdrm/dss/dispc.c
index 624dee22f46b..35541d4441df 100644
--- a/drivers/gpu/drm/omapdrm/dss/dispc.c
+++ b/drivers/gpu/drm/omapdrm/dss/dispc.c
@@ -100,6 +100,8 @@ struct dispc_features {
 	u8 mgr_height_start;
 	u16 mgr_width_max;
 	u16 mgr_height_max;
+	u16 ovl_width_max;
+	u16 ovl_height_max;
 	unsigned long max_lcd_pclk;
 	unsigned long max_tv_pclk;
 	unsigned int max_downscale;
@@ -2465,6 +2467,12 @@ static int dispc_ovl_calc_scaling(unsigned long pclk, unsigned long lclk,
 	return 0;
 }
 
+static void dispc_ovl_get_max_size(u16 *width, u16 *height)
+{
+	*width = dispc.feat->ovl_width_max;
+	*height = dispc.feat->ovl_height_max;
+}
+
 static int dispc_ovl_setup_common(enum omap_plane_id plane,
 		enum omap_overlay_caps caps, u32 paddr, u32 p_uv_addr,
 		u16 screen_width, int pos_x, int pos_y, u16 width, u16 height,
@@ -2500,6 +2508,10 @@ static int dispc_ovl_setup_common(enum omap_plane_id plane,
 	out_width = out_width == 0 ? width : out_width;
 	out_height = out_height == 0 ? height : out_height;
 
+	WARN(out_width > dispc.feat->ovl_width_max,
+	     "Requested OVL width (%d) is larger than can be supported (%d).\n",
+	     out_width, dispc.feat->ovl_width_max);
+
 	if (ilace && height == out_height)
 		fieldmode = true;
 
@@ -4043,6 +4055,8 @@ static const struct dispc_features omap24xx_dispc_feats = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.ovl_width_max		=	2048,
+	.ovl_height_max		=	2048,
 	.max_lcd_pclk		=	66500000,
 	.max_downscale		=	2,
 	/*
@@ -4080,6 +4094,8 @@ static const struct dispc_features omap34xx_rev1_0_dispc_feats = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.ovl_width_max		=	2048,
+	.ovl_height_max		=	2048,
 	.max_lcd_pclk		=	173000000,
 	.max_tv_pclk		=	59000000,
 	.max_downscale		=	4,
@@ -4114,6 +4130,8 @@ static const struct dispc_features omap34xx_rev3_0_dispc_feats = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.ovl_width_max		=	2048,
+	.ovl_height_max		=	2048,
 	.max_lcd_pclk		=	173000000,
 	.max_tv_pclk		=	59000000,
 	.max_downscale		=	4,
@@ -4148,6 +4166,8 @@ static const struct dispc_features omap36xx_dispc_feats = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.ovl_width_max		=	2048,
+	.ovl_height_max		=	2048,
 	.max_lcd_pclk		=	173000000,
 	.max_tv_pclk		=	59000000,
 	.max_downscale		=	4,
@@ -4182,6 +4202,8 @@ static const struct dispc_features am43xx_dispc_feats = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.ovl_width_max		=	2048,
+	.ovl_height_max		=	2048,
 	.max_lcd_pclk		=	173000000,
 	.max_tv_pclk		=	59000000,
 	.max_downscale		=	4,
@@ -4216,6 +4238,8 @@ static const struct dispc_features omap44xx_dispc_feats = {
 	.mgr_height_start	=	26,
 	.mgr_width_max		=	2048,
 	.mgr_height_max		=	2048,
+	.ovl_width_max		=	2048,
+	.ovl_height_max		=	2048,
 	.max_lcd_pclk		=	170000000,
 	.max_tv_pclk		=	185625000,
 	.max_downscale		=	4,
@@ -4255,6 +4279,8 @@ static const struct dispc_features omap54xx_dispc_feats = {
 	.mgr_height_start	=	27,
 	.mgr_width_max		=	4096,
 	.mgr_height_max		=	4096,
+	.ovl_width_max		=	2048,
+	.ovl_height_max		=	4096,
 	.max_lcd_pclk		=	170000000,
 	.max_tv_pclk		=	186000000,
 	.max_downscale		=	4,
@@ -4525,6 +4551,7 @@ static const struct dispc_ops dispc_ops = {
 	.ovl_enable = dispc_ovl_enable,
 	.ovl_setup = dispc_ovl_setup,
 	.ovl_get_color_modes = dispc_ovl_get_color_modes,
+	.ovl_get_max_size = dispc_ovl_get_max_size,
 };
 
 /* DISPC HW IP initialisation */
diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
index f8f83e826a56..c58c75292182 100644
--- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
+++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
@@ -719,6 +719,7 @@ struct dispc_ops {
 			enum omap_channel channel);
 
 	const u32 *(*ovl_get_color_modes)(enum omap_plane_id plane);
+	void (*ovl_get_max_size)(u16 *width, u16 *height);
 };
 
 void dispc_set_ops(const struct dispc_ops *o);
diff --git a/drivers/gpu/drm/omapdrm/omap_connector.c b/drivers/gpu/drm/omapdrm/omap_connector.c
index a0d7b1d905e8..d5e059abb555 100644
--- a/drivers/gpu/drm/omapdrm/omap_connector.c
+++ b/drivers/gpu/drm/omapdrm/omap_connector.c
@@ -197,6 +197,16 @@ static int omap_connector_mode_valid(struct drm_connector *connector,
 			r = 0;
 	}
 
+	/* Check if the advertised width exceed what the pipeline can do */
+	if (!r) {
+		struct omap_drm_private *priv = dev->dev_private;
+		u16 width, height;
+
+		priv->dispc_ops->ovl_get_max_size(&width, &height);
+		if (mode->hdisplay > width)
+			r = -EINVAL;
+	}
+
 	if (!r) {
 		/* check if vrefresh is still valid */
 		new_mode = drm_mode_duplicate(dev, mode);
-- 
2.9.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2018-03-26 16:21 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-26 16:21 [Patch v2 0/6] drm/omap: Add virtual-planes support Benoit Parrot
2018-03-26 16:21 ` Benoit Parrot [this message]
2018-04-04 11:12   ` [Patch v2 1/6] drm/omap: Add ability to filter out modes which can't be supported Tomi Valkeinen
2018-04-04 13:15     ` Benoit Parrot
2018-04-04 14:23       ` Laurent Pinchart
2018-04-05 10:21         ` Tomi Valkeinen
2018-04-24 19:08           ` Laurent Pinchart
2018-03-26 16:21 ` [Patch v2 2/6] dt-bindings: display/ti: Move common dispc bindings to omap-dss.txt Benoit Parrot
2018-04-04 14:29   ` Laurent Pinchart
2018-04-27 13:26     ` Benoit Parrot
2018-03-26 16:21 ` [Patch v2 3/6] dt-bindings: display/ti: Add plane binding to dispc node Benoit Parrot
2018-04-04 14:36   ` Laurent Pinchart
2018-04-04 14:56     ` Tomi Valkeinen
2018-04-19  6:35       ` Daniel Vetter
2018-03-26 16:21 ` [Patch v2 4/6] drm/omap: Add virtual plane DT parsing support Benoit Parrot
2018-03-26 16:21 ` [Patch v2 5/6] drm/omap: Add virtual plane support to omap_plane Benoit Parrot
2018-04-05 11:14   ` Tomi Valkeinen
2018-03-26 16:21 ` [Patch v2 6/6] drm/omap: Allow wider display when a virtual plane is available Benoit Parrot
2018-04-05 10:40   ` Tomi Valkeinen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180326162128.8740-2-bparrot@ti.com \
    --to=bparrot@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jsarha@ti.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=peter.ujfalusi@ti.com \
    --cc=tomi.valkeinen@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).