From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH v5 1/2] mfd: arizona: Update reset pin to use GPIOD Date: Wed, 28 Mar 2018 12:07:53 +0100 Message-ID: <20180328110753.vqhngsus5gpl6qld@dell> References: <20180312155201.30108-1-ckeepax@opensource.cirrus.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Return-path: Content-Disposition: inline In-Reply-To: <20180312155201.30108-1-ckeepax@opensource.cirrus.com> Sender: linux-kernel-owner@vger.kernel.org To: Charles Keepax Cc: robh+dt@kernel.org, mark.rutland@arm.com, linus.walleij@linaro.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, patches@opensource.cirrus.com List-Id: devicetree@vger.kernel.org On Mon, 12 Mar 2018, Charles Keepax wrote: > Now GPIOD has support for both pdata systems and for non-standard DT > bindings the Arizona reset GPIO can be converted to use it. Worth > noting gpiod_set_raw_value_cansleep is used to match the behaviour > of the old GPIOs. This is because the part is fairly widely used and > it is unknown how many DTs are correctly setting active low through > device tree, so to avoid breaking any existing users it is best to > match the previous behaviour. > > Signed-off-by: Charles Keepax > --- > > Changes since v4: > - Don't use a switch statement for handling return values > - Add some comments to the handling for the older binding > - Use gpiod_set_raw_value_cansleep to avoid potential breakage > > I have also removed Linus's reviewed-by was a bit border line but > I felt there have probably been enough code changes since he gave > it that it was probably safer to remove it. > > Thanks, > Charles > > drivers/mfd/arizona-core.c | 53 ++++++++++++++++++++++++++------------- > include/linux/mfd/arizona/pdata.h | 3 ++- > 2 files changed, 37 insertions(+), 19 deletions(-) Applied with Linus' Ack, thanks -- Lee Jones [李琼斯] Linaro Services Technical Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog