From mboxrd@z Thu Jan 1 00:00:00 1970 From: Pavel Machek Subject: Re: call/normal switch was Re: omap4-droid4: voice call support was Date: Sun, 1 Apr 2018 15:18:52 +0200 Message-ID: <20180401131852.GA11086@amd> References: <20180327222237.wcx2aqznvdrvbaa5@earth.universe> <20180328022910.GM29239@sirena.org.uk> <20180328140219.f6667up5evrrafkv@earth.universe> <20180329014507.GM5700@atomide.com> <20180331145531.GA10404@amd> <20180331181935.GX5700@atomide.com> <20180331191939.GA8999@amd> <20180331194616.GA19388@amd> <20180331195524.GB19388@amd> <20180331234314.GZ5700@atomide.com> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="===============3556982793431663491==" Return-path: In-Reply-To: <20180331234314.GZ5700@atomide.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: alsa-devel-bounces@alsa-project.org Sender: alsa-devel-bounces@alsa-project.org To: Tony Lindgren Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, kernel@collabora.com, Dan Williams , linux-kernel@vger.kernel.org, Takashi Iwai , Liam Girdwood , Rob Herring , Mark Brown , Sebastian Reichel , linux-omap@vger.kernel.org, Lee Jones List-Id: devicetree@vger.kernel.org --===============3556982793431663491== Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="x+6KMIRAuhnl3hBn" Content-Disposition: inline --x+6KMIRAuhnl3hBn Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable On Sat 2018-03-31 16:43:14, Tony Lindgren wrote: > * Pavel Machek [180331 19:56]: > > On Sat 2018-03-31 21:46:16, Pavel Machek wrote: > > > On Sat 2018-03-31 21:19:39, Pavel Machek wrote: > > > > On Sat 2018-03-31 11:19:35, Tony Lindgren wrote: > > > > > Cool :) Microphone still does not work for me.. I tried tweaking > > > > > the alsamixer settings but no mic. This is with cold boot with > > > > > droid4-kexecboot if that might make a difference, we may have > > > > > some register uninitialized somewhere. Any ideas? > > > >=20 > > > > Ok, I was focusing on the speaker side. > > > >=20 > > > > alsamixer, tab to go to capture settings, set it to 37 37 Mic2 Mic1 > > > > should work, according to my notes, but not recently tested and not > > > > tested against real human. > > > >=20 > > > > I'll attempt to test it, but something in my userland shuts down > > > > system just after boot 60% of time, which is rather annoying. > > >=20 > > > Hmm. So I tried again, and setting Mic1 and back in the capture > > > settings crashed the modem. Bang, disconnected from the USB. > >=20 > > Next try, and it worked this time. > >=20 > > _Before the call_, set mode to Normal and then Call. Then go to > > capture, and set 100 100 Mic2 Mic1. Then place a call, > >=20 > > AT+CFUN=3D1 > > OK > > ATD6; >=20 > No luck with microphone here :( Using ttyUSB4, AT+CFUN=3D1 > works, but ATD command on it just hangs the USB interface > and I have to reload phy-mapphone-mdm6600 to reset the > modem. Test call with real human worked (thanks to Rolf K.), I could hear him well but he reported call was very quiet. And that was with capture settings at 100%. If you had a register dump from android with mics working, preferably not in speaker mode, perhaps I could try to figure it out? Pavel --=20 (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blo= g.html --x+6KMIRAuhnl3hBn Content-Type: application/pgp-signature; name="signature.asc" Content-Description: Digital signature -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iEYEARECAAYFAlrA3DwACgkQMOfwapXb+vKQyACgnbrFs3rTKvHCoMKHWoeXGdpR MF4AoKlnNqMScX5ldLO34asSo9+ZYKH8 =XUgN -----END PGP SIGNATURE----- --x+6KMIRAuhnl3hBn-- --===============3556982793431663491== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline --===============3556982793431663491==--