From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jae Hyun Yoo Subject: [PATCH v3 04/10] Documentations: dt-bindings: Add a document of PECI adapter driver for Aspeed AST24xx/25xx SoCs Date: Tue, 10 Apr 2018 11:32:06 -0700 Message-ID: <20180410183212.16787-5-jae.hyun.yoo@linux.intel.com> References: <20180410183212.16787-1-jae.hyun.yoo@linux.intel.com> Return-path: In-Reply-To: <20180410183212.16787-1-jae.hyun.yoo@linux.intel.com> Sender: linux-kernel-owner@vger.kernel.org To: Alan Cox , Andrew Jeffery , Andrew Lunn , Andy Shevchenko , Arnd Bergmann , Benjamin Herrenschmidt , Fengguang Wu , Greg KH , Guenter Roeck , Haiyue Wang , James Feist , Jason M Biils , Jean Delvare , Joel Stanley , Julia Cartwright , Miguel Ojeda , Milton Miller II , Pavel Machek , Randy Dunlap , Stef van Os Cc: linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, devicetree@vger.kernel.org, linux-hwmon@vger.kernel.org, linux-arm-kernel@lists.infradead.org, openbmc@lists.ozlabs.org, Jae Hyun Yoo List-Id: devicetree@vger.kernel.org This commit adds a dt-bindings document of PECI adapter driver for Aspeed AST24xx/25xx SoCs. Signed-off-by: Jae Hyun Yoo Reviewed-by: Haiyue Wang Reviewed-by: James Feist Reviewed-by: Vernon Mauery Cc: Alan Cox Cc: Andrew Jeffery Cc: Andrew Lunn Cc: Andy Shevchenko Cc: Arnd Bergmann Cc: Benjamin Herrenschmidt Cc: Fengguang Wu Cc: Greg KH Cc: Guenter Roeck Cc: Jason M Biils Cc: Jean Delvare Cc: Joel Stanley Cc: Julia Cartwright Cc: Miguel Ojeda Cc: Milton Miller II Cc: Pavel Machek Cc: Randy Dunlap Cc: Stef van Os Cc: Sumeet R Pawnikar --- .../devicetree/bindings/peci/peci-aspeed.txt | 60 ++++++++++++++++++++++ 1 file changed, 60 insertions(+) create mode 100644 Documentation/devicetree/bindings/peci/peci-aspeed.txt diff --git a/Documentation/devicetree/bindings/peci/peci-aspeed.txt b/Documentation/devicetree/bindings/peci/peci-aspeed.txt new file mode 100644 index 000000000000..4598bb8c20fa --- /dev/null +++ b/Documentation/devicetree/bindings/peci/peci-aspeed.txt @@ -0,0 +1,60 @@ +Device tree configuration for PECI buses on the AST24XX and AST25XX SoCs. + +Required properties: +- compatible : Should be "aspeed,ast2400-peci" or "aspeed,ast2500-peci" + - aspeed,ast2400-peci: Aspeed AST2400 family PECI + controller + - aspeed,ast2500-peci: Aspeed AST2500 family PECI + controller +- reg : Should contain PECI controller registers location and + length. +- #address-cells : Should be <1>. +- #size-cells : Should be <0>. +- interrupts : Should contain PECI controller interrupt. +- clocks : Should contain clock source for PECI controller. + Should reference clkin. +- clock_frequency : Should contain the operation frequency of PECI controller + in units of Hz. + 187500 ~ 24000000 + +Optional properties: +- msg-timing-nego : Message timing negotiation period. This value will + determine the period of message timing negotiation to be + issued by PECI controller. The unit of the programmed + value is four times of PECI clock period. + 0 ~ 255 (default: 1) +- addr-timing-nego : Address timing negotiation period. This value will + determine the period of address timing negotiation to be + issued by PECI controller. The unit of the programmed + value is four times of PECI clock period. + 0 ~ 255 (default: 1) +- rd-sampling-point : Read sampling point selection. The whole period of a bit + time will be divided into 16 time frames. This value will + determine the time frame in which the controller will + sample PECI signal for data read back. Usually in the + middle of a bit time is the best. + 0 ~ 15 (default: 8) +- cmd_timeout_ms : Command timeout in units of ms. + 1 ~ 60000 (default: 1000) + +Example: + peci: peci@1e78b000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e78b000 0x60>; + + peci0: peci-bus@0 { + compatible = "aspeed,ast2500-peci"; + reg = <0x0 0x60>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <15>; + clocks = <&clk_clkin>; + clock-frequency = <24000000>; + msg-timing-nego = <1>; + addr-timing-nego = <1>; + rd-sampling-point = <8>; + cmd-timeout-ms = <1000>; + }; + }; -- 2.16.2