Re: [PATCH v2 3/4] arm64: dts: renesas: r8a77970: add LVDS support

[niklas soderlund <niklas.soderlund@ragnatech.se>]

Hi Jacopo, Sergei,

On 2018-04-11 11:53:28 +0200, Jacopo Mondi wrote:
> Hi Sergei, Niklas
> 
> On Tue, Apr 10, 2018 at 08:12:36PM +0300, Sergei Shtylyov wrote:
> > On 04/10/2018 03:13 PM, jacopo mondi wrote:
> >
> > >>> From: Niklas S�derlund <niklas.soderlund+renesas@ragnatech.se>
> > >>>
> > >>> Add the LVDS device to r8a77970.dtsi in a disabled state. Also connect
> > >>> the it to the LVDS output of the DU.
> > >>>
> > >>> Signed-off-by: Niklas S�derlund <niklas.soderlund+renesas@ragnatech.se>
> > >>> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> > >>> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> > >>>
> > >>> ---
> > >>> v1 -> v2:
> > >>> - Rebased on the modified endpoint name and changed patch subject to
> > >>>   comply with other patches in the series from Sergei.
> > >>
> > >>    Stop, what was wrong with my R8A77970 LVDS patch, reposted on the popular
> > >> demand? :-)
> > >>
> > >
> > > Nothing wrong, I found out about your right now.
> > > I see a very small difference as
> > >          lvds@feb90000 vs lvds-encoder@feb90000
> >
> >    Yes, I thought the latter was closer to a "generic" name that DT spec requires...
> >
> > > You can add your signed-off-by ofc if you think that's the case.
> >
> >    Didn't understand what you mean here...
> 
> Don't worry, I will resend this and use (part of) your series
> [PATCH v2 0/5] Add R8A77970/V3MSK LVDS/HDMI support
> 
> But please note that:
> [1/5] from your series has already been collected by Simon
> I have to reapply Laurent's comment on this series to your one (so I
> have to resend it anyhow)
> [5/5] from your series shall be resent to take into account the newly
> developed LVDS decoder driver (once it has been accepted)
> 
> I have anyway to repost your patches then, and as I did in this series
> you are ofc listed as author already, so I have missed what's the
> difference actually except from LVDS patch I collected from Niklas and not
> from your series.
> 
> Niklas I picked up patches 1-3 of this series from your tree.
> 1 and 2 are patches from Sergei's series
> 3 is from you but was also in Sergei's series and I picked yours as it
> was there already. Can I rebase on top of Sergei's one instead?

Yes please do so. And sorry for this mess, it is my fault as I missed 
one of Sergei's patches when integrating changes I made to 
r8a77970-eagle.dts. For this series always pick Sergei's patches over 
mine :-)

Once more sorry for the mess to both of you.

> 
> Thanks
>    j



-- 
Regards,
Niklas S�derlund