Re: [PATCH 3/4] lan78xx: Read LED modes from Device Tree

[Andrew Lunn <andrew@lunn.ch>]

On Thu, Apr 12, 2018 at 02:55:35PM +0100, Phil Elwell wrote:
> Add support for DT property "microchip,led-modes", a vector of two
> cells (u32s) in the range 0-15, each of which sets the mode for one
> of the two LEDs. Some possible values are:
> 
>     0=link/activity          1=link1000/activity
>     2=link100/activity       3=link10/activity
>     4=link100/1000/activity  5=link10/1000/activity
>     6=link10/100/activity    14=off    15=on
> 
> Also use the presence of the DT property to indicate that the
> LEDs should be enabled - necessary in the event that no valid OTP
> or EEPROM is available.

I'm not a fan of this, but at the moment, we don't have anything
better.

Please follow what mscc does, add a header file for the LED settings.

       Andrew

> 
> Signed-off-by: Phil Elwell <phil@raspberrypi.org>
> ---
>  drivers/net/usb/lan78xx.c | 20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/drivers/net/usb/lan78xx.c b/drivers/net/usb/lan78xx.c
> index d98397b..ffb483d 100644
> --- a/drivers/net/usb/lan78xx.c
> +++ b/drivers/net/usb/lan78xx.c
> @@ -2008,6 +2008,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
>  {
>  	int ret;
>  	u32 mii_adv;
> +	u32 led_modes[2];
>  	struct phy_device *phydev;
>  
>  	phydev = phy_find_first(dev->mdiobus);
> @@ -2097,6 +2098,25 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
>  		(void)lan78xx_set_eee(dev->net, &edata);
>  	}
>  
> +	if (!of_property_read_u32_array(dev->udev->dev.of_node,
> +					"microchip,led-modes",
> +					led_modes, ARRAY_SIZE(led_modes))) {
> +		u32 reg;
> +		int i;
> +
> +		reg = phy_read(phydev, 0x1d);
> +		for (i = 0; i < ARRAY_SIZE(led_modes); i++) {
> +			reg &= ~(0xf << (i * 4));
> +			reg |= (led_modes[i] & 0xf) << (i * 4);
> +		}

Please add range checks for led_modes[i] and return -EINVAL if the
check fails.

      Andrew