From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Vinod Koul <vinod.koul@intel.com>,
Mark Rutland <mark.rutland@arm.com>,
Ralf Baechle <ralf@linux-mips.org>,
James Hogan <jhogan@kernel.org>,
Ulf Hansson <ulf.hansson@linaro.org>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Boris Brezillon <boris.brezillon@bootlin.com>,
Marek Vasut <marek.vasut@gmail.com>,
Richard Weinberger <richard@nod.at>,
Matthias Brugger <matthias.bgg@gmail.com>,
Tanmay Inamdar <tinamdar@apm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Rodolfo Giometti <giometti@enneenne.com>
Subject: [PATCH] dt-bindings: more status property removal from examples
Date: Tue, 17 Apr 2018 08:57:32 -0500 [thread overview]
Message-ID: <20180417135732.10100-1-robh@kernel.org> (raw)
Whack-a-mole some more occurrences of status in examples.
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Tanmay Inamdar <tinamdar@apm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: Rob Herring <robh@kernel.org>
---
Documentation/devicetree/bindings/dma/k3dma.txt | 1 -
Documentation/devicetree/bindings/dma/ti-edma.txt | 1 -
Documentation/devicetree/bindings/mips/lantiq/rcu.txt | 2 --
Documentation/devicetree/bindings/mmc/tmio_mmc.txt | 4 ----
Documentation/devicetree/bindings/mtd/mtk-nand.txt | 4 ----
Documentation/devicetree/bindings/pci/xgene-pci.txt | 7 -------
Documentation/devicetree/bindings/pps/pps-gpio.txt | 1 -
7 files changed, 20 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
index 23f8d712c3ce..4945aeac4dc4 100644
--- a/Documentation/devicetree/bindings/dma/k3dma.txt
+++ b/Documentation/devicetree/bindings/dma/k3dma.txt
@@ -23,7 +23,6 @@ Controller:
dma-requests = <27>;
interrupts = <0 12 4>;
clocks = <&pclk>;
- status = "disable";
};
Client:
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 66026dcf53e1..3f15f6644527 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -190,7 +190,6 @@ mmc0: mmc@23000000 {
power-domains = <&k2g_pds 0xb>;
clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
clock-names = "fck", "mmchsdb_fck";
- status = "disabled";
};
------------------------------------------------------------------------------
diff --git a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
index a086f1e1cdd7..7f0822b4beae 100644
--- a/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
+++ b/Documentation/devicetree/bindings/mips/lantiq/rcu.txt
@@ -61,7 +61,6 @@ Example of the RCU bindings on a xRX200 SoC:
usb_phy0: usb2-phy@18 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x18 4>, <0x38 4>;
- status = "disabled";
resets = <&reset1 4 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
@@ -71,7 +70,6 @@ Example of the RCU bindings on a xRX200 SoC:
usb_phy1: usb2-phy@34 {
compatible = "lantiq,xrx200-usb2-phy";
reg = <0x34 4>, <0x3C 4>;
- status = "disabled";
resets = <&reset1 5 4>, <&reset0 4 4>;
reset-names = "phy", "ctrl";
diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
index 2d5287eeed95..634bb66fc49c 100644
--- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt
@@ -67,7 +67,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 314>;
- status = "disabled";
};
sdhi1: sd@ee120000 {
@@ -81,7 +80,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <195000000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 313>;
- status = "disabled";
};
sdhi2: sd@ee140000 {
@@ -95,7 +93,6 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 312>;
- status = "disabled";
};
sdhi3: sd@ee160000 {
@@ -109,5 +106,4 @@ Example: R8A7790 (R-Car H2) SDHI controller nodes
max-frequency = <97500000>;
power-domains = <&sysc R8A7790_PD_ALWAYS_ON>;
resets = <&cpg 311>;
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/mtd/mtk-nand.txt b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
index 1c88526dedfc..c5ba6a4ba1f2 100644
--- a/Documentation/devicetree/bindings/mtd/mtk-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/mtk-nand.txt
@@ -20,7 +20,6 @@ Required NFI properties:
- interrupts: Interrupts of NFI.
- clocks: NFI required clocks.
- clock-names: NFI clocks internal name.
-- status: Disabled default. Then set "okay" by platform.
- ecc-engine: Required ECC Engine node.
- #address-cells: NAND chip index, should be 1.
- #size-cells: Should be 0.
@@ -34,7 +33,6 @@ Example:
clocks = <&pericfg CLK_PERI_NFI>,
<&pericfg CLK_PERI_NFI_PAD>;
clock-names = "nfi_clk", "pad_clk";
- status = "disabled";
ecc-engine = <&bch>;
#address-cells = <1>;
#size-cells = <0>;
@@ -152,7 +150,6 @@ Required BCH properties:
- interrupts: Interrupts of ECC.
- clocks: ECC required clocks.
- clock-names: ECC clocks internal name.
-- status: Disabled default. Then set "okay" by platform.
Example:
@@ -162,5 +159,4 @@ Example:
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_NFI_ECC>;
clock-names = "nfiecc_clk";
- status = "disabled";
};
diff --git a/Documentation/devicetree/bindings/pci/xgene-pci.txt b/Documentation/devicetree/bindings/pci/xgene-pci.txt
index 6fd2decfa66c..92490330dc1c 100644
--- a/Documentation/devicetree/bindings/pci/xgene-pci.txt
+++ b/Documentation/devicetree/bindings/pci/xgene-pci.txt
@@ -25,8 +25,6 @@ Optional properties:
Example:
-SoC-specific DT Entry:
-
pcie0: pcie@1f2b0000 {
status = "disabled";
device_type = "pci";
@@ -50,8 +48,3 @@ SoC-specific DT Entry:
clocks = <&pcie0clk 0>;
};
-
-Board-specific DT Entry:
- &pcie0 {
- status = "ok";
- };
diff --git a/Documentation/devicetree/bindings/pps/pps-gpio.txt b/Documentation/devicetree/bindings/pps/pps-gpio.txt
index 0de23b793657..3683874832ae 100644
--- a/Documentation/devicetree/bindings/pps/pps-gpio.txt
+++ b/Documentation/devicetree/bindings/pps/pps-gpio.txt
@@ -20,5 +20,4 @@ Example:
assert-falling-edge;
compatible = "pps-gpio";
- status = "okay";
};
--
2.14.1
next reply other threads:[~2018-04-17 13:57 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-17 13:57 Rob Herring [this message]
2018-04-17 15:43 ` [PATCH] dt-bindings: more status property removal from examples Vinod Koul
2018-04-23 15:05 ` Ulf Hansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180417135732.10100-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=bhelgaas@google.com \
--cc=boris.brezillon@bootlin.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=giometti@enneenne.com \
--cc=jhogan@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marek.vasut@gmail.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=ralf@linux-mips.org \
--cc=richard@nod.at \
--cc=tinamdar@apm.com \
--cc=ulf.hansson@linaro.org \
--cc=vinod.koul@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).