devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: jacopo mondi <jacopo@jmondi.org>
To: Akinobu Mita <akinobu.mita@gmail.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Mauro Carvalho Chehab <mchehab@s-opensource.com>
Subject: Re: [PATCH v2 05/10] media: ov772x: use generic names for reset and powerdown gpios
Date: Wed, 18 Apr 2018 13:34:42 +0200	[thread overview]
Message-ID: <20180418113442.GB20486@w540> (raw)
In-Reply-To: <1523847111-12986-6-git-send-email-akinobu.mita@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 2872 bytes --]

Hi Akinobu,

On Mon, Apr 16, 2018 at 11:51:46AM +0900, Akinobu Mita wrote:
> The ov772x driver uses "rstb-gpios" and "pwdn-gpios" for reset and
> powerdown pins.  However, using generic names for thse gpios is preferred.

nit: 'these gpios'

> ("reset-gpios" and "powerdown-gpios" respectively)
>
> There is only one mainline user for these gpios, so rename to generic
> names.
>
> Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>

Bindings update should come first.
Not a big deal.

Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>

> ---
> * v2
> - New patch
>
>  arch/sh/boards/mach-migor/setup.c | 5 +++--
>  drivers/media/i2c/ov772x.c        | 8 ++++----
>  2 files changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
> index 271dfc2..73b9ee4 100644
> --- a/arch/sh/boards/mach-migor/setup.c
> +++ b/arch/sh/boards/mach-migor/setup.c
> @@ -351,8 +351,9 @@ static struct platform_device migor_ceu_device = {
>  static struct gpiod_lookup_table ov7725_gpios = {
>  	.dev_id		= "0-0021",
>  	.table		= {
> -		GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "pwdn", GPIO_ACTIVE_HIGH),
> -		GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "rstb", GPIO_ACTIVE_LOW),
> +		GPIO_LOOKUP("sh7722_pfc", GPIO_PTT0, "powerdown",
> +			    GPIO_ACTIVE_HIGH),
> +		GPIO_LOOKUP("sh7722_pfc", GPIO_PTT3, "reset", GPIO_ACTIVE_LOW),
>  	},
>  };
>
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index 0ae2a4f..88d1418a 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -837,10 +837,10 @@ static int ov772x_power_on(struct ov772x_priv *priv)
>  	 * available to handle this cleanly, request the GPIO temporarily
>  	 * to avoid conflicts.
>  	 */
> -	priv->rstb_gpio = gpiod_get_optional(&client->dev, "rstb",
> +	priv->rstb_gpio = gpiod_get_optional(&client->dev, "reset",
>  					     GPIOD_OUT_LOW);
>  	if (IS_ERR(priv->rstb_gpio)) {
> -		dev_info(&client->dev, "Unable to get GPIO \"rstb\"");
> +		dev_info(&client->dev, "Unable to get GPIO \"reset\"");
>  		return PTR_ERR(priv->rstb_gpio);
>  	}
>
> @@ -1309,10 +1309,10 @@ static int ov772x_probe(struct i2c_client *client,
>  		goto error_ctrl_free;
>  	}
>
> -	priv->pwdn_gpio = gpiod_get_optional(&client->dev, "pwdn",
> +	priv->pwdn_gpio = gpiod_get_optional(&client->dev, "powerdown",
>  					     GPIOD_OUT_LOW);
>  	if (IS_ERR(priv->pwdn_gpio)) {
> -		dev_info(&client->dev, "Unable to get GPIO \"pwdn\"");
> +		dev_info(&client->dev, "Unable to get GPIO \"powerdown\"");
>  		ret = PTR_ERR(priv->pwdn_gpio);
>  		goto error_clk_put;
>  	}
> --
> 2.7.4
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2018-04-18 11:34 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-16  2:51 [PATCH v2 00/10] media: ov772x: support media controller, device tree probing, etc Akinobu Mita
2018-04-16  2:51 ` [PATCH v2 01/10] media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING Akinobu Mita
2018-04-18 10:05   ` jacopo mondi
2018-04-18 10:41     ` Sakari Ailus
2018-04-18 12:12       ` jacopo mondi
2018-04-16  2:51 ` [PATCH v2 02/10] media: ov772x: add checks for register read errors Akinobu Mita
2018-04-18 10:13   ` jacopo mondi
2018-04-16  2:51 ` [PATCH v2 03/10] media: ov772x: create subdevice device node Akinobu Mita
2018-04-16 10:56   ` Sakari Ailus
2018-04-16  2:51 ` [PATCH v2 04/10] media: ov772x: add media controller support Akinobu Mita
2018-04-18 11:28   ` jacopo mondi
2018-04-18 11:58     ` Sakari Ailus
2018-04-18 12:13       ` jacopo mondi
2018-04-18 13:05         ` Sakari Ailus
2018-04-16  2:51 ` [PATCH v2 05/10] media: ov772x: use generic names for reset and powerdown gpios Akinobu Mita
2018-04-18 11:34   ` jacopo mondi [this message]
2018-04-16  2:51 ` [PATCH v2 06/10] media: dt-bindings: ov772x: add device tree binding Akinobu Mita
2018-04-16 21:36   ` Rob Herring
2018-04-18 11:35   ` jacopo mondi
2018-04-16  2:51 ` [PATCH v2 07/10] media: ov772x: support device tree probing Akinobu Mita
2018-04-18 11:48   ` jacopo mondi
2018-04-16  2:51 ` [PATCH v2 08/10] media: ov772x: handle nested s_power() calls Akinobu Mita
2018-04-18 12:41   ` jacopo mondi
2018-04-19 16:21     ` Akinobu Mita
2018-04-16  2:51 ` [PATCH v2 09/10] media: ov772x: reconstruct s_frame_interval() Akinobu Mita
2018-04-16  2:51 ` [PATCH v2 10/10] media: ov772x: avoid accessing registers under power saving mode Akinobu Mita
2018-04-16 10:55   ` Sakari Ailus
2018-04-17 16:52     ` Akinobu Mita
2018-04-18 12:55   ` jacopo mondi
2018-04-18 13:17     ` Sakari Ailus
2018-04-18 13:34       ` jacopo mondi
2018-04-20 16:35     ` Akinobu Mita

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180418113442.GB20486@w540 \
    --to=jacopo@jmondi.org \
    --cc=akinobu.mita@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@s-opensource.com \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).