From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from muru.com ([72.249.23.125]:37158 "EHLO muru.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752558AbeDRRgc (ORCPT ); Wed, 18 Apr 2018 13:36:32 -0400 From: Tony Lindgren Subject: [PATCH] ARM: dts: Fix cm2 and prm sizes for omap4 Date: Wed, 18 Apr 2018 10:36:29 -0700 Message-Id: <20180418173629.28055-1-tony@atomide.com> Sender: devicetree-owner@vger.kernel.org To: linux-omap@vger.kernel.org Cc: =?UTF-8?q?Beno=C3=AEt=20Cousson?= , devicetree@vger.kernel.org, Tero Kristo List-ID: The size of these modules is 0x2000, not 0x3000. The extra 0x1000 after 0x2000 is for the interconnect target agent which is a separate device. Fixes: 7415b0b4c645 ("ARM: dts: omap4: add minimal l4 bus layout with control module support") Cc: Tero Kristo Signed-off-by: Tony Lindgren --- arch/arm/boot/dts/omap4.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -163,10 +163,10 @@ cm2: cm2@8000 { compatible = "ti,omap4-cm2", "simple-bus"; - reg = <0x8000 0x3000>; + reg = <0x8000 0x2000>; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x8000 0x3000>; + ranges = <0 0x8000 0x2000>; cm2_clocks: clocks { #address-cells = <1>; @@ -250,11 +250,11 @@ prm: prm@6000 { compatible = "ti,omap4-prm"; - reg = <0x6000 0x3000>; + reg = <0x6000 0x2000>; interrupts = ; #address-cells = <1>; #size-cells = <1>; - ranges = <0 0x6000 0x3000>; + ranges = <0 0x6000 0x2000>; prm_clocks: clocks { #address-cells = <1>; -- 2.17.0