From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Brandon Maier Subject: [PATCH 1/2] dt-bindings: net: gmii2rgmii: Fix typos Date: Sat, 21 Apr 2018 23:01:31 -0500 Message-Id: <20180422040132.1389-1-brandon.maier@gmail.com> To: robh+dt@kernel.org Cc: mark.rutland@arm.com, michal.simek@xilinx.com, devicetree@vger.kernel.org, Brandon Maier List-ID: The wording of 'provides the RGMII' is unclear, and should be 'is a converter' to be consistent with the rest of this Doc. Also fix up assorted spelling and capitalization typos. Signed-off-by: Brandon Maier --- Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt b/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt index 038dda48b8e6..b2258ce5004d 100644 --- a/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt +++ b/Documentation/devicetree/bindings/net/xilinx_gmii2rgmii.txt @@ -2,15 +2,15 @@ XILINX GMIITORGMII Converter Driver Device Tree Bindings -------------------------------------------------------- The Gigabit Media Independent Interface (GMII) to Reduced Gigabit Media -Independent Interface (RGMII) core provides the RGMII between RGMII-compliant -Ethernet physical media devices (PHY) and the Gigabit Ethernet controller. +Independent Interface (RGMII) core is a converter between RGMII-compliant +Ethernet physical media devices (PHY) and GMII Ethernet controllers. This core can be used in all three modes of operation(10/100/1000 Mb/s). The Management Data Input/Output (MDIO) interface is used to configure the -Speed of operation. This core can switch dynamically between the three -Different speed modes by configuring the conveter register through mdio write. +speed of operation. This core can switch dynamically between the three +different speed modes by configuring the converter register through mdio writes. -This converter sits between the ethernet MAC and the external phy. -MAC <==> GMII2RGMII <==> RGMII_PHY +This converter sits between the ethernet MAC and the external PHY. +GMII_MAC <==> GMII2RGMII <==> RGMII_PHY For more details about mdio please refer phy.txt file in the same directory. -- 2.11.0