From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chen-Yu Tsai Subject: [PATCH 1/7] ARM: dts: sun8i: h3: fix ALL-H3-CC H3 ver VCC-1V2 regulator voltage Date: Tue, 24 Apr 2018 19:34:18 +0800 Message-ID: <20180424113424.13196-2-wens@csie.org> References: <20180424113424.13196-1-wens@csie.org> Return-path: In-Reply-To: <20180424113424.13196-1-wens@csie.org> Sender: linux-kernel-owner@vger.kernel.org To: Maxime Ripard Cc: Chen-Yu Tsai , devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Neil Armstrong , stable@vger.kernel.org List-Id: devicetree@vger.kernel.org The voltage of the VCC-1V2 regulator on the ALL-H3-CC H3 ver. should be 1.2V, not the 3.3V currently defined in the device tree. Fix the voltage in the device tree. Fixes: 6ca358645d4d ("ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver.") Cc: # 4.16.x Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts index 5971b8b0b768..db6b35bb65ff 100644 --- a/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts +++ b/arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts @@ -62,8 +62,8 @@ reg_vcc1v2: vcc1v2 { compatible = "regulator-fixed"; regulator-name = "vcc1v2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; vin-supply = <®_vcc5v0>; -- 2.17.0