devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Ulf Hansson <ulf.hansson@linaro.org>,
	Adrian Hunter <adrian.hunter@intel.com>
Cc: kishon@ti.com, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	Tony Lindgren <tony@atomide.com>
Subject: [PATCH v4 09/12] mmc: sdhci-omap: Workaround for Errata i834
Date: Wed, 25 Apr 2018 17:39:34 +0530	[thread overview]
Message-ID: <20180425120937.29867-10-kishon@ti.com> (raw)
In-Reply-To: <20180425120937.29867-1-kishon@ti.com>

Errata i834 in AM572x Sitara Processors Silicon Revision 2.0, 1.1
(SPRZ429L July 2014–Revised April 2018 [1]) mentions the maximum
obtainable timeout through MMC host controller is 700ms. And for
commands taking longer than 700ms, hardware timeout should be
disabled and software timeout should be used.

The workaround for Errata i834 can be achieved by adding
SDHCI_QUIRK2_DISABLE_HW_TIMEOUT quirk in sdhci-omap.

[1] -> http://www.ti.com/lit/er/sprz429l/sprz429l.pdf

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
---
 drivers/mmc/host/sdhci-omap.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 2d9ea23610d5..b2c54940d032 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -715,7 +715,8 @@ static const struct sdhci_pltfm_data sdhci_omap_pdata = {
 		  SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC,
 	.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN |
 		   SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
-		   SDHCI_QUIRK2_RSP_136_HAS_CRC,
+		   SDHCI_QUIRK2_RSP_136_HAS_CRC |
+		   SDHCI_QUIRK2_DISABLE_HW_TIMEOUT,
 	.ops = &sdhci_omap_ops,
 };
 
-- 
2.17.0

  parent reply	other threads:[~2018-04-25 12:09 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-25 12:09 [PATCH v4 00/12] mmc: sdhci-omap: Add UHS/HS200 mode support Kishon Vijay Abraham I
2018-04-25 12:09 ` [PATCH v4 01/12] mmc: sdhci-omap: Fix when capabilities are obtained from SDHCI_CAPABILITIES reg Kishon Vijay Abraham I
2018-04-26  7:57   ` Adrian Hunter
2018-04-25 12:09 ` [PATCH v4 02/12] mmc: sdhci-omap: Remove setting ADMA capability in driver Kishon Vijay Abraham I
2018-04-25 12:09 ` [PATCH v4 03/12] mmc: sdhci-omap: Workaround for Errata i843 Kishon Vijay Abraham I
2018-04-25 12:09 ` [PATCH v4 04/12] mmc: sdhci-omap: Invoke sdhci_get_of_property to read sdhci dt properties Kishon Vijay Abraham I
2018-04-25 12:09 ` [PATCH v4 05/12] mmc: sdhci: Disable HS200/HS400 mode if controller can't support 1.8v Kishon Vijay Abraham I
2018-04-26  8:55   ` Adrian Hunter
2018-04-26 10:08     ` Kishon Vijay Abraham I
2018-04-26 10:40       ` Adrian Hunter
2018-04-25 12:09 ` [PATCH v4 06/12] mmc: sdhci: Add quirk to disable HW timeout Kishon Vijay Abraham I
2018-04-25 12:09 ` [PATCH v4 07/12] mmc: sdhci: Factor out target_timeout calculation Kishon Vijay Abraham I
2018-04-25 12:09 ` [PATCH v4 08/12] mmc: sdhci: Program a relatively accurate SW timeout value Kishon Vijay Abraham I
2018-04-26  7:52   ` Adrian Hunter
2018-04-25 12:09 ` Kishon Vijay Abraham I [this message]
2018-04-26  7:53   ` [PATCH v4 09/12] mmc: sdhci-omap: Workaround for Errata i834 Adrian Hunter
2018-04-25 12:09 ` [PATCH v4 10/12] dt-bindings: sdhci-omap: Add K2G specific binding Kishon Vijay Abraham I
2018-04-25 12:09 ` [PATCH v4 11/12] mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC Kishon Vijay Abraham I
2018-04-25 12:09 ` [PATCH v4 12/12] mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180425120937.29867-10-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).