devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: jacopo mondi <jacopo@jmondi.org>
To: Akinobu Mita <akinobu.mita@gmail.com>
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org,
	Jacopo Mondi <jacopo+renesas@jmondi.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Hans Verkuil <hans.verkuil@cisco.com>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	Mauro Carvalho Chehab <mchehab@s-opensource.com>,
	Wolfram Sang <wsa@the-dreams.de>
Subject: Re: [PATCH v4 03/14] media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING
Date: Thu, 3 May 2018 17:46:43 +0200	[thread overview]
Message-ID: <20180503154643.GC19612@w540> (raw)
In-Reply-To: <1525021993-17789-4-git-send-email-akinobu.mita@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 2658 bytes --]

Hi Akinobu,

On Mon, Apr 30, 2018 at 02:13:02AM +0900, Akinobu Mita wrote:
> The ov772x driver only works when the i2c controller have
> I2C_FUNC_PROTOCOL_MANGLING.  However, many i2c controller drivers don't
> support it.
>
> The reason that the ov772x requires I2C_FUNC_PROTOCOL_MANGLING is that
> it doesn't support repeated starts.
>
> This changes the reading ov772x register method so that it doesn't
> require I2C_FUNC_PROTOCOL_MANGLING by calling two separated i2c messages.
>
> Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> Cc: Hans Verkuil <hans.verkuil@cisco.com>
> Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
> Cc: Wolfram Sang <wsa@the-dreams.de>
> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>

As you have sent a separate series to move the SCCB case handling to
the i2c core, and I feel like it may take some time to get there, as
Sakari suggested, I'm fine with this change in the driver code.

Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Thanks
  j

> ---
> * v4
> - No changes
>
>  drivers/media/i2c/ov772x.c | 20 ++++++++++++++------
>  1 file changed, 14 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/i2c/ov772x.c b/drivers/media/i2c/ov772x.c
> index e255070..b6223bf 100644
> --- a/drivers/media/i2c/ov772x.c
> +++ b/drivers/media/i2c/ov772x.c
> @@ -542,9 +542,19 @@ static struct ov772x_priv *to_ov772x(struct v4l2_subdev *sd)
>  	return container_of(sd, struct ov772x_priv, subdev);
>  }
>
> -static inline int ov772x_read(struct i2c_client *client, u8 addr)
> +static int ov772x_read(struct i2c_client *client, u8 addr)
>  {
> -	return i2c_smbus_read_byte_data(client, addr);
> +	int ret;
> +	u8 val;
> +
> +	ret = i2c_master_send(client, &addr, 1);
> +	if (ret < 0)
> +		return ret;
> +	ret = i2c_master_recv(client, &val, 1);
> +	if (ret < 0)
> +		return ret;
> +
> +	return val;
>  }
>
>  static inline int ov772x_write(struct i2c_client *client, u8 addr, u8 value)
> @@ -1255,13 +1265,11 @@ static int ov772x_probe(struct i2c_client *client,
>  		return -EINVAL;
>  	}
>
> -	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
> -					      I2C_FUNC_PROTOCOL_MANGLING)) {
> +	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
>  		dev_err(&adapter->dev,
> -			"I2C-Adapter doesn't support SMBUS_BYTE_DATA or PROTOCOL_MANGLING\n");
> +			"I2C-Adapter doesn't support SMBUS_BYTE_DATA\n");
>  		return -EIO;
>  	}
> -	client->flags |= I2C_CLIENT_SCCB;
>
>  	priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
>  	if (!priv)
> --
> 2.7.4
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2018-05-03 15:46 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-29 17:12 [PATCH v4 00/14] media: ov772x: support media controller, device tree probing, etc Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 01/14] media: dt-bindings: ov772x: add device tree binding Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 02/14] media: ov772x: correct setting of banding filter Akinobu Mita
2018-05-03 15:38   ` jacopo mondi
2018-04-29 17:13 ` [PATCH v4 03/14] media: ov772x: allow i2c controllers without I2C_FUNC_PROTOCOL_MANGLING Akinobu Mita
2018-05-03 15:46   ` jacopo mondi [this message]
2018-04-29 17:13 ` [PATCH v4 04/14] media: ov772x: add checks for register read errors Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 05/14] media: ov772x: add media controller support Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 06/14] media: ov772x: use generic names for reset and powerdown gpios Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 07/14] media: ov772x: omit consumer ID when getting clock reference Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 08/14] media: ov772x: support device tree probing Akinobu Mita
2018-05-03 19:57   ` jacopo mondi
2018-04-29 17:13 ` [PATCH v4 09/14] media: ov772x: handle nested s_power() calls Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 10/14] media: ov772x: reconstruct s_frame_interval() Akinobu Mita
2018-05-03 20:29   ` jacopo mondi
2018-05-04 16:32     ` Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 11/14] media: ov772x: use v4l2_ctrl to get current control value Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 12/14] media: ov772x: avoid accessing registers under power saving mode Akinobu Mita
2018-05-03 21:03   ` jacopo mondi
2018-05-04 14:50     ` Akinobu Mita
2018-05-04 14:57       ` jacopo mondi
2018-04-29 17:13 ` [PATCH v4 13/14] media: ov772x: make set_fmt() return -EBUSY while streaming Akinobu Mita
2018-04-29 17:13 ` [PATCH v4 14/14] media: ov772x: create subdevice device node Akinobu Mita

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180503154643.GC19612@w540 \
    --to=jacopo@jmondi.org \
    --cc=akinobu.mita@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=hans.verkuil@cisco.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@s-opensource.com \
    --cc=sakari.ailus@linux.intel.com \
    --cc=wsa@the-dreams.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).