From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Martin Blumenstingl Subject: [PATCH 0/6] Meson8m2 (32-bit ARM) SoC support Date: Sun, 6 May 2018 11:21:13 +0200 Message-Id: <20180506092119.467-1-martin.blumenstingl@googlemail.com> To: linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org, khilman@baylibre.com, carlo@caione.org, robh+dt@kernel.org, mark.rutland@arm.com Cc: balbes-150@yandex.ru, Martin Blumenstingl List-ID: This series adds support for the Meson8m2 SoC. This SoC is mostly compatible with Meson8 while using some peripherals from Meson8b. Patch #4 contains a list of (known) differences between the Meson8 and Meson8m2 SoCs. The first supported board with Meson8m2 SoC is the "Tronsmart MXIII Plus" where Oleg contributed the initial .dts and heavily tested it (many thanks!). His testing also confirmed that the Meson8m2 SoC uses the same register layout for the Ethernet "glue registers (supported by the dwmac-meson8b driver) as Meson8b. Martin Blumenstingl (5): dt-bindings: arm: amlogic: add support for the Meson8m2 SoC dt-bindings: arm: amlogic: add support for the Tronsmart MXIII Plus ARM: meson: add support for the Meson8m2 SoCs ARM: dts: meson: add support for the Meson8m2 SoC ARM: dts: meson8: add the uart_A pins Oleg Ivanov (1): ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus .../devicetree/bindings/arm/amlogic.txt | 6 + arch/arm/boot/dts/Makefile | 2 + arch/arm/boot/dts/meson8.dtsi | 16 ++ arch/arm/boot/dts/meson8m2-mxiii-plus.dts | 244 ++++++++++++++++++ arch/arm/boot/dts/meson8m2.dtsi | 54 ++++ arch/arm/mach-meson/Kconfig | 7 + arch/arm/mach-meson/meson.c | 1 + 7 files changed, 330 insertions(+) create mode 100644 arch/arm/boot/dts/meson8m2-mxiii-plus.dts create mode 100644 arch/arm/boot/dts/meson8m2.dtsi -- 2.17.0