From: David Lechner <david@lechnology.com>
To: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@codeaurora.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Sekhar Nori <nsekhar@ti.com>,
Kevin Hilman <khilman@kernel.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Adam Ford <aford173@gmail.com>,
linux-kernel@vger.kernel.org,
David Lechner <david@lechnology.com>
Subject: [PATCH v10 02/27] clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE
Date: Wed, 9 May 2018 12:25:41 -0500 [thread overview]
Message-ID: <20180509172606.29387-3-david@lechnology.com> (raw)
In-Reply-To: <20180509172606.29387-1-david@lechnology.com>
PLL0 on davinci/da850-type device needs to be registered early in boot
because it is needed for clocksource/clockevent. Change the driver
to use CLK_OF_DECLARE for this special case.
Signed-off-by: David Lechner <david@lechnology.com>
---
v10 changes:
- removed duplicate warning message
v9 changes:
- new patch in v9
drivers/clk/davinci/pll-da850.c | 21 +++++++++++++++++----
drivers/clk/davinci/pll.c | 4 +++-
drivers/clk/davinci/pll.h | 2 +-
3 files changed, 21 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/davinci/pll-da850.c b/drivers/clk/davinci/pll-da850.c
index 00a6ece7b524..fde4642a993f 100644
--- a/drivers/clk/davinci/pll-da850.c
+++ b/drivers/clk/davinci/pll-da850.c
@@ -12,6 +12,8 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
#include <linux/of.h>
#include <linux/types.h>
@@ -135,11 +137,22 @@ static const struct davinci_pll_sysclk_info *da850_pll0_sysclk_info[] = {
NULL
};
-int of_da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip)
+void of_da850_pll0_init(struct device_node *node)
{
- return of_davinci_pll_init(dev, dev->of_node, &da850_pll0_info,
- &da850_pll0_obsclk_info,
- da850_pll0_sysclk_info, 7, base, cfgchip);
+ void __iomem *base;
+ struct regmap *cfgchip;
+
+ base = of_iomap(node, 0);
+ if (!base) {
+ pr_err("%s: ioremap failed\n", __func__);
+ return;
+ }
+
+ cfgchip = syscon_regmap_lookup_by_compatible("ti,da830-cfgchip");
+
+ of_davinci_pll_init(NULL, node, &da850_pll0_info,
+ &da850_pll0_obsclk_info,
+ da850_pll0_sysclk_info, 7, base, cfgchip);
}
static const struct davinci_pll_clk_info da850_pll1_info = {
diff --git a/drivers/clk/davinci/pll.c b/drivers/clk/davinci/pll.c
index f362f10d8459..dcfa780f828a 100644
--- a/drivers/clk/davinci/pll.c
+++ b/drivers/clk/davinci/pll.c
@@ -770,8 +770,10 @@ static struct davinci_pll_platform_data *davinci_pll_get_pdata(struct device *de
return pdata;
}
+/* needed in early boot for clocksource/clockevent */
+CLK_OF_DECLARE(da850_pll0, "ti,da850-pll0", of_da850_pll0_init);
+
static const struct of_device_id davinci_pll_of_match[] = {
- { .compatible = "ti,da850-pll0", .data = of_da850_pll0_init },
{ .compatible = "ti,da850-pll1", .data = of_da850_pll1_init },
{ }
};
diff --git a/drivers/clk/davinci/pll.h b/drivers/clk/davinci/pll.h
index 562652fc0759..b2e5c4496645 100644
--- a/drivers/clk/davinci/pll.h
+++ b/drivers/clk/davinci/pll.h
@@ -123,7 +123,7 @@ int of_davinci_pll_init(struct device *dev, struct device_node *node,
/* Platform-specific callbacks */
int da850_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
-int of_da850_pll0_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
+void of_da850_pll0_init(struct device_node *node);
int of_da850_pll1_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
int dm355_pll2_init(struct device *dev, void __iomem *base, struct regmap *cfgchip);
--
2.17.0
next prev parent reply other threads:[~2018-05-09 17:25 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-09 17:25 [PATCH v10 00/27] ARM: davinci: convert to common clock framework David Lechner
2018-05-09 17:25 ` [PATCH v10 01/27] clk: davinci: pll: allow dev == NULL David Lechner
2018-05-09 17:25 ` David Lechner [this message]
2018-05-15 13:31 ` [PATCH v10 02/27] clk: davinci: da850-pll: change PLL0 to CLK_OF_DECLARE Sekhar Nori
2018-05-15 15:42 ` David Lechner
2018-05-16 5:51 ` Sekhar Nori
2018-05-09 17:25 ` [PATCH v10 03/27] clk: davinci: psc: allow for dev == NULL David Lechner
2018-05-15 13:42 ` Sekhar Nori
2018-05-09 17:25 ` [PATCH v10 04/27] ARM: davinci: pass clock as parameter to davinci_timer_init() David Lechner
2018-05-09 17:25 ` [PATCH v10 05/27] ARM: davinci: da830: add new clock init using common clock framework David Lechner
2018-05-09 17:25 ` [PATCH v10 06/27] ARM: davinci: da850: " David Lechner
2018-05-09 17:25 ` [PATCH v10 07/27] ARM: davinci: dm355: " David Lechner
2018-05-09 17:25 ` [PATCH v10 08/27] ARM: davinci: dm365: " David Lechner
2018-05-09 17:25 ` [PATCH v10 09/27] ARM: davinci: dm644x: " David Lechner
2018-05-09 17:25 ` [PATCH v10 10/27] ARM: davinci: dm646x: " David Lechner
2018-05-09 17:25 ` [PATCH v10 11/27] ARM: davinci: da8xx: add new USB PHY " David Lechner
2018-05-09 17:25 ` [PATCH v10 12/27] ARM: davinci: da8xx: add new sata_refclk " David Lechner
2018-05-09 17:25 ` [PATCH v10 13/27] ARM: davinci: remove CONFIG_DAVINCI_RESET_CLOCKS David Lechner
2018-05-09 17:25 ` [PATCH v10 14/27] ARM: davinci_all_defconfig: " David Lechner
2018-05-09 17:25 ` [PATCH v10 15/27] ARM: davinci: switch to common clock framework David Lechner
2018-05-09 17:25 ` [PATCH v10 16/27] ARM: davinci: da830: Remove legacy clock init David Lechner
2018-05-09 17:25 ` [PATCH v10 17/27] ARM: davinci: da850: " David Lechner
2018-05-09 17:25 ` [PATCH v10 18/27] ARM: davinci: dm355: " David Lechner
2018-05-09 17:25 ` [PATCH v10 19/27] ARM: davinci: dm365: " David Lechner
2018-05-09 17:25 ` [PATCH v10 20/27] ARM: davinci: dm644x: " David Lechner
2018-05-09 17:26 ` [PATCH v10 21/27] ARM: davinci: dm646x: " David Lechner
2018-05-09 17:26 ` [PATCH v10 22/27] ARM: davinci: da8xx: Remove legacy USB and SATA " David Lechner
2018-05-09 17:26 ` [PATCH v10 23/27] ARM: davinci: remove legacy clocks David Lechner
2018-05-09 17:26 ` [PATCH v10 24/27] dt-bindings: timer: new bindings for TI DaVinci timer David Lechner
2018-05-18 14:24 ` Rob Herring
2018-05-09 17:26 ` [PATCH v10 25/27] ARM: davinci: add device tree support to timer David Lechner
2018-05-17 14:35 ` Sekhar Nori
2018-05-17 15:09 ` David Lechner
2018-05-18 6:05 ` Sekhar Nori
2018-05-18 15:35 ` David Lechner
2018-05-09 17:26 ` [PATCH v10 26/27] ARM: davinci: da8xx-dt: switch to device tree clocks David Lechner
2018-05-09 17:26 ` [PATCH v10 27/27] ARM: dts: da850: Add clocks David Lechner
2018-05-11 15:26 ` [PATCH v10 00/27] ARM: davinci: convert to common clock framework Sekhar Nori
2018-05-12 21:11 ` David Lechner
2018-05-14 0:40 ` Adam Ford
2018-05-14 1:50 ` David Lechner
2018-05-15 9:25 ` Bartosz Golaszewski
2018-05-15 22:44 ` Adam Ford
2018-05-16 0:31 ` David Lechner
2018-05-16 7:47 ` Bartosz Golaszewski
2018-05-16 10:43 ` Sekhar Nori
2018-05-17 0:46 ` Adam Ford
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180509172606.29387-3-david@lechnology.com \
--to=david@lechnology.com \
--cc=aford173@gmail.com \
--cc=bgolaszewski@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@baylibre.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).