From mboxrd@z Thu Jan 1 00:00:00 1970 From: Paul Cercueil Subject: [PATCH v3 7/8] MIPS: qi_lb60: Enable the jz4740-wdt driver Date: Thu, 10 May 2018 20:47:50 +0200 Message-ID: <20180510184751.13416-7-paul@crapouillou.net> References: <20180510184751.13416-1-paul@crapouillou.net> Return-path: In-Reply-To: <20180510184751.13416-1-paul@crapouillou.net> Sender: linux-kernel-owner@vger.kernel.org To: Guenter Roeck , Rob Herring , Mark Rutland , Ralf Baechle , James Hogan Cc: Wim Van Sebroeck , Mathieu Malaterre , linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, Paul Cercueil List-Id: devicetree@vger.kernel.org The watchdog is an useful piece of hardware, so there's no reason not to enable it. Besides, this is important for restart to work after the change in the next commit. This commit enables the Kconfig option in the qi_lb60 defconfig. Signed-off-by: Paul Cercueil Acked-by: James Hogan --- arch/mips/configs/qi_lb60_defconfig | 2 ++ 1 file changed, 2 insertions(+) v2: No change v3: No change diff --git a/arch/mips/configs/qi_lb60_defconfig b/arch/mips/configs/qi_lb60_defconfig index 3b02ff9a7c64..d8b7211a7b0f 100644 --- a/arch/mips/configs/qi_lb60_defconfig +++ b/arch/mips/configs/qi_lb60_defconfig @@ -72,6 +72,8 @@ CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_JZ4740=y CONFIG_CHARGER_GPIO=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_JZ4740_WDT=y CONFIG_MFD_JZ4740_ADC=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y -- 2.11.0