From: Krzysztof Kozlowski <krzk@kernel.org>
To: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com,
m.szyprowski@samsung.com
Subject: Re: [PATCH] ARM: dts: exynos: Use dedicated DT bindings for Odroid X/X2, U3
Date: Sun, 13 May 2018 14:24:12 +0200 [thread overview]
Message-ID: <20180513122412.shxdxtxt2phb46l5@kozik-lap> (raw)
In-Reply-To: <20180511080947.3057-1-s.nawrocki@samsung.com>
On Fri, May 11, 2018 at 10:09:47AM +0200, Sylwester Nawrocki wrote:
> Use dedicated Odroid audio subsystem DT bindings instead of the simple-card.
> This adds support for audio on the HDMI interface.
How about changing the subject to "Add suppor for audio over HDMI for
Odroid X/X2/U3"?
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
> ---
> arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 33 ++++++++++++++-----------
> arch/arm/boot/dts/exynos4412-odroidu3.dts | 7 +++---
> arch/arm/boot/dts/exynos4412-odroidx.dts | 7 +++---
> 3 files changed, 27 insertions(+), 20 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> index d7ad07fd48f9..bad08e70358a 100644
> --- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
> @@ -37,20 +37,12 @@
> };
>
> sound: sound {
> - compatible = "simple-audio-card";
> -
> - simple-audio-card,format = "i2s";
> - simple-audio-card,bitclock-master = <&link0_codec>;
> - simple-audio-card,frame-master = <&link0_codec>;
> -
> - simple-audio-card,cpu {
> + cpu {
> sound-dai = <&i2s0 0>;
> - system-clock-frequency = <19200000>;
> };
>
> - link0_codec: simple-audio-card,codec {
> - sound-dai = <&max98090>;
> - clocks = <&i2s0 CLK_I2S_CDCLK>;
> + codec {
> + sound-dai = <&hdmi>, <&max98090>;
> };
> };
>
> @@ -142,14 +134,25 @@
> pinctrl-0 = <>;
> };
>
> +&clock {
> + assigned-clocks = <&clock CLK_FOUT_EPLL>;
> + assigned-clock-rates = <45158401>;
> +};
> +
> &clock_audss {
> assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
> <&clock_audss EXYNOS_MOUT_I2S>,
> <&clock_audss EXYNOS_DOUT_SRP>,
> - <&clock_audss EXYNOS_DOUT_AUD_BUS>;
> + <&clock_audss EXYNOS_DOUT_AUD_BUS>,
> + <&clock_audss EXYNOS_DOUT_I2S>;
> +
> assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
> - <&clock_audss EXYNOS_MOUT_AUDSS>;
> - assigned-clock-rates = <0>, <0>, <192000000>, <19200000>;
> + <&clock_audss EXYNOS_MOUT_AUDSS>;
> +
> + assigned-clock-rates = <0>, <0>,
> + <196608001>,
> + <(196608001 / 2)>,
> + <(196608001 / 8)>;
> };
>
> &cpu0 {
> @@ -498,6 +501,8 @@
> pinctrl-0 = <&i2s0_bus>;
> pinctrl-names = "default";
> status = "okay";
> + assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
> + assigned-clock-parents = <&clock_audss EXYNOS_SCLK_I2S>;
> };
>
> &mixer {
> diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> index bdcd4523cc1c..7a94a423097d 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidu3.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts
> @@ -113,11 +113,12 @@
> };
>
> &sound {
> - simple-audio-card,name = "Odroid-U3";
> - simple-audio-card,widgets =
> + compatible = "hardkernel,odroid-xu4-audio";
The compatible is the same for all users using DTSI so it could be moved
to the exynos4412-odroid-common.dtsi itself.
Best regards,
Krzysztof
> + model = "Odroid-U3";
> + samsung,audio-widgets =
> "Headphone", "Headphone Jack",
> "Speakers", "Speakers";
> - simple-audio-card,routing =
> + samsung,audio-routing =
> "Headphone Jack", "HPL",
> "Headphone Jack", "HPR",
> "Headphone Jack", "MICBIAS",
> diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
> index 2dff129bc2ad..f0d5037f3a5d 100644
> --- a/arch/arm/boot/dts/exynos4412-odroidx.dts
> +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
> @@ -97,12 +97,13 @@
> };
>
> &sound {
> - simple-audio-card,name = "Odroid-X";
> - simple-audio-card,widgets =
> + compatible = "hardkernel,odroid-xu4-audio";
> + model = "Odroid-X";
> + samsung,audio-widgets =
> "Headphone", "Headphone Jack",
> "Microphone", "Mic Jack",
> "Microphone", "DMIC";
> - simple-audio-card,routing =
> + samsung,audio-routing =
> "Headphone Jack", "HPL",
> "Headphone Jack", "HPR",
> "IN1", "Mic Jack",
> --
> 2.14.2
>
next prev parent reply other threads:[~2018-05-13 12:24 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20180511081032epcas2p30f381cf699cb7524d9a143390e9c74b5@epcas2p3.samsung.com>
2018-05-11 8:09 ` [PATCH] ARM: dts: exynos: Use dedicated DT bindings for Odroid X/X2, U3 Sylwester Nawrocki
2018-05-13 12:24 ` Krzysztof Kozlowski [this message]
2018-05-14 8:01 ` Sylwester Nawrocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180513122412.shxdxtxt2phb46l5@kozik-lap \
--to=krzk@kernel.org \
--cc=b.zolnierkie@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=robh+dt@kernel.org \
--cc=s.nawrocki@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox